From: Phillip Potter <phil@philpotter.co.uk>
To: gregkh@linuxfoundation.org
Cc: Larry.Finger@lwfinger.net, dan.carpenter@oracle.com,
linux-kernel@vger.kernel.org, linux-staging@lists.linux.dev
Subject: [PATCH 05/28] staging: rtl8188eu: remove all DBG_88E calls from core/rtw_ap.c
Date: Tue, 15 Jun 2021 01:14:44 +0100 [thread overview]
Message-ID: <20210615001507.1171-6-phil@philpotter.co.uk> (raw)
In-Reply-To: <20210615001507.1171-1-phil@philpotter.co.uk>
Remove all DBG_88E calls from core/rtw_ap.c as this macro is
unnecessary, and many of these calls are dubious in terms of necessity.
Removing all calls will ultimately allow the removal of the macro
itself.
Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
---
drivers/staging/rtl8188eu/core/rtw_ap.c | 78 +------------------------
1 file changed, 2 insertions(+), 76 deletions(-)
diff --git a/drivers/staging/rtl8188eu/core/rtw_ap.c b/drivers/staging/rtl8188eu/core/rtw_ap.c
index 9399c17bfdbf..b817aa8b9de4 100644
--- a/drivers/staging/rtl8188eu/core/rtw_ap.c
+++ b/drivers/staging/rtl8188eu/core/rtw_ap.c
@@ -183,9 +183,6 @@ void expire_timeout_chk(struct adapter *padapter)
list_del_init(&psta->auth_list);
pstapriv->auth_list_cnt--;
- DBG_88E("auth expire %6ph\n",
- psta->hwaddr);
-
spin_unlock_bh(&pstapriv->auth_list_lock);
spin_lock_bh(&pstapriv->sta_hash_lock);
@@ -254,20 +251,13 @@ void expire_timeout_chk(struct adapter *padapter)
list_del_init(&psta->asoc_list);
pstapriv->asoc_list_cnt--;
- DBG_88E("asoc expire %pM, state = 0x%x\n",
- (psta->hwaddr), psta->state);
updated = ap_free_sta(padapter, psta, true,
WLAN_REASON_DEAUTH_LEAVING);
} else {
/* TODO: Aging mechanism to digest frames in sleep_q to avoid running out of xmitframe */
if (psta->sleepq_len > (NR_XMITFRAME / pstapriv->asoc_list_cnt) &&
- padapter->xmitpriv.free_xmitframe_cnt < (NR_XMITFRAME / pstapriv->asoc_list_cnt / 2)) {
- DBG_88E("%s sta:%pM, sleepq_len:%u, free_xmitframe_cnt:%u, asoc_list_cnt:%u, clear sleep_q\n", __func__,
- (psta->hwaddr), psta->sleepq_len,
- padapter->xmitpriv.free_xmitframe_cnt,
- pstapriv->asoc_list_cnt);
+ padapter->xmitpriv.free_xmitframe_cnt < (NR_XMITFRAME / pstapriv->asoc_list_cnt / 2))
wakeup_sta_to_xmit(padapter, psta);
- }
}
}
@@ -299,21 +289,16 @@ void expire_timeout_chk(struct adapter *padapter)
psta->keep_alive_trycnt++;
if (ret == _SUCCESS) {
- DBG_88E("asoc check, sta(%pM) is alive\n",
- (psta->hwaddr));
psta->expire_to = pstapriv->expire_to;
psta->keep_alive_trycnt = 0;
continue;
} else if (psta->keep_alive_trycnt <= 3) {
- DBG_88E("ack check for asoc expire, keep_alive_trycnt =%d\n", psta->keep_alive_trycnt);
psta->expire_to = 1;
continue;
}
psta->keep_alive_trycnt = 0;
- DBG_88E("asoc expire %pM, state = 0x%x\n",
- psta->hwaddr, psta->state);
spin_lock_bh(&pstapriv->asoc_list_lock);
list_del_init(&psta->asoc_list);
