From: Bart Van Assche <bvanassche@acm.org>
To: "Martin K . Petersen" <martin.petersen@oracle.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>,
Adrian Hunter <adrian.hunter@intel.com>,
linux-scsi@vger.kernel.org, Bart Van Assche <bvanassche@acm.org>,
"James E.J. Bottomley" <jejb@linux.ibm.com>,
Bean Huo <beanhuo@micron.com>, Can Guo <cang@codeaurora.org>,
Avri Altman <avri.altman@wdc.com>,
Stanley Chu <stanley.chu@mediatek.com>,
Asutosh Das <asutoshd@codeaurora.org>
Subject: [PATCH v2 16/20] scsi: ufs: Fix a kernel crash during shutdown
Date: Fri, 19 Nov 2021 11:57:39 -0800 [thread overview]
Message-ID: <20211119195743.2817-17-bvanassche@acm.org> (raw)
In-Reply-To: <20211119195743.2817-1-bvanassche@acm.org>
Fix the following kernel crash:
Unable to handle kernel paging request at virtual address ffffffc91e735000
Call trace:
__queue_work+0x26c/0x624
queue_work_on+0x6c/0xf0
ufshcd_hold+0x12c/0x210
__ufshcd_wl_suspend+0xc0/0x400
ufshcd_wl_shutdown+0xb8/0xcc
device_shutdown+0x184/0x224
kernel_restart+0x4c/0x124
__arm64_sys_reboot+0x194/0x264
el0_svc_common+0xc8/0x1d4
do_el0_svc+0x30/0x8c
el0_svc+0x20/0x30
el0_sync_handler+0x84/0xe4
el0_sync+0x1bc/0x1c0
Fix this crash by ungating the clock before destroying the work queue
on which clock gating work is queued.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
---
drivers/scsi/ufs/ufshcd.c | 15 ++++++++++-----
1 file changed, 10 insertions(+), 5 deletions(-)
diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index 7e27d6436889..6a743da7d2db 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -1667,7 +1667,8 @@ int ufshcd_hold(struct ufs_hba *hba, bool async)
bool flush_result;
unsigned long flags;
- if (!ufshcd_is_clkgating_allowed(hba))
+ if (!ufshcd_is_clkgating_allowed(hba) ||
+ !hba->clk_gating.is_initialized)
goto out;
spin_lock_irqsave(hba->host->host_lock, flags);
hba->clk_gating.active_reqs++;
@@ -1827,7 +1828,7 @@ static void __ufshcd_release(struct ufs_hba *hba)
if (hba->clk_gating.active_reqs || hba->clk_gating.is_suspended ||
hba->ufshcd_state != UFSHCD_STATE_OPERATIONAL ||
- hba->outstanding_tasks ||
+ hba->outstanding_tasks || !hba->clk_gating.is_initialized ||
hba->active_uic_cmd || hba->uic_async_done ||
hba->clk_gating.state == CLKS_OFF)
return;
@@ -1962,11 +1963,15 @@ static void ufshcd_exit_clk_gating(struct ufs_hba *hba)
{
if (!hba->clk_gating.is_initialized)
return;
+
ufshcd_remove_clk_gating_sysfs(hba);
- cancel_work_sync(&hba->clk_gating.ungate_work);
- cancel_delayed_work_sync(&hba->clk_gating.gate_work);
- destroy_workqueue(hba->clk_gating.clk_gating_workq);
+
+ /* Ungate the clock if necessary. */
+ ufshcd_hold(hba, false);
hba->clk_gating.is_initialized = false;
+ ufshcd_release(hba);
+
+ destroy_workqueue(hba->clk_gating.clk_gating_workq);
}
/* Must be called with host lock acquired */
next prev parent reply other threads:[~2021-11-19 19:58 UTC|newest]
Thread overview: 72+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-11-19 19:57 [PATCH v2 00/20] UFS patches for kernel v5.17 Bart Van Assche
2021-11-19 19:57 ` [PATCH v2 01/20] block: Add a flag for internal commands Bart Van Assche
2021-11-22 8:46 ` John Garry
2021-11-22 17:38 ` Bart Van Assche
2021-11-19 19:57 ` [PATCH v2 02/20] scsi: core: Unexport scsi_track_queue_full() Bart Van Assche
2021-11-19 19:57 ` [PATCH v2 03/20] scsi: core: Fix scsi_device_max_queue_depth() Bart Van Assche
2021-11-19 19:57 ` [PATCH v2 04/20] scsi: core: Fix a race between scsi_done() and scsi_times_out() Bart Van Assche
