[PATCH] spi: spl022: Probe defer is no error

From: "Mårten Lindahl" <marten.lindahl@axis.com>
To: Linus Walleij <linus.walleij@linaro.org>,
	Mark Brown <broonie@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org, linux-spi@vger.kernel.org,
	linux-kernel@vger.kernel.org, kernel@axis.com,
	"Mårten Lindahl" <marten.lindahl@axis.com>
Subject: [PATCH] spi: spl022: Probe defer is no error
Date: Fri, 2 Jun 2023 13:11:51 +0200	[thread overview]
Message-ID: <20230602-pl022-defer-fix-v1-1-b80bfca3e1b4@axis.com> (raw)

When the spi controller is registered and the cs_gpiods cannot be
assigned, causing a defer of the probe, there is an error print saying:
"probe - problem registering spi master"

This should not be announced as an error. Print this message for all
errors except for the probe defer.

Signed-off-by: Mårten Lindahl <marten.lindahl@axis.com>
---
 drivers/spi/spi-pl022.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/spi/spi-pl022.c b/drivers/spi/spi-pl022.c
index 982407bc5d9f..520471dfeb11 100644
--- a/drivers/spi/spi-pl022.c
+++ b/drivers/spi/spi-pl022.c
@@ -2217,8 +2217,9 @@ static int pl022_probe(struct amba_device *adev, const struct amba_id *id)
 	amba_set_drvdata(adev, pl022);
 	status = devm_spi_register_master(&adev->dev, master);
 	if (status != 0) {
-		dev_err(&adev->dev,
-			"probe - problem registering spi master\n");
+		if (status != -EPROBE_DEFER)
+			dev_err(&adev->dev,
+				"probe - problem registering spi master\n");
 		goto err_spi_register;
 	}
 	dev_dbg(dev, "probe succeeded\n");

---
base-commit: 7877cb91f1081754a1487c144d85dc0d2e2e7fc4
change-id: 20230602-pl022-defer-fix-0f8b8c0b6eff

Best regards,
-- 
Mårten Lindahl <marten.lindahl@axis.com>