pstapriv->asoc_list_cnt--;
@@ -384,9 +369,6 @@ void add_RATid(struct adapter *padapter, struct sta_info *psta, u8 rssi_level)
tx_ra_bitmap |= ((raid << 28) & 0xf0000000);
- DBG_88E("%s => mac_id:%d , raid:%d , bitmap = 0x%x, arg = 0x%x\n",
- __func__, psta->mac_id, raid, tx_ra_bitmap, arg);
-
/* bitmap[0:27] = tx_rate_bitmap */
/* bitmap[28:31]= Rate Adaptive id */
/* arg[0:4] = macid */
@@ -400,8 +382,6 @@ void add_RATid(struct adapter *padapter, struct sta_info *psta, u8 rssi_level)
psta->raid = raid;
psta->init_rate = init_rate;
- } else {
- DBG_88E("station aid %d exceed the max number\n", psta->aid);
}
}
@@ -457,8 +437,6 @@ static void update_bmc_sta(struct adapter *padapter)
arg = psta->mac_id & 0x1f;
arg |= BIT(7);
tx_ra_bitmap |= ((raid << 28) & 0xf0000000);
- DBG_88E("%s, mask = 0x%x, arg = 0x%x\n", __func__,
- tx_ra_bitmap, arg);
/* bitmap[0:27] = tx_rate_bitmap */
/* bitmap[28:31]= Rate Adaptive id */
@@ -476,8 +454,6 @@ static void update_bmc_sta(struct adapter *padapter)
psta->state = _FW_LINKED;
spin_unlock_bh(&psta->lock);
- } else {
- DBG_88E("add_RATid_bmc_sta error!\n");
}
}
@@ -572,8 +548,6 @@ static void update_hw_ht_param(struct adapter *padapter)
/* Config SM Power Save setting */
pmlmeinfo->SM_PS = (le16_to_cpu(pmlmeinfo->HT_caps.cap_info) & 0x0C) >> 2;
- if (pmlmeinfo->SM_PS == WLAN_HT_CAP_SM_PS_STATIC)
- DBG_88E("%s(): WLAN_HT_CAP_SM_PS_STATIC\n", __func__);
}
static void start_bss_network(struct adapter *padapter, u8 *pbuf)
@@ -685,9 +659,6 @@ static void start_bss_network(struct adapter *padapter, u8 *pbuf)
*/
set_channel_bwmode(padapter, cur_channel, cur_ch_offset, cur_bwmode);
- DBG_88E("CH =%d, BW =%d, offset =%d\n", cur_channel, cur_bwmode,
- cur_ch_offset);
-
/* */
pmlmeext->cur_channel = cur_channel;
pmlmeext->cur_bwmode = cur_bwmode;
@@ -707,8 +678,7 @@ static void start_bss_network(struct adapter *padapter, u8 *pbuf)
update_beacon(padapter, WLAN_EID_TIM, NULL, false);
/* issue beacon frame */
- if (send_beacon(padapter) == _FAIL)
- DBG_88E("send_beacon, fail!\n");
+ send_beacon(padapter);
}
/* update bc/mc sta_info */
@@ -746,8 +716,6 @@ int rtw_check_beacon_data(struct adapter *padapter, u8 *pbuf, int len)
/* ht_capab, ht_oper */
/* WPS IE */
- DBG_88E("%s, len =%d\n", __func__, len);
-
if (!check_fwstate(pmlmepriv, WIFI_AP_STATE))
return _FAIL;
@@ -999,8 +967,6 @@ void rtw_set_macaddr_acl(struct adapter *padapter, int mode)
struct sta_priv *pstapriv = &padapter->stapriv;
struct wlan_acl_pool *pacl_list = &pstapriv->acl_list;
- DBG_88E("%s, mode =%d\n", __func__, mode);
-
pacl_list->mode = mode;
}
@@ -1014,8 +980,6 @@ int rtw_acl_add_sta(struct adapter *padapter, u8 *addr)
struct wlan_acl_pool *pacl_list = &pstapriv->acl_list;
struct __queue *pacl_node_q = &pacl_list->acl_node_q;
- DBG_88E("%s(acl_num =%d) =%pM\n", __func__, pacl_list->num, (addr));
-
