From mboxrd@z Thu Jan 1 00:00:00 1970 From: Alok Chauhan Subject: [PATCH 1/6] dt-bindings: soc: qcom: Add interconnect binding for GENI QUP Date: Tue, 22 Jan 2019 12:03:31 +0530 Message-ID: <1548138816-1149-2-git-send-email-alokc@codeaurora.org> References: <1548138816-1149-1-git-send-email-alokc@codeaurora.org> Cc: georgi.djakov@linaro.org, dianders@chromium.org, swboyd@chromium.org, bjorn.andersson@linaro.org, Alok Chauhan To: linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-i2c@vger.kernel.org, linux-spi@vger.kernel.org, linux-serial@vger.kernel.org, Andy Gross , David Brown , Rob Herring , Mark Rutland Return-path: In-Reply-To: <1548138816-1149-1-git-send-email-alokc@codeaurora.org> Sender: linux-kernel-owner@vger.kernel.org List-Id: linux-spi.vger.kernel.org Add documentation for the interconnect and interconnect-names bindings for the GENI QUP as detailed by bindings/interconnect/interconnect.txt. Signed-off-by: Alok Chauhan --- Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.txt | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.txt index dab7ca9..44d7e02 100644 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.txt +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.txt @@ -17,6 +17,12 @@ Required properties if child node exists: - #address-cells: Must be <1> for Serial Engine Address - #size-cells: Must be <1> for Serial Engine Address Size - ranges: Must be present +- interconnects: phandle to a interconnect provider. Please refer + ../interconnect/interconnect.txt for details. + Must be 2 paths corresponding to 2 AXI ports. +- interconnect-names: Port names to differentiate between the + 2 interconnect paths defined with interconnect + specifier. Properties for children: @@ -67,6 +73,10 @@ Example: #size-cells = <1>; ranges; + interconnects = <&qnoc 11 &qnoc 512>, + <&qnoc 0 &qnoc 543>; + interconnect-names = "qup-memory", "qup-config"; + i2c0: i2c@a94000 { compatible = "qcom,geni-i2c"; reg = <0xa94000 0x4000>; -- The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project