linux-serial.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Akash Asthana <akashast@codeaurora.org>
To: gregkh@linuxfoundation.org, agross@kernel.org,
	bjorn.andersson@linaro.org, wsa@the-dreams.de,
	broonie@kernel.org, mark.rutland@arm.com, robh+dt@kernel.org,
	georgi.djakov@linaro.org
Cc: linux-i2c@vger.kernel.org, linux-spi@vger.kernel.org,
	devicetree@vger.kernel.org, swboyd@chromium.org,
	mgautam@codeaurora.org, linux-arm-msm@vger.kernel.org,
	linux-serial@vger.kernel.org, mka@chromium.org,
	dianders@chromium.org, evgreen@chromium.org,
	Akash Asthana <akashast@codeaurora.org>
Subject: [PATCH V4 9/9] arm64: dts: sc7180: Add interconnect for QUP and QSPI
Date: Wed, 15 Apr 2020 15:53:18 +0530	[thread overview]
Message-ID: <1586946198-13912-10-git-send-email-akashast@codeaurora.org> (raw)
In-Reply-To: <1586946198-13912-1-git-send-email-akashast@codeaurora.org>

Add interconnect ports for GENI QUPs and QSPI to set bus capabilities.

Signed-off-by: Akash Asthana <akashast@codeaurora.org>
---
Changes in V2:
 - As per Bjorn's comment, ignoring 80 char limit in defining interconnects
   paths.

Changes in V3:
 - No change.

Change in V4:
 - No change.

 arch/arm64/boot/dts/qcom/sc7180.dtsi | 127 +++++++++++++++++++++++++++++++++++
 1 file changed, 127 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index ea1cb14..1096cb36 100644
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -506,6 +506,8 @@
 			#size-cells = <2>;
 			ranges;
 			iommus = <&apps_smmu 0x43 0x0>;
+			interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>;
+			interconnect-names = "qup-core";
 			status = "disabled";
 
 			i2c0: i2c@880000 {
@@ -518,6 +520,11 @@
 				interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
+						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>,
+						<&aggre1_noc MASTER_QUP_0 &mc_virt SLAVE_EBI1>;
+				interconnect-names = "qup-core", "qup-config",
+							"qup-memory";
 				status = "disabled";
 			};
 
@@ -531,6 +538,9 @@
 				interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
+						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>;
+				interconnect-names = "qup-core", "qup-config";
 				status = "disabled";
 			};
 
@@ -542,6 +552,9 @@
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_uart0_default>;
 				interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
+						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>;
+				interconnect-names = "qup-core", "qup-config";
 				status = "disabled";
 			};
 
@@ -555,6 +568,11 @@
 				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
+						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>,
+						<&aggre1_noc MASTER_QUP_0 &mc_virt SLAVE_EBI1>;
+				interconnect-names = "qup-core", "qup-config",
+							"qup-memory";
 				status = "disabled";
 			};
 
@@ -568,6 +586,9 @@
 				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
+						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>;
+				interconnect-names = "qup-core", "qup-config";
 				status = "disabled";
 			};
 
@@ -579,6 +600,9 @@
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_uart1_default>;
 				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
+						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>;
+				interconnect-names = "qup-core", "qup-config";
 				status = "disabled";
 			};
 
@@ -592,6 +616,11 @@
 				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
+						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>,
+						<&aggre1_noc MASTER_QUP_0 &mc_virt SLAVE_EBI1>;
+				interconnect-names = "qup-core", "qup-config",
+							"qup-memory";
 				status = "disabled";
 			};
 
@@ -603,6 +632,9 @@
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_uart2_default>;
 				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
+						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>;
+				interconnect-names = "qup-core", "qup-config";
 				status = "disabled";
 			};
 
@@ -616,6 +648,11 @@
 				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
+						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>,
+						<&aggre1_noc MASTER_QUP_0 &mc_virt SLAVE_EBI1>;
+				interconnect-names = "qup-core", "qup-config",
+							"qup-memory";
 				status = "disabled";
 			};
 
@@ -629,6 +666,9 @@
 				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
+						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>;
+				interconnect-names = "qup-core", "qup-config";
 				status = "disabled";
 			};
 
