linux-rtc.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Paul Cercueil <paul@crapouillou.net>
To: Alessandro Zummo <a.zummo@towertech.it>,
	Alexandre Belloni <alexandre.belloni@bootlin.com>,
	Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>
Cc: od@zcrc.me, linux-rtc@vger.kernel.org,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	Paul Cercueil <paul@crapouillou.net>
Subject: [PATCH v2 3/3] dt-bindings: rtc: Convert and update jz4740-rtc doc to YAML
Date: Wed, 11 Mar 2020 19:23:18 +0100	[thread overview]
Message-ID: <20200311182318.22154-3-paul@crapouillou.net> (raw)
In-Reply-To: <20200311182318.22154-1-paul@crapouillou.net>

Convert the jz4740-rtc doc to YAML, and update it to reflect the new
changes in the driver:
- More compatible strings are specified, with fallbacks if needed,
- The vendor-specific properties are now properly prefixed with the
  'ingenic,' prefix.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
---
 .../bindings/rtc/ingenic,jz4740-rtc.txt       | 37 ---------
 .../devicetree/bindings/rtc/ingenic,rtc.yaml  | 83 +++++++++++++++++++
 2 files changed, 83 insertions(+), 37 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/rtc/ingenic,jz4740-rtc.txt
 create mode 100644 Documentation/devicetree/bindings/rtc/ingenic,rtc.yaml

diff --git a/Documentation/devicetree/bindings/rtc/ingenic,jz4740-rtc.txt b/Documentation/devicetree/bindings/rtc/ingenic,jz4740-rtc.txt
deleted file mode 100644
index 41c7ae18fd7b..000000000000
--- a/Documentation/devicetree/bindings/rtc/ingenic,jz4740-rtc.txt
+++ /dev/null
@@ -1,37 +0,0 @@
-JZ4740 and similar SoCs real-time clock driver
-
-Required properties:
-
-- compatible: One of:
-  - "ingenic,jz4740-rtc" - for use with the JZ4740 SoC
-  - "ingenic,jz4780-rtc" - for use with the JZ4780 SoC
-- reg: Address range of rtc register set
-- interrupts: IRQ number for the alarm interrupt
-- clocks: phandle to the "rtc" clock
-- clock-names: must be "rtc"
-
-Optional properties:
-- system-power-controller: To use this component as the
-  system power controller
-- reset-pin-assert-time-ms: Reset pin low-level assertion
-  time after wakeup (default 60ms; range 0-125ms if RTC clock
-  at 32 kHz)
-- min-wakeup-pin-assert-time-ms: Minimum wakeup pin assertion
-  time (default 100ms; range 0-2s if RTC clock at 32 kHz)
-
-Example:
-
-rtc@10003000 {
-	compatible = "ingenic,jz4740-rtc";
-	reg = <0x10003000 0x40>;
-
-	interrupt-parent = <&intc>;
-	interrupts = <32>;
-
-	clocks = <&rtc_clock>;
-	clock-names = "rtc";
-
-	system-power-controller;
-	reset-pin-assert-time-ms = <60>;
-	min-wakeup-pin-assert-time-ms = <100>;
-};
diff --git a/Documentation/devicetree/bindings/rtc/ingenic,rtc.yaml b/Documentation/devicetree/bindings/rtc/ingenic,rtc.yaml
new file mode 100644
index 000000000000..4206bf8a2469
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/ingenic,rtc.yaml
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/ingenic,rtc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ingenic SoCs Real-Time Clock DT bindings
+
+maintainers:
+  - Paul Cercueil <paul@crapouillou.net>
+
+allOf:
+  - $ref: rtc.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+        - ingenic,jz4740-rtc
+        - ingenic,jz4760-rtc
+      - items:
+        - const: ingenic,jz4725b-rtc
+        - const: ingenic,jz4740-rtc
+      - items:
+        - enum:
+          - ingenic,jz4770-rtc
+          - ingenic,jz4780-rtc
+        - const: ingenic,jz4760-rtc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: rtc
+
+  system-power-controller:
+    description: |
+      Indicates that the RTC is responsible for powering OFF
+      the system.
+    type: boolean
+
+  ingenic,reset-pin-assert-time-ms:
+    minimum: 0
+    maximum: 125
+    default: 60
+    description: |
+      Reset pin low-level assertion time after wakeup
+      (assuming RTC clock at 32 kHz)
+
+  ingenic,min-wakeup-pin-assert-time-ms:
+    minimum: 0
+    maximum: 2000
+    default: 100
+    description: |
+      Minimum wakeup pin assertion time
+      (assuming RTC clock at 32 kHz)
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+examples:
+  - |
+    #include <dt-bindings/clock/jz4740-cgu.h>
+    rtc_dev: rtc@10003000 {
+      compatible = "ingenic,jz4740-rtc";
+      reg = <0x10003000 0x40>;
+
+      interrupt-parent = <&intc>;
+      interrupts = <15>;
+
+      clocks = <&cgu JZ4740_CLK_RTC>;
+      clock-names = "rtc";
+    };
-- 
2.25.1


  parent reply	other threads:[~2020-03-11 18:23 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-03-11 18:23 [PATCH v2 1/3] rtc: jz4740: Add support for JZ4760 SoC Paul Cercueil
2020-03-11 18:23 ` [PATCH v2 2/3] rtc: jz4740: Rename vendor-specific DT properties Paul Cercueil
2020-03-24 10:10   ` Alexandre Belloni
2020-03-11 18:23 ` Paul Cercueil [this message]
2020-03-23 22:14   ` [PATCH v2 3/3] dt-bindings: rtc: Convert and update jz4740-rtc doc to YAML Rob Herring
2020-03-24 10:10   ` Alexandre Belloni
2020-03-24 10:09 ` [PATCH v2 1/3] rtc: jz4740: Add support for JZ4760 SoC Alexandre Belloni

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200311182318.22154-3-paul@crapouillou.net \
    --to=paul@crapouillou.net \
    --cc=a.zummo@towertech.it \
    --cc=alexandre.belloni@bootlin.com \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rtc@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=od@zcrc.me \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).