Re: [PATCH v38 21/24] x86/vdso: Implement a vDSO for Intel SGX enclave call

[Borislav Petkov <bp@alien8.de>]

On Tue, Sep 15, 2020 at 02:28:39PM +0300, Jarkko Sakkinen wrote:
> diff --git a/arch/x86/entry/vdso/vsgx_enter_enclave.S b/arch/x86/entry/vdso/vsgx_enter_enclave.S
> new file mode 100644
> index 000000000000..adbd59d41517
> --- /dev/null
> +++ b/arch/x86/entry/vdso/vsgx_enter_enclave.S

Why not simply

arch/x86/entry/vdso/sgx.S

?

> @@ -0,0 +1,157 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +
> +#include <linux/linkage.h>
> +#include <asm/export.h>
> +#include <asm/errno.h>
> +#include <asm/enclu.h>
> +
> +#include "extable.h"
> +
> +/* Offset of 'struct sgx_enclave_run' relative to %rbp. */
> +#define SGX_ENCLAVE_RUN_PTR	2*8
> +
> +/* Offsets into 'struct sgx_enclave_run'. */
> +#define SGX_ENCLAVE_RUN_TSC		0*8
> +#define SGX_ENCLAVE_RUN_FLAGS		1*8
> +#define SGX_ENCLAVE_RUN_EXIT_REASON	1*8 + 4
> +#define SGX_ENCLAVE_RUN_USER_HANDLER	2*8
> +/* #define SGX_ENCLAVE_RUN_USER_DATA	3*8 */

What's with that guy? Left here as documentation showing what's at 3*8
offset?

> +#define SGX_ENCLAVE_RUN_EXCEPTION	4*8
> +
> +#define SGX_SYNCHRONOUS_EXIT		0
> +#define SGX_EXCEPTION_EXIT		1

Those are in ...uapi/asm/sgx.h too. Unify?

> +
> +/* Offsets into sgx_enter_enclave.exception. */
> +#define SGX_EX_LEAF			0*8
> +#define SGX_EX_TRAPNR			0*8+4
> +#define SGX_EX_ERROR_CODE		0*8+6
> +#define SGX_EX_ADDRESS			1*8
> +
> +.code64
> +.section .text, "ax"
> +
> +SYM_FUNC_START(__vdso_sgx_enter_enclave)
> +	/* Prolog */
> +	.cfi_startproc

Are the CFI annotations for userspace?

> +	push	%rbp
> +	.cfi_adjust_cfa_offset	8
> +	.cfi_rel_offset		%rbp, 0
> +	mov	%rsp, %rbp
> +	.cfi_def_cfa_register	%rbp
> +	push	%rbx
> +	.cfi_rel_offset		%rbx, -8
> +
> +	mov	%ecx, %eax
> +.Lenter_enclave:
> +	/* EENTER <= leaf <= ERESUME */
> +	cmp	$EENTER, %eax
> +	jb	.Linvalid_input
> +	cmp	$ERESUME, %eax
> +	ja	.Linvalid_input
> +
> +	mov	SGX_ENCLAVE_RUN_PTR(%rbp), %rcx
> +
> +	/* No flags are currently defined/supported. */
> +	cmpl	$0, SGX_ENCLAVE_RUN_FLAGS(%rcx)
> +	jne	.Linvalid_input
> +
> +	/* Load TCS and AEP */

		TSC

I can see why you would write "TCS" though - there's a thread control
structure thing too in that patch.