2021-11-19 19:57 ` [PATCH v2 05/20] scsi: core: Add support for internal commands Bart Van Assche
2021-11-22 8:58 ` John Garry
2021-11-22 17:46 ` Bart Van Assche
2021-11-22 18:08 ` John Garry
2021-11-22 19:04 ` Bart Van Assche
2021-11-23 8:13 ` Hannes Reinecke
2021-11-23 17:46 ` Bart Van Assche
2021-11-23 19:18 ` Bart Van Assche
2021-11-24 6:33 ` Hannes Reinecke
2021-11-19 19:57 ` [PATCH v2 06/20] scsi: core: Add support for reserved tags Bart Van Assche
2021-11-22 8:15 ` John Garry
2021-11-22 17:25 ` Bart Van Assche
2021-11-22 18:13 ` John Garry
2021-11-19 19:57 ` [PATCH v2 07/20] scsi: ufs: Rename a function argument Bart Van Assche
2021-11-22 20:25 ` Bean Huo
2021-11-19 19:57 ` [PATCH v2 08/20] scsi: ufs: Remove is_rpmb_wlun() Bart Van Assche
2021-11-19 19:57 ` [PATCH v2 09/20] scsi: ufs: Remove the sdev_rpmb member Bart Van Assche
2021-11-19 19:57 ` [PATCH v2 10/20] scsi: ufs: Remove dead code Bart Van Assche
2021-11-24 11:11 ` Adrian Hunter
2021-11-29 19:12 ` Bart Van Assche
2021-11-19 19:57 ` [PATCH v2 11/20] scsi: ufs: Switch to scsi_(get|put)_internal_cmd() Bart Van Assche
2021-11-23 12:20 ` Bean Huo
2021-11-23 17:54 ` Bart Van Assche
2021-11-23 19:41 ` Bart Van Assche
2021-11-24 18:18 ` Bean Huo
2021-11-24 11:02 ` Adrian Hunter
2021-11-24 11:15 ` Adrian Hunter
2021-11-29 19:32 ` Bart Van Assche
2021-11-30 6:41 ` Adrian Hunter
2021-11-30 17:51 ` Bart Van Assche
2021-11-30 19:15 ` Adrian Hunter
2021-11-30 19:21 ` Bart Van Assche
2021-11-19 19:57 ` [PATCH v2 12/20] scsi: ufs: Rework ufshcd_change_queue_depth() Bart Van Assche
2021-11-19 19:57 ` [PATCH v2 13/20] scsi: ufs: Fix a deadlock in the error handler Bart Van Assche
2021-11-30 8:54 ` Bean Huo
2021-11-30 17:52 ` Bart Van Assche
2021-11-30 19:32 ` Bart Van Assche
2021-12-01 13:44 ` Bean Huo
2021-12-01 18:31 ` Bart Van Assche
2021-11-19 19:57 ` [PATCH v2 14/20] scsi: ufs: Introduce ufshcd_release_scsi_cmd() Bart Van Assche
2021-11-24 12:03 ` Adrian Hunter
2021-11-30 18:00 ` Bart Van Assche
2021-11-30 19:02 ` Adrian Hunter
2021-11-30 19:16 ` Bart Van Assche
2021-11-19 19:57 ` [PATCH v2 15/20] scsi: ufs: Improve SCSI abort handling Bart Van Assche
2021-11-24 12:28 ` Adrian Hunter
2021-11-30 4:13 ` Bart Van Assche
2021-11-19 19:57 ` Bart Van Assche [this message]
2021-11-19 19:57 ` [PATCH v2 17/20] scsi: ufs: Stop using the clock scaling lock in the error handler Bart Van Assche
2021-11-19 19:57 ` [PATCH v2 18/20] scsi: ufs: Optimize the command queueing code Bart Van Assche
2021-11-22 17:46 ` Asutosh Das (asd)
2021-11-22 18:13 ` Bart Van Assche
2021-11-22 23:02 ` Asutosh Das (asd)
2021-11-22 23:48 ` Bart Van Assche
2021-11-23 18:24 ` Asutosh Das (asd)
2021-12-01 18:33 ` Bart Van Assche
2021-11-19 19:57 ` [PATCH v2 19/20] scsi: ufs: Implement polling support Bart Van Assche
2021-11-30 8:43 ` Bean Huo
2021-11-30 8:57 ` Avri Altman
2021-11-30 9:15 ` Bean Huo
2021-11-30 14:26 ` Bart Van Assche
2021-11-30 15:40 ` Bean Huo
2021-11-30 17:34 ` Bart Van Assche
2021-11-30 17:37 ` Bart Van Assche
2021-11-19 19:57 ` [PATCH v2 20/20] scsi: ufs: Fix race conditions related to driver data Bart Van Assche
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211119195743.2817-17-bvanassche@acm.org \
--to=bvanassche@acm.org \
--cc=adrian.hunter@intel.com \
--cc=asutoshd@codeaurora.org \
--cc=avri.altman@wdc.com \
--cc=beanhuo@micron.com \
--cc=cang@codeaurora.org \
--cc=jaegeuk@kernel.org \
--cc=jejb@linux.ibm.com \
--cc=linux-scsi@vger.kernel.org \
--cc=martin.petersen@oracle.com \
--cc=stanley.chu@mediatek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).