From: Palmer Dabbelt <palmer@sifive.com>
To: Anup Patel <Anup.Patel@wdc.com>
Cc: aou@eecs.berkeley.edu, Anup Patel <Anup.Patel@wdc.com>,
linux-kernel@vger.kernel.org, rppt@linux.ibm.com,
Christoph Hellwig <hch@infradead.org>,
Atish Patra <Atish.Patra@wdc.com>,
Paul Walmsley <paul.walmsley@sifive.com>,
linux-riscv@lists.infradead.org
Subject: Re: [PATCH 1/3] RISC-V: Add separate defconfig for 32bit systems
Date: Tue, 09 Apr 2019 09:44:01 -0700 (PDT) [thread overview]
Message-ID: <mhng-02f905c7-fb28-4997-9769-2cb88c581881@palmer-si-x1c4> (raw)
In-Reply-To: <20190312220752.128141-2-anup.patel@wdc.com>
On Tue, 12 Mar 2019 15:08:12 PDT (-0700), Anup Patel wrote:
> This patch adds rv32_defconfig for 32bit systems. The only
> difference between rv32_defconfig and defconfig is that
> rv32_defconfig has CONFIG_ARCH_RV32I=y.
Thanks. I think it makes sense to have this in 5.1 so I'm going to take it
into the next RC.
>
> Signed-off-by: Anup Patel <anup.patel@wdc.com>
> ---
> arch/riscv/configs/rv32_defconfig | 84 +++++++++++++++++++++++++++++++
> 1 file changed, 84 insertions(+)
> create mode 100644 arch/riscv/configs/rv32_defconfig
>
> diff --git a/arch/riscv/configs/rv32_defconfig b/arch/riscv/configs/rv32_defconfig
> new file mode 100644
> index 000000000000..1a911ed8e772
> --- /dev/null
> +++ b/arch/riscv/configs/rv32_defconfig
> @@ -0,0 +1,84 @@
> +CONFIG_SYSVIPC=y
> +CONFIG_POSIX_MQUEUE=y
> +CONFIG_IKCONFIG=y
> +CONFIG_IKCONFIG_PROC=y
> +CONFIG_CGROUPS=y
> +CONFIG_CGROUP_SCHED=y
> +CONFIG_CFS_BANDWIDTH=y
> +CONFIG_CGROUP_BPF=y
> +CONFIG_NAMESPACES=y
> +CONFIG_USER_NS=y
> +CONFIG_CHECKPOINT_RESTORE=y
> +CONFIG_BLK_DEV_INITRD=y
> +CONFIG_EXPERT=y
> +CONFIG_BPF_SYSCALL=y
> +CONFIG_ARCH_RV32I=y
> +CONFIG_SMP=y
> +CONFIG_MODULES=y
> +CONFIG_MODULE_UNLOAD=y
> +CONFIG_NET=y
> +CONFIG_PACKET=y
> +CONFIG_UNIX=y
> +CONFIG_INET=y
> +CONFIG_IP_MULTICAST=y
> +CONFIG_IP_ADVANCED_ROUTER=y
> +CONFIG_IP_PNP=y
> +CONFIG_IP_PNP_DHCP=y
> +CONFIG_IP_PNP_BOOTP=y
> +CONFIG_IP_PNP_RARP=y
> +CONFIG_NETLINK_DIAG=y
> +CONFIG_PCI=y
> +CONFIG_PCIEPORTBUS=y
> +CONFIG_PCI_HOST_GENERIC=y
> +CONFIG_PCIE_XILINX=y
> +CONFIG_DEVTMPFS=y
> +CONFIG_BLK_DEV_LOOP=y
> +CONFIG_VIRTIO_BLK=y
> +CONFIG_BLK_DEV_SD=y
> +CONFIG_BLK_DEV_SR=y
> +CONFIG_ATA=y
> +CONFIG_SATA_AHCI=y
> +CONFIG_SATA_AHCI_PLATFORM=y
> +CONFIG_NETDEVICES=y
> +CONFIG_VIRTIO_NET=y
> +CONFIG_MACB=y
> +CONFIG_E1000E=y
> +CONFIG_R8169=y
> +CONFIG_MICROSEMI_PHY=y
> +CONFIG_INPUT_MOUSEDEV=y
> +CONFIG_SERIAL_8250=y
