From: Anton Vorontsov <avorontsov@ru.mvista.com>
To: Kumar Gala <galak@kernel.crashing.org>,
David Brownell <dbrownell@users.sourceforge.net>
Cc: linuxppc-dev@ozlabs.org, spi-devel-general@lists.sourceforge.net
Subject: [PATCH 0/7] OpenFirmware support for the spi_mpc83xx driver
Date: Fri, 5 Dec 2008 23:09:36 +0300 [thread overview]
Message-ID: <20081205200936.GA19137@oksana.dev.rtsoft.ru> (raw)
Hi all,
The patch series are used to support SPI via the OF SPI subsystem
(driver/of/of_spi.c). Now the driver is able to manage its own
chip selects, and doesn't need any auxiliary support from the
board files or fsl_soc constructors.
The series also contains PowerPC portions of the MMC SPI support.
Since the series touches spi and powerpc trees, I think it would
be most convenient to pass it via one of these trees. The patches
doesn't touch any SPI functionality, only some probe routines, so
I believe powerpc.git is the best candidate...
The other reason for powerpc tree is that the patches depends on
other patches as found in paulus/powerpc.git + of_gpio_count()
as found here:
http://ozlabs.org/pipermail/linuxppc-dev/2008-December/065917.html
David, if you're OK with the patches, may I ask you to sign off on
the ones that touch drivers/spi so that we could pass it via Kumar's
powerpc.git?
The queue:
[1/7] powerpc: Implement get_brgfreq() and get_baudrate() stubs
[2/7] spi_mpc83xx: Fix sparse warnings
[3/7] spi_mpc83xx: Rework chip selects handling
[4/7] spi_mpc83xx: Add OF platform driver bindings
[5/7] powerpc/fsl_soc: Isolate legacy fsl_spi support to mpc832x_rdb boards
[6/7] powerpc: Add mmc-spi-slot bindings
[7/7] powerpc/83xx: Add mmc-spi support via the device tree for MPC8323E-RDB
Thanks,
--
Anton Vorontsov
email: cbouatmailru@gmail.com
irc://irc.freenode.net/bd2
next reply other threads:[~2008-12-05 20:09 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-12-05 20:09 Anton Vorontsov [this message]
[not found] ` <20081205200936.GA19137-wnGakbxT3iijyJ0x5qLZdcN33GVbZNy3@public.gmane.org>
2008-12-05 20:10 ` [PATCH 1/7] powerpc: Implement get_brgfreq() and get_baudrate() stubs Anton Vorontsov
2008-12-16 18:24 ` Kumar Gala
2008-12-05 20:10 ` [PATCH 2/7] spi_mpc83xx: Fix sparse warnings Anton Vorontsov
2008-12-05 20:10 ` [PATCH 3/7] spi_mpc83xx: Rework chip selects handling Anton Vorontsov
2008-12-05 20:10 ` [PATCH 4/7] spi_mpc83xx: Add OF platform driver bindings Anton Vorontsov
2008-12-05 20:10 ` [PATCH 5/7] powerpc/fsl_soc: Isolate legacy fsl_spi support to mpc832x_rdb boards Anton Vorontsov
2008-12-05 20:10 ` [PATCH 6/7] powerpc: Add mmc-spi-slot bindings Anton Vorontsov
2008-12-05 20:10 ` [PATCH 7/7] powerpc/83xx: Add mmc-spi support via the device tree for MPC8323E-RDB Anton Vorontsov
2008-12-18 18:33 ` [PATCH 0/7] OpenFirmware support for the spi_mpc83xx driver Anton Vorontsov
2009-01-07 4:28 ` Kumar Gala
[not found] ` <6DC0606C-1CDA-4549-8A63-E3F86010291B-XVmvHMARGAS8U2dJNN8I7kB+6BGkLq7r@public.gmane.org>
2009-01-23 19:49 ` [PATCH resend 0/6] " Anton Vorontsov
[not found] ` <20090123194958.GA17355-wnGakbxT3iijyJ0x5qLZdcN33GVbZNy3@public.gmane.org>
2009-01-23 19:50 ` [PATCH 1/6] spi_mpc83xx: Fix sparse warnings Anton Vorontsov
2009-01-23 19:50 ` [PATCH 2/6] spi_mpc83xx: Rework chip selects handling Anton Vorontsov
2009-01-23 19:50 ` [PATCH 3/6] spi_mpc83xx: Add OF platform driver bindings Anton Vorontsov
2009-01-23 19:50 ` [PATCH 4/6] powerpc: Add mmc-spi-slot bindings Anton Vorontsov
2009-01-23 19:50 ` [PATCH 5/6] powerpc/83xx: Add mmc-spi support via the device tree for MPC8323E-RDB Anton Vorontsov
2009-01-23 19:50 ` [PATCH 6/6] powerpc/fsl_soc: Isolate legacy fsl_spi support to mpc832x_rdb boards Anton Vorontsov
2009-03-09 16:53 ` [PATCH resend 0/6] OpenFirmware support for the spi_mpc83xx driver Kumar Gala
[not found] ` <20090318200048.GD8182@oksana.dev.rtsoft.ru>
2009-04-08 9:18 ` [PATCH 6/6] powerpc/fsl_soc: Isolate legacy fsl_spi support to mpc832x_rdb boards Peter Korsgaard
2009-04-17 5:13 ` Peter Korsgaard
2009-04-17 12:23 ` Anton Vorontsov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20081205200936.GA19137@oksana.dev.rtsoft.ru \
--to=avorontsov@ru.mvista.com \
--cc=dbrownell@users.sourceforge.net \
--cc=galak@kernel.crashing.org \
--cc=linuxppc-dev@ozlabs.org \
--cc=spi-devel-general@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).