if ((NUM_ACL - 1) < pacl_list->num)
return -1;
@@ -1028,7 +992,6 @@ int rtw_acl_add_sta(struct adapter *padapter, u8 *addr)
if (!memcmp(paclnode->addr, addr, ETH_ALEN)) {
if (paclnode->valid) {
added = true;
- DBG_88E("%s, sta has been added\n", __func__);
break;
}
}
@@ -1059,8 +1022,6 @@ int rtw_acl_add_sta(struct adapter *padapter, u8 *addr)
}
}
- DBG_88E("%s, acl_num =%d\n", __func__, pacl_list->num);
-
spin_unlock_bh(&pacl_node_q->lock);
return ret;
@@ -1074,8 +1035,6 @@ int rtw_acl_remove_sta(struct adapter *padapter, u8 *addr)
struct wlan_acl_pool *pacl_list = &pstapriv->acl_list;
struct __queue *pacl_node_q = &pacl_list->acl_node_q;
- DBG_88E("%s(acl_num =%d) =%pM\n", __func__, pacl_list->num, (addr));
-
spin_lock_bh(&pacl_node_q->lock);
phead = get_list_head(pacl_node_q);
@@ -1093,7 +1052,6 @@ int rtw_acl_remove_sta(struct adapter *padapter, u8 *addr)
spin_unlock_bh(&pacl_node_q->lock);
- DBG_88E("%s, acl_num =%d\n", __func__, pacl_list->num);
return 0;
}
@@ -1106,8 +1064,6 @@ static void update_bcn_erpinfo_ie(struct adapter *padapter)
unsigned char *p, *ie = pnetwork->ies;
u32 len = 0;
- DBG_88E("%s, ERP_enable =%d\n", __func__, pmlmeinfo->ERP_enable);
-
if (!pmlmeinfo->ERP_enable)
return;
@@ -1187,8 +1143,6 @@ static void update_bcn_vendor_spec_ie(struct adapter *padapter, u8 *oui)
if (!memcmp(WPS_OUI, oui, 4))
update_bcn_wps_ie(padapter);
- else
- DBG_88E("unknown OUI type!\n");
}
void update_beacon(struct adapter *padapter, u8 ie_id, u8 *oui, u8 tx)
@@ -1251,9 +1205,6 @@ static int rtw_ht_operation_update(struct adapter *padapter)
if (pmlmepriv->htpriv.ht_option)
return 0;
- DBG_88E("%s current operation mode = 0x%X\n",
- __func__, pmlmepriv->ht_op_mode);
-
if (!(pmlmepriv->ht_op_mode & HT_INFO_OPERATION_MODE_NON_GF_DEVS_PRESENT) &&
pmlmepriv->num_sta_ht_no_gf) {
pmlmepriv->ht_op_mode |=
@@ -1303,9 +1254,6 @@ static int rtw_ht_operation_update(struct adapter *padapter)
op_mode_changes++;
}
- DBG_88E("%s new operation mode = 0x%X changes =%d\n",
- __func__, pmlmepriv->ht_op_mode, op_mode_changes);
-
return op_mode_changes;
}
@@ -1416,9 +1364,6 @@ void bss_cap_update_on_sta_join(struct adapter *padapter, struct sta_info *psta)
if (psta->flags & WLAN_STA_HT) {
u16 ht_capab = le16_to_cpu(psta->htpriv.ht_cap.cap_info);
- DBG_88E("HT: STA %pM HT Capabilities Info: 0x%04x\n",
- (psta->hwaddr), ht_capab);
-
if (psta->no_ht_set) {
psta->no_ht_set = 0;
pmlmepriv->num_sta_no_ht--;
@@ -1429,9 +1374,6 @@ void bss_cap_update_on_sta_join(struct adapter *padapter, struct sta_info *psta)
psta->no_ht_gf_set = 1;
pmlmepriv->num_sta_ht_no_gf++;
}
- DBG_88E("%s STA %pM - no greenfield, num of non-gf stations %d\n",
- __func__, (psta->hwaddr),
- pmlmepriv->num_sta_ht_no_gf);
}
if ((ht_capab & IEEE80211_HT_CAP_SUP_WIDTH_20_40) == 0) {
@@ -1439,20 +1381,12 @@ void bss_cap_update_on_sta_join(struct adapter *padapter, struct sta_info *psta)
