From: Mike Christie <michael.christie@oracle.com>
To: lduncan@suse.com, martin.petersen@oracle.com,
linux-scsi@vger.kernel.org,
james.bottomley@hansenpartnership.com
Cc: Mike Christie <michael.christie@oracle.com>
Subject: [PATCH 1/1] scsi: iscsi: Fix iface sysfs attr detection
Date: Wed, 30 Jun 2021 19:25:59 -0500 [thread overview]
Message-ID: <20210701002559.89533-1-michael.christie@oracle.com> (raw)
A ISCSI_IFACE_PARAM can have the same value as a ISCSI_NET_PARAM so when
iscsi_iface_attr_is_visible tries to figure out the type by just checking
the value, we can collide and return the wrong type. When we call into the
driver we might not match and return that we don't want attr visible in
sysfs. The patch fixes this by setting the type when we figure out what
the param is.
Fixes: 3e0f65b34cc9 ("[SCSI] iscsi_transport: Additional parameters for
network settings")
Signed-off-by: Mike Christie <michael.christie@oracle.com>
---
drivers/scsi/scsi_transport_iscsi.c | 90 +++++++++++------------------
1 file changed, 34 insertions(+), 56 deletions(-)
diff --git a/drivers/scsi/scsi_transport_iscsi.c b/drivers/scsi/scsi_transport_iscsi.c
index 441f0152193f..01f6445b47c9 100644
--- a/drivers/scsi/scsi_transport_iscsi.c
+++ b/drivers/scsi/scsi_transport_iscsi.c
@@ -440,39 +440,10 @@ static umode_t iscsi_iface_attr_is_visible(struct kobject *kobj,
struct device *dev = container_of(kobj, struct device, kobj);
struct iscsi_iface *iface = iscsi_dev_to_iface(dev);
struct iscsi_transport *t = iface->transport;
- int param;
- int param_type;
+ int param = -1;
if (attr == &dev_attr_iface_enabled.attr)
param = ISCSI_NET_PARAM_IFACE_ENABLE;
- else if (attr == &dev_attr_iface_vlan_id.attr)
- param = ISCSI_NET_PARAM_VLAN_ID;
- else if (attr == &dev_attr_iface_vlan_priority.attr)
- param = ISCSI_NET_PARAM_VLAN_PRIORITY;
- else if (attr == &dev_attr_iface_vlan_enabled.attr)
- param = ISCSI_NET_PARAM_VLAN_ENABLED;
- else if (attr == &dev_attr_iface_mtu.attr)
- param = ISCSI_NET_PARAM_MTU;
- else if (attr == &dev_attr_iface_port.attr)
- param = ISCSI_NET_PARAM_PORT;
- else if (attr == &dev_attr_iface_ipaddress_state.attr)
- param = ISCSI_NET_PARAM_IPADDR_STATE;
- else if (attr == &dev_attr_iface_delayed_ack_en.attr)
- param = ISCSI_NET_PARAM_DELAYED_ACK_EN;
- else if (attr == &dev_attr_iface_tcp_nagle_disable.attr)
- param = ISCSI_NET_PARAM_TCP_NAGLE_DISABLE;
- else if (attr == &dev_attr_iface_tcp_wsf_disable.attr)
- param = ISCSI_NET_PARAM_TCP_WSF_DISABLE;
- else if (attr == &dev_attr_iface_tcp_wsf.attr)
- param = ISCSI_NET_PARAM_TCP_WSF;
- else if (attr == &dev_attr_iface_tcp_timer_scale.attr)
- param = ISCSI_NET_PARAM_TCP_TIMER_SCALE;
- else if (attr == &dev_attr_iface_tcp_timestamp_en.attr)
- param = ISCSI_NET_PARAM_TCP_TIMESTAMP_EN;
- else if (attr == &dev_attr_iface_cache_id.attr)
- param = ISCSI_NET_PARAM_CACHE_ID;
- else if (attr == &dev_attr_iface_redirect_en.attr)
- param = ISCSI_NET_PARAM_REDIRECT_EN;
else if (attr == &dev_attr_iface_def_taskmgmt_tmo.attr)
param = ISCSI_IFACE_PARAM_DEF_TASKMGMT_TMO;
else if (attr == &dev_attr_iface_header_digest.attr)
@@ -509,6 +480,38 @@ static umode_t iscsi_iface_attr_is_visible(struct kobject *kobj,
param = ISCSI_IFACE_PARAM_STRICT_LOGIN_COMP_EN;