> +	mov	SGX_ENCLAVE_RUN_TSC(%rcx), %rbx
> +	lea	.Lasync_exit_pointer(%rip), %rcx
> +
> +	/* Single ENCLU serving as both EENTER and AEP (ERESUME) */
> +.Lasync_exit_pointer:
> +.Lenclu_eenter_eresume:
> +	enclu
> +
> +	/* EEXIT jumps here unless the enclave is doing something fancy. */
> +	mov	SGX_ENCLAVE_RUN_PTR(%rbp), %rbx
> +
> +	/* Set exit_reason. */
> +	movl	$SGX_SYNCHRONOUS_EXIT, SGX_ENCLAVE_RUN_EXIT_REASON(%rbx)
> +
> +	/* Invoke userspace's exit handler if one was provided. */
> +.Lhandle_exit:
> +	cmpq	$0, SGX_ENCLAVE_RUN_USER_HANDLER(%rbx)
> +	jne	.Linvoke_userspace_handler
> +
> +	/* Success, in the sense that ENCLU was attempted. */
> +	xor	%eax, %eax
> +
> +.Lout:
> +	pop	%rbx
> +	leave
> +	.cfi_def_cfa		%rsp, 8
> +	ret
> +
> +	/* The out-of-line code runs with the pre-leave stack frame. */
> +	.cfi_def_cfa		%rbp, 16
> +
> +.Linvalid_input:
> +	mov	$(-EINVAL), %eax
> +	jmp	.Lout
> +
> +.Lhandle_exception:
> +	mov	SGX_ENCLAVE_RUN_PTR(%rbp), %rbx
> +
> +	/* Set the exit_reason and exception info. */
> +	movl	$SGX_EXCEPTION_EXIT, SGX_ENCLAVE_RUN_EXIT_REASON(%rbx)
> +
> +	mov	%eax, (SGX_ENCLAVE_RUN_EXCEPTION + SGX_EX_LEAF)(%rbx)
> +	mov	%di,  (SGX_ENCLAVE_RUN_EXCEPTION + SGX_EX_TRAPNR)(%rbx)
> +	mov	%si,  (SGX_ENCLAVE_RUN_EXCEPTION + SGX_EX_ERROR_CODE)(%rbx)
> +	mov	%rdx, (SGX_ENCLAVE_RUN_EXCEPTION + SGX_EX_ADDRESS)(%rbx)
> +	jmp	.Lhandle_exit
> +
> +.Linvoke_userspace_handler:
> +	/* Pass the untrusted RSP (at exit) to the callback via %rcx. */
> +	mov	%rsp, %rcx
> +
> +	/* Save @e, %rbx is about to be clobbered. */

I've been wondering what that "@e" thing is and I believe I've found it at the
end: "... @e, the optional sgx_enclave_exception struct"

Yes?

Please rewrite what that "e" is here - I think you wanna say "struct
sgx_enclave_run.exception" instead to clarify.

...

> diff --git a/arch/x86/include/asm/enclu.h b/arch/x86/include/asm/enclu.h
> new file mode 100644
> index 000000000000..06157b3e9ede
> --- /dev/null
> +++ b/arch/x86/include/asm/enclu.h
> @@ -0,0 +1,8 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +#ifndef _ASM_X86_ENCLU_H
> +#define _ASM_X86_ENCLU_H
> +
> +#define EENTER	0x02
> +#define ERESUME	0x03
> +
> +#endif /* _ASM_X86_ENCLU_H */
> diff --git a/arch/x86/include/uapi/asm/sgx.h b/arch/x86/include/uapi/asm/sgx.h
> index d0916fb9629e..1564d7f88597 100644
> --- a/arch/x86/include/uapi/asm/sgx.h
> +++ b/arch/x86/include/uapi/asm/sgx.h

Are all those defines being added to the uapi header, also actually
needed by userspace?

> @@ -72,4 +72,132 @@ struct sgx_enclave_provision {
>  	__u64 attribute_fd;
>  };
>  
> +#define SGX_SYNCHRONOUS_EXIT	0
> +#define SGX_EXCEPTION_EXIT	1
> +
> +struct sgx_enclave_run;
> +
> +/**
> + * typedef sgx_enclave_exit_handler_t - Exit handler function accepted by
> + *					__vdso_sgx_enter_enclave()
> + *
> + * @rdi:	RDI at the time of enclave exit
> + * @rsi:	RSI at the time of enclave exit
> + * @rdx:	RDX at the time of enclave exit
> + * @ursp:	RSP at the time of enclave exit (untrusted stack)
> + * @r8:		R8 at the time of enclave exit
> + * @r9:		R9 at the time of enclave exit

I'm sure you can avoid that "at the time of enclave exit" repetition.