psta->ht_20mhz_set = 1;
pmlmepriv->num_sta_ht_20mhz++;
}
- DBG_88E("%s STA %pM - 20 MHz HT, num of 20MHz HT STAs %d\n",
- __func__, (psta->hwaddr),
- pmlmepriv->num_sta_ht_20mhz);
}
} else {
if (!psta->no_ht_set) {
psta->no_ht_set = 1;
pmlmepriv->num_sta_no_ht++;
}
- if (pmlmepriv->htpriv.ht_option) {
- DBG_88E("%s STA %pM - no HT, num of non-HT stations %d\n",
- __func__, (psta->hwaddr),
- pmlmepriv->num_sta_no_ht);
- }
}
if (rtw_ht_operation_update(padapter) > 0) {
@@ -1462,8 +1396,6 @@ void bss_cap_update_on_sta_join(struct adapter *padapter, struct sta_info *psta)
/* update associated stations cap. */
associated_clients_update(padapter, beacon_updated);
-
- DBG_88E("%s, updated =%d\n", __func__, beacon_updated);
}
u8 bss_cap_update_on_sta_leave(struct adapter *padapter, struct sta_info *psta)
@@ -1526,8 +1458,6 @@ u8 bss_cap_update_on_sta_leave(struct adapter *padapter, struct sta_info *psta)
/* update associated stations cap. */
- DBG_88E("%s, updated =%d\n", __func__, beacon_updated);
-
return beacon_updated;
}
@@ -1580,8 +1510,6 @@ int rtw_sta_flush(struct adapter *padapter)
struct mlme_ext_info *pmlmeinfo = &pmlmeext->mlmext_info;
u8 bc_addr[ETH_ALEN] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff};
- DBG_88E(FUNC_NDEV_FMT"\n", FUNC_NDEV_ARG(padapter->pnetdev));
-
if ((pmlmeinfo->state & 0x03) != WIFI_FW_AP_STATE)
return 0;
@@ -1719,8 +1647,6 @@ void stop_ap_mode(struct adapter *padapter)
}
spin_unlock_bh(&pacl_node_q->lock);
- DBG_88E("%s, free acl_node_queue, num =%d\n", __func__, pacl_list->num);
-
rtw_sta_flush(padapter);
/* free_assoc_sta_resources */
--
2.30.2
next prev parent reply other threads:[~2021-06-15 0:15 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-06-15 0:14 [PATCH 00/28] staging: rtl8188eu: remove DBG_88E callers and macro Phillip Potter
2021-06-15 0:14 ` [PATCH 01/28] staging: rtl8188eu: remove all DBG_88E calls from core/rtw_efuse.c Phillip Potter
2021-06-15 0:14 ` [PATCH 02/28] staging: rtl8188eu: remove all DBG_88E calls from core/rtw_xmit.c Phillip Potter
2021-06-15 0:14 ` [PATCH 03/28] staging: rtl8188eu: remove all DBG_88E calls from core/rtw_mlme_ext.c Phillip Potter
2021-06-15 10:32 ` Dan Carpenter
2021-06-15 21:15 ` Phillip Potter
2021-06-15 0:14 ` [PATCH 04/28] staging: rtl8188eu: remove all DBG_88E calls from core/rtw_wlan_util.c Phillip Potter
2021-06-15 0:14 ` Phillip Potter [this message]
2021-06-15 0:14 ` [PATCH 06/28] staging: rtl8188eu: remove all DBG_88E calls from core/rtw_pwrctrl.c Phillip Potter
2021-06-15 0:14 ` [PATCH 07/28] staging: rtl8188eu: remove all DBG_88E calls from core/rtw_ieee80211.c Phillip Potter
2021-06-15 0:14 ` [PATCH 08/28] staging: rtl8188eu: remove all DBG_88E calls from core/rtw_security.c Phillip Potter
