From: Hannes Reinecke <hare@suse.de>
To: John Garry <john.garry@huawei.com>,
don.brace@microsemi.com, hare@suse.com
Cc: axboe@kernel.dk, jejb@linux.ibm.com, martin.petersen@oracle.com,
kashyap.desai@broadcom.com, sumit.saxena@broadcom.com,
ming.lei@redhat.com, bvanassche@acm.org, hch@lst.de,
shivasharan.srikanteshwara@broadcom.com,
linux-block@vger.kernel.org, linux-scsi@vger.kernel.org,
esc.storagedev@microsemi.com, chenxiang66@hisilicon.com,
megaraidlinux.pdl@broadcom.com
Subject: Re: [PATCH RFC v7 11/12] smartpqi: enable host tagset
Date: Tue, 14 Jul 2020 16:02:51 +0200 [thread overview]
Message-ID: <f4425d8b-d132-c5c7-c854-2be948795bda@suse.de> (raw)
In-Reply-To: <a8afea5c-97f2-ac84-f4b5-155963bebb2c@huawei.com>
On 7/14/20 3:16 PM, John Garry wrote:
> Hi Hannes,
>
>> static struct pqi_io_request *pqi_alloc_io_request(
>> - struct pqi_ctrl_info *ctrl_info)
>> + struct pqi_ctrl_info *ctrl_info, struct scsi_cmnd *scmd)
>> {
>> struct pqi_io_request *io_request;
>> + unsigned int limit = PQI_RESERVED_IO_SLOTS;
>> u16 i = ctrl_info->next_io_request_slot; /* benignly racy */
>> - while (1) {
>> + if (scmd) {
>> + u32 blk_tag = blk_mq_unique_tag(scmd->request);
>> +
>> + i = blk_mq_unique_tag_to_tag(blk_tag) + limit;
>> io_request = &ctrl_info->io_request_pool[i];
>
> This looks ok
>
>> - if (atomic_inc_return(&io_request->refcount) == 1)
>> - break;
>> - atomic_dec(&io_request->refcount);
>> - i = (i + 1) % ctrl_info->max_io_slots;
>> + if (WARN_ON(atomic_inc_return(&io_request->refcount) > 1)) {
>> + atomic_dec(&io_request->refcount);
>> + return NULL;
>> + }
>> + } else {
>> + while (1) {
>> + io_request = &ctrl_info->io_request_pool[i];
>> + if (atomic_inc_return(&io_request->refcount) == 1)
>> + break;
>> + atomic_dec(&io_request->refcount);
>> + i = (i + 1) % limit;
>
> To me, the range we use here looks incorrect. I would assume we should
> restrict range to [max_io_slots - PQI_RESERVED_IO_SLOTS, max_io_slots).
>
> But then your reserved commands support would solve that.
>
This branch of the 'if' condition will only be taken for internal
commands, for which we only allow up to PQI_RESERVED_IO_SLOTS.
And we set the 'normal' I/O commands above at an offset, so we're fine here.
