On Fri, Jun 02, 2023 at 04:49:23PM +0800, William Qiu wrote:
> The QSPI controller needs three clock items to work properly on StarFive
> JH7110 SoC, so there is need to change the maxItems's value to 3. Other
> platforms do not have this constraint.
> 
> Signed-off-by: William Qiu <william.qiu@starfivetech.com>
> Reviewed-by: Hal Feng <hal.feng@starfivetech.com>
> ---
>  .../devicetree/bindings/spi/cdns,qspi-nor.yaml    | 15 ++++++++++++---
>  1 file changed, 12 insertions(+), 3 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/spi/cdns,qspi-nor.yaml b/Documentation/devicetree/bindings/spi/cdns,qspi-nor.yaml
> index b310069762dd..b6a27171d965 100644
> --- a/Documentation/devicetree/bindings/spi/cdns,qspi-nor.yaml
> +++ b/Documentation/devicetree/bindings/spi/cdns,qspi-nor.yaml
> @@ -26,6 +26,15 @@ allOf:
>              const: starfive,jh7110-qspi
>      then:
>        properties:
> +        clocks:
> +          maxItems: 3
> +
> +        clock-names:
> +          items:
> +            - const: ref_clk

Aww, I liked Mark's suggestions better.
If you are respinning to fix the LKP reported issue w/ ignoring the result
of enabling the clocks, could you chop the _clk off of this one?

Otherwise,
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>

Thanks,
Conor.