2021-06-15 0:14 ` [PATCH 09/28] staging: rtl8188eu: remove all DBG_88E calls from core/rtw_ioctl_set.c Phillip Potter
2021-06-15 0:14 ` [PATCH 10/28] staging: rtl8188eu: remove all DBG_88E calls from core/rtw_mlme.c Phillip Potter
2021-06-15 0:14 ` [PATCH 11/28] staging: rtl8188eu: remove all DBG_88E calls from os_dep/ioctl_linux.c Phillip Potter
2021-06-15 0:14 ` [PATCH 12/28] staging: rtl8188eu: remove all DBG_88E calls from os_dep/usb_intf.c Phillip Potter
2021-06-15 0:14 ` [PATCH 13/28] staging: rtl8188eu: remove all DBG_88E calls from os_dep/os_intfs.c Phillip Potter
2021-06-15 0:14 ` [PATCH 14/28] staging: rtl8188eu: remove all DBG_88E calls from os_dep/mlme_linux.c Phillip Potter
2021-06-15 0:14 ` [PATCH 15/28] staging: rtl8188eu: remove all DBG_88E calls from os_dep/xmit_linux.c Phillip Potter
2021-06-15 0:14 ` [PATCH 16/28] staging: rtl8188eu: remove all DBG_88E calls from os_dep/rtw_android.c Phillip Potter
2021-06-15 0:14 ` [PATCH 17/28] staging: rtl8188eu: remove all DBG_88E calls from hal/hal_intf.c Phillip Potter
2021-06-15 0:14 ` [PATCH 18/28] staging: rtl8188eu: remove all DBG_88E calls from hal/rtl8188e_cmd.c Phillip Potter
2021-06-15 0:14 ` [PATCH 19/28] staging: rtl8188eu: remove all DBG_88E calls from hal/pwrseqcmd.c Phillip Potter
2021-06-15 0:14 ` [PATCH 20/28] staging: rtl8188eu: remove all DBG_88E calls from hal/rtl8188e_hal_init.c Phillip Potter
2021-06-15 0:15 ` [PATCH 21/28] staging: rtl8188eu: remove all DBG_88E calls from hal/rtl8188e_xmit.c Phillip Potter
2021-06-15 0:15 ` [PATCH 22/28] staging: rtl8188eu: remove all DBG_88E calls from hal/usb_halinit.c Phillip Potter
2021-06-15 12:41 ` Dan Carpenter
2021-06-15 21:08 ` Phillip Potter
2021-06-15 0:15 ` [PATCH 23/28] staging: rtl8188eu: remove all DBG_88E calls from hal/rtl8188eu_recv.c Phillip Potter
2021-06-15 0:15 ` [PATCH 24/28] staging: rtl8188eu: remove all DBG_88E calls from hal/rtl8188eu_xmit.c Phillip Potter
2021-06-15 0:15 ` [PATCH 25/28] staging: rtl8188eu: remove converted netdev_dbg calls from core/rtw_recv.c Phillip Potter
2021-06-15 0:15 ` [PATCH 26/28] staging: rtl8188eu: remove converted netdev_dbg calls from core/rtw_sta_mgt.c Phillip Potter
2021-06-15 0:15 ` [PATCH 27/28] staging: rtl8188eu: remove core/rtw_debug.c Phillip Potter
2021-06-15 0:15 ` [PATCH 28/28] staging: rtl8188eu: remove DBG_88E macro definition Phillip Potter
2021-06-15 11:57 ` [PATCH 00/28] staging: rtl8188eu: remove DBG_88E callers and macro Greg KH
2021-06-15 21:05 ` Phillip Potter
2021-06-15 12:51 ` Dan Carpenter
2021-06-15 21:10 ` Phillip Potter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210615001507.1171-6-phil@philpotter.co.uk \
--to=phil@philpotter.co.uk \
--cc=Larry.Finger@lwfinger.net \
--cc=dan.carpenter@oracle.com \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-staging@lists.linux.dev \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).