Cheers,
Hannes
--
Dr. Hannes Reinecke Kernel Storage Architect
hare@suse.de +49 911 74053 688
SUSE Software Solutions Germany GmbH, Maxfeldstr. 5, 90409 Nürnberg
HRB 36809 (AG Nürnberg), GF: Felix Imendörffer
next prev parent reply other threads:[~2020-07-14 14:02 UTC|newest]
Thread overview: 123+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-06-10 17:29 [PATCH RFC v7 00/12] blk-mq/scsi: Provide hostwide shared tags for SCSI HBAs John Garry
2020-06-10 17:29 ` [PATCH RFC v7 01/12] blk-mq: rename BLK_MQ_F_TAG_SHARED as BLK_MQ_F_TAG_QUEUE_SHARED John Garry
2020-06-10 17:29 ` [PATCH RFC v7 02/12] blk-mq: rename blk_mq_update_tag_set_depth() John Garry
2020-06-11 2:57 ` Ming Lei
2020-06-11 8:26 ` John Garry
2020-06-23 11:25 ` John Garry
2020-06-23 14:23 ` Hannes Reinecke
2020-06-24 8:13 ` Kashyap Desai
2020-06-29 16:18 ` John Garry
2020-08-10 16:51 ` Kashyap Desai
2020-08-11 8:01 ` John Garry
2020-08-11 16:34 ` Kashyap Desai
2020-06-10 17:29 ` [PATCH RFC v7 03/12] blk-mq: Use pointers for blk_mq_tags bitmap tags John Garry
2020-06-10 17:29 ` [PATCH RFC v7 04/12] blk-mq: Facilitate a shared sbitmap per tagset John Garry
2020-06-11 3:37 ` Ming Lei
2020-06-11 10:09 ` John Garry
2020-06-10 17:29 ` [PATCH RFC v7 05/12] blk-mq: Record nr_active_requests per queue for when using shared sbitmap John Garry
2020-06-11 4:04 ` Ming Lei
2020-06-11 10:22 ` John Garry
2020-06-10 17:29 ` [PATCH RFC v7 06/12] blk-mq: Record active_queues_shared_sbitmap per tag_set " John Garry
2020-06-11 13:16 ` Hannes Reinecke
2020-06-11 14:22 ` John Garry
2020-06-10 17:29 ` [PATCH RFC v7 07/12] blk-mq: Add support in hctx_tags_bitmap_show() for a " John Garry
2020-06-11 13:19 ` Hannes Reinecke
2020-06-11 14:33 ` John Garry
2020-06-12 6:06 ` Hannes Reinecke
2020-06-29 15:32 ` About sbitmap_bitmap_show() and cleared bits (was Re: [PATCH RFC v7 07/12] blk-mq: Add support in hctx_tags_bitmap_show() for a shared sbitmap) John Garry
2020-06-30 6:33 ` Hannes Reinecke
2020-06-30 7:30 ` John Garry
2020-06-30 11:36 ` John Garry
2020-06-30 14:55 ` Bart Van Assche
2020-07-13 9:41 ` [PATCH RFC v7 07/12] blk-mq: Add support in hctx_tags_bitmap_show() for a shared sbitmap John Garry
2020-07-13 12:20 ` Hannes Reinecke
2020-06-10 17:29 ` [PATCH RFC v7 08/12] scsi: Add template flag 'host_tagset' John Garry
2020-06-10 17:29 ` [PATCH RFC v7 09/12] scsi: hisi_sas: Switch v3 hw to MQ John Garry
2020-06-10 17:29 ` [PATCH RFC v7 10/12] megaraid_sas: switch fusion adapters " John Garry
2020-07-02 10:23 ` Kashyap Desai
2020-07-06 8:23 ` John Garry
2020-07-06 8:45 ` Hannes Reinecke
2020-07-06 9:26 ` John Garry
2020-07-06 9:40 ` Hannes Reinecke
2020-07-06 19:19 ` Kashyap Desai
2020-07-07 7:58 ` John Garry
2020-07-07 14:45 ` Kashyap Desai
2020-07-07 16:17 ` John Garry
2020-07-09 19:01 ` Kashyap Desai
2020-07-10 8:10 ` John Garry
2020-07-13 7:55 ` Kashyap Desai
2020-07-13 8:42 ` John Garry
2020-07-19 19:07 ` Kashyap Desai
2020-07-20 7:23 ` Kashyap Desai
2020-07-20 9:18 ` John Garry
2020-07-21 1:13 ` Ming Lei