else if (attr == &dev_attr_iface_initiator_name.attr)
param = ISCSI_IFACE_PARAM_INITIATOR_NAME;
+
+ if (param != -1)
+ return t->attr_is_visible(ISCSI_IFACE_PARAM, param);
+
+ if (attr == &dev_attr_iface_vlan_id.attr)
+ param = ISCSI_NET_PARAM_VLAN_ID;
+ else if (attr == &dev_attr_iface_vlan_priority.attr)
+ param = ISCSI_NET_PARAM_VLAN_PRIORITY;
+ else if (attr == &dev_attr_iface_vlan_enabled.attr)
+ param = ISCSI_NET_PARAM_VLAN_ENABLED;
+ else if (attr == &dev_attr_iface_mtu.attr)
+ param = ISCSI_NET_PARAM_MTU;
+ else if (attr == &dev_attr_iface_port.attr)
+ param = ISCSI_NET_PARAM_PORT;
+ else if (attr == &dev_attr_iface_ipaddress_state.attr)
+ param = ISCSI_NET_PARAM_IPADDR_STATE;
+ else if (attr == &dev_attr_iface_delayed_ack_en.attr)
+ param = ISCSI_NET_PARAM_DELAYED_ACK_EN;
+ else if (attr == &dev_attr_iface_tcp_nagle_disable.attr)
+ param = ISCSI_NET_PARAM_TCP_NAGLE_DISABLE;
+ else if (attr == &dev_attr_iface_tcp_wsf_disable.attr)
+ param = ISCSI_NET_PARAM_TCP_WSF_DISABLE;
+ else if (attr == &dev_attr_iface_tcp_wsf.attr)
+ param = ISCSI_NET_PARAM_TCP_WSF;
+ else if (attr == &dev_attr_iface_tcp_timer_scale.attr)
+ param = ISCSI_NET_PARAM_TCP_TIMER_SCALE;
+ else if (attr == &dev_attr_iface_tcp_timestamp_en.attr)
+ param = ISCSI_NET_PARAM_TCP_TIMESTAMP_EN;
+ else if (attr == &dev_attr_iface_cache_id.attr)
+ param = ISCSI_NET_PARAM_CACHE_ID;
+ else if (attr == &dev_attr_iface_redirect_en.attr)
+ param = ISCSI_NET_PARAM_REDIRECT_EN;
else if (iface->iface_type == ISCSI_IFACE_TYPE_IPV4) {
if (attr == &dev_attr_ipv4_iface_ipaddress.attr)
param = ISCSI_NET_PARAM_IPV4_ADDR;
@@ -599,32 +602,7 @@ static umode_t iscsi_iface_attr_is_visible(struct kobject *kobj,
return 0;
}
- switch (param) {
- case ISCSI_IFACE_PARAM_DEF_TASKMGMT_TMO:
- case ISCSI_IFACE_PARAM_HDRDGST_EN:
- case ISCSI_IFACE_PARAM_DATADGST_EN:
- case ISCSI_IFACE_PARAM_IMM_DATA_EN:
- case ISCSI_IFACE_PARAM_INITIAL_R2T_EN:
- case ISCSI_IFACE_PARAM_DATASEQ_INORDER_EN:
- case ISCSI_IFACE_PARAM_PDU_INORDER_EN:
- case ISCSI_IFACE_PARAM_ERL:
- case ISCSI_IFACE_PARAM_MAX_RECV_DLENGTH:
- case ISCSI_IFACE_PARAM_FIRST_BURST:
- case ISCSI_IFACE_PARAM_MAX_R2T:
- case ISCSI_IFACE_PARAM_MAX_BURST:
- case ISCSI_IFACE_PARAM_CHAP_AUTH_EN:
- case ISCSI_IFACE_PARAM_BIDI_CHAP_EN:
- case ISCSI_IFACE_PARAM_DISCOVERY_AUTH_OPTIONAL:
- case ISCSI_IFACE_PARAM_DISCOVERY_LOGOUT_EN:
- case ISCSI_IFACE_PARAM_STRICT_LOGIN_COMP_EN:
- case ISCSI_IFACE_PARAM_INITIATOR_NAME:
- param_type = ISCSI_IFACE_PARAM;
- break;
- default:
- param_type = ISCSI_NET_PARAM;
- }
-
- return t->attr_is_visible(param_type, param);
+ return t->attr_is_visible(ISCSI_NET_PARAM, param);
}
static struct attribute *iscsi_iface_attrs[] = {
--
2.25.1
next reply other threads:[~2021-07-01 0:26 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-07-01 0:25 Mike Christie [this message]
2021-07-21 3:22 ` [PATCH 1/1] scsi: iscsi: Fix iface sysfs attr detection Martin K. Petersen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210701002559.89533-1-michael.christie@oracle.com \
--to=michael.christie@oracle.com \
--cc=james.bottomley@hansenpartnership.com \
--cc=lduncan@suse.com \
--cc=linux-scsi@vger.kernel.org \
--cc=martin.petersen@oracle.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).