@@ -640,6 +680,9 @@
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_uart3_default>;
 				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
+						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>;
+				interconnect-names = "qup-core", "qup-config";
 				status = "disabled";
 			};
 
@@ -653,6 +696,11 @@
 				interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
+						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>,
+						<&aggre1_noc MASTER_QUP_0 &mc_virt SLAVE_EBI1>;
+				interconnect-names = "qup-core", "qup-config",
+							"qup-memory";
 				status = "disabled";
 			};
 
@@ -664,6 +712,9 @@
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_uart4_default>;
 				interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
+						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>;
+				interconnect-names = "qup-core", "qup-config";
 				status = "disabled";
 			};
 
@@ -677,6 +728,11 @@
 				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
+						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>,
+						<&aggre1_noc MASTER_QUP_0 &mc_virt SLAVE_EBI1>;
+				interconnect-names = "qup-core", "qup-config",
+							"qup-memory";
 				status = "disabled";
 			};
 
@@ -690,6 +746,9 @@
 				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
+						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>;
+				interconnect-names = "qup-core", "qup-config";
 				status = "disabled";
 			};
 
@@ -701,6 +760,9 @@
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_uart5_default>;
 				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
+						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>;
+				interconnect-names = "qup-core", "qup-config";
 				status = "disabled";
 			};
 		};
@@ -715,6 +777,8 @@
 			#size-cells = <2>;
 			ranges;
 			iommus = <&apps_smmu 0x4c3 0x0>;
+			interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>;
+			interconnect-names = "qup-core";
 			status = "disabled";
 
 			i2c6: i2c@a80000 {
@@ -727,6 +791,11 @@
 				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
+						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>,
+						<&aggre2_noc MASTER_QUP_1 &mc_virt SLAVE_EBI1>;
+				interconnect-names = "qup-core", "qup-config",
+							"qup-memory";
 				status = "disabled";
 			};
 
@@ -740,6 +809,9 @@
 				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
+						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>;
+				interconnect-names = "qup-core", "qup-config";
 				status = "disabled";
 			};
 
@@ -751,6 +823,9 @@
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_uart6_default>;
 				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
+						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>;
+				interconnect-names = "qup-core", "qup-config";
 				status = "disabled";
 			};
 
@@ -764,6 +839,11 @@
 				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
+						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>,
+						<&aggre2_noc MASTER_QUP_1 &mc_virt SLAVE_EBI1>;
+				interconnect-names = "qup-core", "qup-config",
+							"qup-memory";
 				status = "disabled";
 			};
 
@@ -775,6 +855,9 @@
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_uart7_default>;
 				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
+						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>;
+				interconnect-names = "qup-core", "qup-config";
 				status = "disabled";
 			};
 
@@ -788,6 +871,11 @@
 				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
+						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>,
+						<&aggre2_noc MASTER_QUP_1 &mc_virt SLAVE_EBI1>;
+				interconnect-names = "qup-core", "qup-config",
+							"qup-memory";
 				status = "disabled";
 			};
 
@@ -801,6 +889,9 @@
 				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
+						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>;
+				interconnect-names = "qup-core", "qup-config";
 				status = "disabled";
 			};
 
@@ -812,6 +903,9 @@
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_uart8_default>;
 				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
+						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>;
+				interconnect-names = "qup-core", "qup-config";
 				status = "disabled";
 			};
 
@@ -825,6 +919,11 @@
 				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
+						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>,
+						<&aggre2_noc MASTER_QUP_1 &mc_virt SLAVE_EBI1>;
+				interconnect-names = "qup-core", "qup-config",
+							"qup-memory";
 				status = "disabled";
 			};
 
@@ -836,6 +935,9 @@
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_uart9_default>;
 				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
+						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>;
+				interconnect-names = "qup-core", "qup-config";
 				status = "disabled";
 			};
 
@@ -849,6 +951,11 @@
 				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
+						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>,
+						<&aggre2_noc MASTER_QUP_1 &mc_virt SLAVE_EBI1>;
+				interconnect-names = "qup-core", "qup-config",
+							"qup-memory";
 				status = "disabled";
 			};
 