...

> +/**
> + * typedef vdso_sgx_enter_enclave_t - Prototype for __vdso_sgx_enter_enclave(),
> + *				      a vDSO function to enter an SGX enclave.
> + *
> + * @rdi:	Pass-through value for RDI
> + * @rsi:	Pass-through value for RSI
> + * @rdx:	Pass-through value for RDX
> + * @leaf:	ENCLU leaf, must be EENTER or ERESUME
> + * @r8:		Pass-through value for R8
> + * @r9:		Pass-through value for R9
> + * @r:		struct sgx_enclave_run, must be non-NULL
> + *
> + * NOTE: __vdso_sgx_enter_enclave() does not ensure full compliance with the
> + * x86-64 ABI, e.g. doesn't handle XSAVE state.  Except for non-volatile
> + * general purpose registers, EFLAGS.DF, and RSP alignment, preserving/setting
> + * state in accordance with the x86-64 ABI is the responsibility of the enclave
> + * and its runtime, i.e. __vdso_sgx_enter_enclave() cannot be called from C
> + * code without careful consideration by both the enclave and its runtime.
> + *
> + * All general purpose registers except RAX, RBX and RCX are passed as-is to
> + * the enclave.  RAX, RBX and RCX are consumed by EENTER and ERESUME and are
> + * loaded with @leaf, asynchronous exit pointer, and @tcs respectively.

That tcs is probably struct sgx_enclave_run.tcs?

> + * RBP and the stack are used to anchor __vdso_sgx_enter_enclave() to the
> + * pre-enclave state, e.g. to retrieve @e and @handler after an enclave exit.

Expand @e and do you mean "@user_handler" with "@handler"?

> + * All other registers are available for use by the enclave and its runtime,
> + * e.g. an enclave can push additional data onto the stack (and modify RSP) to
> + * pass information to the optional exit handler (see below).
> + *
> + * Most exceptions reported on ENCLU, including those that occur within the
> + * enclave, are fixed up and reported synchronously instead of being delivered
> + * via a standard signal. Debug Exceptions (#DB) and Breakpoints (#BP) are
> + * never fixed up and are always delivered via standard signals. On synchrously
> + * reported exceptions, -EFAULT is returned and details about the exception are
> + * recorded in @e, the optional sgx_enclave_exception struct.
> + *
> + * If an exit handler is provided, the handler will be invoked on synchronous
> + * exits from the enclave and for all synchronously reported exceptions. In
> + * latter case, @e is filled prior to invoking the handler.
> + *
> + * The exit handler's return value is interpreted as follows:
> + *  >0:		continue, restart __vdso_sgx_enter_enclave() with @ret as @leaf
> + *   0:		success, return @ret to the caller
> + *  <0:		error, return @ret to the caller
> + *
> + * The exit handler may transfer control, e.g. via longjmp() or C++ exception,
> + * without returning to __vdso_sgx_enter_enclave().
> + *
> + * Return:
> + *  0 on success (ENCLU reached),
> + *  -EINVAL if ENCLU leaf is not allowed,
> + *  -errno for all other negative values returned by the userspace exit handler
> + */
> +typedef int (*vdso_sgx_enter_enclave_t)(unsigned long rdi, unsigned long rsi,
> +					unsigned long rdx, unsigned int leaf,
> +					unsigned long r8,  unsigned long r9,
> +					struct sgx_enclave_run *r);
> +
>  #endif /* _UAPI_ASM_X86_SGX_H */
> -- 
> 2.25.1
> 

-- 
Regards/Gruss,
    Boris.

https://people.kernel.org/tglx/notes-about-netiquette