> +CONFIG_SERIAL_8250_CONSOLE=y
> +CONFIG_SERIAL_OF_PLATFORM=y
> +CONFIG_SERIAL_EARLYCON_RISCV_SBI=y
> +CONFIG_HVC_RISCV_SBI=y
> +# CONFIG_PTP_1588_CLOCK is not set
> +CONFIG_DRM=y
> +CONFIG_DRM_RADEON=y
> +CONFIG_FRAMEBUFFER_CONSOLE=y
> +CONFIG_USB=y
> +CONFIG_USB_XHCI_HCD=y
> +CONFIG_USB_XHCI_PLATFORM=y
> +CONFIG_USB_EHCI_HCD=y
> +CONFIG_USB_EHCI_HCD_PLATFORM=y
> +CONFIG_USB_OHCI_HCD=y
> +CONFIG_USB_OHCI_HCD_PLATFORM=y
> +CONFIG_USB_STORAGE=y
> +CONFIG_USB_UAS=y
> +CONFIG_VIRTIO_MMIO=y
> +CONFIG_SIFIVE_PLIC=y
> +CONFIG_EXT4_FS=y
> +CONFIG_EXT4_FS_POSIX_ACL=y
> +CONFIG_AUTOFS4_FS=y
> +CONFIG_MSDOS_FS=y
> +CONFIG_VFAT_FS=y
> +CONFIG_TMPFS=y
> +CONFIG_TMPFS_POSIX_ACL=y
> +CONFIG_NFS_FS=y
> +CONFIG_NFS_V4=y
> +CONFIG_NFS_V4_1=y
> +CONFIG_NFS_V4_2=y
> +CONFIG_ROOT_NFS=y
> +CONFIG_CRYPTO_USER_API_HASH=y
> +CONFIG_CRYPTO_DEV_VIRTIO=y
> +CONFIG_PRINTK_TIME=y
> +# CONFIG_RCU_TRACE is not set
> --
> 2.17.1
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
next prev parent reply other threads:[~2019-04-09 16:44 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-03-12 22:08 [PATCH 0/3] Boot RISC-V kernel from any 4KB aligned address Anup Patel
2019-03-12 22:08 ` [PATCH 1/3] RISC-V: Add separate defconfig for 32bit systems Anup Patel
2019-04-09 16:44 ` Palmer Dabbelt [this message]
2019-04-10 6:09 ` Anup Patel
2019-04-10 17:13 ` Palmer Dabbelt
2019-03-12 22:08 ` [PATCH 2/3] RISC-V: Make setup_vm() independent of GCC code model Anup Patel
2019-03-13 18:15 ` Mike Rapoport
2019-04-09 16:47 ` Palmer Dabbelt
2019-04-10 4:10 ` Anup Patel
2019-03-12 22:08 ` [PATCH 3/3] RISC-V: Allow booting kernel from any 4KB aligned address Anup Patel
2019-03-13 18:31 ` Mike Rapoport
2019-03-13 21:06 ` Anup Patel
2019-03-14 6:53 ` Mike Rapoport
2019-03-14 17:58 ` Anup Patel
2019-03-15 15:58 ` Mike Rapoport
2019-03-15 16:17 ` Anup Patel
2019-03-15 16:22 ` Anup Patel
2019-03-15 23:25 ` Anup Patel
2019-03-18 7:18 ` Mike Rapoport
2019-03-18 13:16 ` Anup Patel
2019-03-18 16:27 ` Mike Rapoport
2019-03-18 16:12 ` Paul Walmsley
2019-04-10 12:45 ` Nick Kossifidis
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=mhng-02f905c7-fb28-4997-9769-2cb88c581881@palmer-si-x1c4 \
--to=palmer@sifive.com \
--cc=Anup.Patel@wdc.com \
--cc=Atish.Patra@wdc.com \
--cc=aou@eecs.berkeley.edu \
--cc=hch@infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-riscv@lists.infradead.org \
--cc=paul.walmsley@sifive.com \
--cc=rppt@linux.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).