@@ -862,6 +969,9 @@
 				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
+						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>;
+				interconnect-names = "qup-core", "qup-config";
 				status = "disabled";
 			};
 
@@ -873,6 +983,9 @@
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_uart10_default>;
 				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
+						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>;
+				interconnect-names = "qup-core", "qup-config";
 				status = "disabled";
 			};
 
@@ -886,6 +999,11 @@
 				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
+						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>,
+						<&aggre2_noc MASTER_QUP_1 &mc_virt SLAVE_EBI1>;
+				interconnect-names = "qup-core", "qup-config",
+							"qup-memory";
 				status = "disabled";
 			};
 
@@ -899,6 +1017,9 @@
 				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
+						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>;
+				interconnect-names = "qup-core", "qup-config";
 				status = "disabled";
 			};
 
@@ -910,6 +1031,9 @@
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_uart11_default>;
 				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
+						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>;
+				interconnect-names = "qup-core", "qup-config";
 				status = "disabled";
 			};
 		};
@@ -1414,6 +1538,9 @@
 			clocks = <&gcc GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
 				 <&gcc GCC_QSPI_CORE_CLK>;
 			clock-names = "iface", "core";
+			interconnects = <&gem_noc MASTER_APPSS_PROC
+					&config_noc SLAVE_QSPI_0>;
+			interconnect-names = "qspi-config";
 			status = "disabled";
 		};
 
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,\na Linux Foundation Collaborative Project

      parent reply	other threads:[~2020-04-15 10:32 UTC|newest]

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-04-15 10:23 [PATCH V4 0/9] Add interconnect support to QSPI and QUP drivers Akash Asthana
2020-04-15 10:23 ` [PATCH V4 1/9] interconnect: Add devm_of_icc_get() as exported API for users Akash Asthana
2020-04-28 16:04   ` Georgi Djakov
2020-04-15 10:23 ` [PATCH V4 2/9] interconnect: Set peak requirement as twice of average Akash Asthana
2020-04-23  9:31   ` Georgi Djakov
2020-04-28  9:46     ` Akash Asthana
2020-04-28 10:53       ` Georgi Djakov
2020-04-15 10:23 ` [PATCH V4 3/9] soc: qcom: geni: Support for ICC voting Akash Asthana
2020-04-15 23:36   ` Matthias Kaehlcke
2020-04-28  9:48     ` Akash Asthana
2020-04-15 10:23 ` [PATCH V4 4/9] soc: qcom-geni-se: Add interconnect support to fix earlycon crash Akash Asthana
2020-04-16  0:31   ` Matthias Kaehlcke
2020-04-28 10:21     ` Akash Asthana
2020-04-28 15:48       ` Matthias Kaehlcke
2020-04-15 10:23 ` [PATCH V4 5/9] i2c: i2c-qcom-geni: Add interconnect support Akash Asthana
2020-04-16 17:09   ` Matthias Kaehlcke
2020-04-15 10:23 ` [PATCH V4 6/9] spi: spi-geni-qcom: " Akash Asthana
2020-04-15 11:39   ` Mark Brown
2020-04-15 10:23 ` [PATCH V4 7/9] tty: serial: qcom_geni_serial: " Akash Asthana
2020-04-16 17:17   ` Matthias Kaehlcke
2020-04-15 10:23 ` [PATCH V4 8/9] spi: spi-qcom-qspi: " Akash Asthana
2020-04-15 10:23 ` Akash Asthana [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1586946198-13912-10-git-send-email-akashast@codeaurora.org \
    --to=akashast@codeaurora.org \
    --cc=agross@kernel.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=broonie@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=dianders@chromium.org \
    --cc=evgreen@chromium.org \
    --cc=georgi.djakov@linaro.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-i2c@vger.kernel.org \
    --cc=linux-serial@vger.kernel.org \
    --cc=linux-spi@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=mgautam@codeaurora.org \
    --cc=mka@chromium.org \
    --cc=robh+dt@kernel.org \
    --cc=swboyd@chromium.org \
    --cc=wsa@the-dreams.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).