2020-07-21 6:53 ` Kashyap Desai
2020-07-22 4:12 ` Ming Lei
2020-07-22 5:30 ` Kashyap Desai
2020-07-22 8:04 ` Ming Lei
2020-07-22 9:32 ` John Garry
2020-07-23 14:07 ` Ming Lei
2020-07-23 17:29 ` John Garry
2020-07-24 2:47 ` Ming Lei
2020-07-28 7:54 ` John Garry
2020-07-28 8:45 ` Ming Lei
2020-07-29 5:25 ` Kashyap Desai
2020-07-29 15:36 ` Ming Lei
2020-07-29 18:31 ` Kashyap Desai
2020-08-04 8:36 ` Ming Lei
2020-08-04 9:27 ` Kashyap Desai
2020-08-05 8:40 ` Ming Lei
2020-08-06 10:25 ` Kashyap Desai
2020-08-06 13:38 ` Ming Lei
2020-08-06 14:37 ` Kashyap Desai
2020-08-06 15:29 ` Ming Lei
2020-08-08 19:05 ` Kashyap Desai
2020-08-09 2:16 ` Ming Lei
2020-08-10 16:38 ` Kashyap Desai
2020-08-11 8:09 ` John Garry
2020-08-04 17:00 ` John Garry
2020-08-05 2:56 ` Ming Lei
2020-07-28 8:01 ` Kashyap Desai
2020-07-08 11:31 ` John Garry
2020-06-10 17:29 ` [PATCH RFC v7 11/12] smartpqi: enable host tagset John Garry
2020-07-14 13:16 ` John Garry
2020-07-14 13:31 ` John Garry
2020-07-14 18:16 ` Don.Brace
2020-07-15 7:28 ` John Garry
2020-07-14 14:02 ` Hannes Reinecke [this message]
2020-08-18 8:33 ` John Garry
2020-06-10 17:29 ` [PATCH RFC v7 12/12] hpsa: enable host_tagset and switch to MQ John Garry
2020-07-14 7:37 ` John Garry
2020-07-14 7:41 ` Hannes Reinecke
2020-07-14 7:52 ` John Garry
2020-07-14 8:06 ` Ming Lei
2020-07-14 9:53 ` John Garry
2020-07-14 10:14 ` Ming Lei
2020-07-14 10:43 ` Hannes Reinecke
2020-07-14 10:19 ` Hannes Reinecke
2020-07-14 10:35 ` John Garry
2020-07-14 10:44 ` Ming Lei
2020-07-14 10:52 ` John Garry
2020-07-14 12:04 ` Ming Lei
2020-08-03 20:39 ` Don.Brace
2020-08-04 9:27 ` John Garry
2020-08-04 15:18 ` Don.Brace
2020-08-05 11:21 ` John Garry
2020-08-14 21:04 ` Don.Brace
2020-08-17 8:00 ` John Garry
2020-08-17 18:39 ` Don.Brace
2020-08-18 7:14 ` Hannes Reinecke
2020-07-16 16:14 ` Don.Brace
2020-07-16 19:45 ` Don.Brace
2020-07-17 10:11 ` John Garry
2020-06-11 3:07 ` [PATCH RFC v7 00/12] blk-mq/scsi: Provide hostwide shared tags for SCSI HBAs Ming Lei
2020-06-11 9:35 ` John Garry
2020-06-12 18:47 ` Kashyap Desai
2020-06-15 2:13 ` Ming Lei
2020-06-15 6:57 ` Kashyap Desai
2020-06-16 1:00 ` Ming Lei
2020-06-17 11:26 ` Kashyap Desai
2020-06-22 6:24 ` Hannes Reinecke
2020-06-23 0:55 ` Ming Lei
2020-06-23 11:50 ` Kashyap Desai
2020-06-23 12:11 ` Kashyap Desai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=f4425d8b-d132-c5c7-c854-2be948795bda@suse.de \
--to=hare@suse.de \
--cc=axboe@kernel.dk \
--cc=bvanassche@acm.org \
--cc=chenxiang66@hisilicon.com \
--cc=don.brace@microsemi.com \
--cc=esc.storagedev@microsemi.com \
--cc=hare@suse.com \
--cc=hch@lst.de \
--cc=jejb@linux.ibm.com \
--cc=john.garry@huawei.com \
--cc=kashyap.desai@broadcom.com \
--cc=linux-block@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=martin.petersen@oracle.com \
--cc=megaraidlinux.pdl@broadcom.com \
--cc=ming.lei@redhat.com \
--cc=shivasharan.srikanteshwara@broadcom.com \
--cc=sumit.saxena@broadcom.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).