linux-staging.lists.linux.dev archive mirror
 help / color / mirror / Atom feed
From: Martin Kepplinger <martin.kepplinger@puri.sm>
To: laurent.pinchart@ideasonboard.com, slongerbeam@gmail.com,
	p.zabel@pengutronix.de, mchehab@kernel.org,
	gregkh@linuxfoundation.org, shawnguo@kernel.org
Cc: kernel@pengutronix.de, festevam@gmail.com, linux-imx@nxp.com,
	linux-media@vger.kernel.org, linux-staging@lists.linux.dev,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, kernel@puri.sm,
	Martin Kepplinger <martin.kepplinger@puri.sm>
Subject: [PATCH v2 2/2] media: imx: imx8mq-mipi-csi2: remove unneeded state variable and function
Date: Tue,  7 Mar 2023 16:00:47 +0100	[thread overview]
Message-ID: <20230307150047.1486186-3-martin.kepplinger@puri.sm> (raw)
In-Reply-To: <20230307150047.1486186-1-martin.kepplinger@puri.sm>

Clean up the driver a bit by inlining the imx8mq_mipi_csi_system_enable()
function to the callsites and removing the hs_settle variable from the
driver state.

Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
---
 drivers/staging/media/imx/imx8mq-mipi-csi2.c | 41 ++++++++------------
 1 file changed, 16 insertions(+), 25 deletions(-)

diff --git a/drivers/staging/media/imx/imx8mq-mipi-csi2.c b/drivers/staging/media/imx/imx8mq-mipi-csi2.c
index 1aa8622a3bae..f10b59b8f1c0 100644
--- a/drivers/staging/media/imx/imx8mq-mipi-csi2.c
+++ b/drivers/staging/media/imx/imx8mq-mipi-csi2.c
@@ -119,9 +119,8 @@ struct csi_state {
 
 	struct v4l2_mbus_config_mipi_csi2 bus;
 
-	struct mutex lock; /* Protect state and hs_settle */
+	struct mutex lock; /* Protect state */
 	u32 state;
-	u32 hs_settle;
 
 	struct regmap *phy_gpr;
 	u8 phy_gpr_reg;
@@ -264,23 +263,6 @@ static int imx8mq_mipi_csi_sw_reset(struct csi_state *state)
 	return 0;
 }
 
-static void imx8mq_mipi_csi_system_enable(struct csi_state *state, int on)
-{
-	if (!on) {
-		imx8mq_mipi_csi_write(state, CSI2RX_CFG_DISABLE_DATA_LANES, 0xf);
-		return;
-	}
-
-	regmap_update_bits(state->phy_gpr,
-			   state->phy_gpr_reg,
-			   0x3fff,
-			   GPR_CSI2_1_RX_ENABLE |
-			   GPR_CSI2_1_VID_INTFC_ENB |
-			   GPR_CSI2_1_HSEL |
-			   GPR_CSI2_1_CONT_CLK_MODE |
-			   GPR_CSI2_1_S_PRG_RXHS_SETTLE(state->hs_settle));
-}
-
 static void imx8mq_mipi_csi_set_params(struct csi_state *state)
 {
 	int lanes = state->bus.num_data_lanes;
@@ -321,7 +303,8 @@ static int imx8mq_mipi_csi_clk_get(struct csi_state *state)
 }
 
 static int imx8mq_mipi_csi_calc_hs_settle(struct csi_state *state,
-					  struct v4l2_subdev_state *sd_state)
+					  struct v4l2_subdev_state *sd_state,
+					  u32 *hs_settle)
 {
 	s64 link_freq;
 	u32 lane_rate;
@@ -377,10 +360,10 @@ static int imx8mq_mipi_csi_calc_hs_settle(struct csi_state *state,
 	max_ths_settle = 140 + 10 * 1000000 / (lane_rate / 1000);
 	ths_settle_ns = (min_ths_settle + max_ths_settle) / 2;
 
-	state->hs_settle = ths_settle_ns / esc_clk_period_ns - 1;
+	*hs_settle = ths_settle_ns / esc_clk_period_ns - 1;
 
 	dev_dbg(state->dev, "lane rate %u Ths_settle %u hs_settle %u\n",
-		lane_rate, ths_settle_ns, state->hs_settle);
+		lane_rate, ths_settle_ns, *hs_settle);
 
 	return 0;
 }
@@ -389,24 +372,32 @@ static int imx8mq_mipi_csi_start_stream(struct csi_state *state,
 					struct v4l2_subdev_state *sd_state)
 {
 	int ret;
+	u32 hs_settle;
 
 	ret = imx8mq_mipi_csi_sw_reset(state);
 	if (ret)
 		return ret;
 
 	imx8mq_mipi_csi_set_params(state);
-	ret = imx8mq_mipi_csi_calc_hs_settle(state, sd_state);
+	ret = imx8mq_mipi_csi_calc_hs_settle(state, sd_state, &hs_settle);
 	if (ret)
 		return ret;
 
-	imx8mq_mipi_csi_system_enable(state, true);
+	regmap_update_bits(state->phy_gpr,
+			   state->phy_gpr_reg,
+			   0x3fff,
+			   GPR_CSI2_1_RX_ENABLE |
+			   GPR_CSI2_1_VID_INTFC_ENB |
+			   GPR_CSI2_1_HSEL |
+			   GPR_CSI2_1_CONT_CLK_MODE |
+			   GPR_CSI2_1_S_PRG_RXHS_SETTLE(hs_settle));
 
 	return 0;
 }
 
 static void imx8mq_mipi_csi_stop_stream(struct csi_state *state)
 {
-	imx8mq_mipi_csi_system_enable(state, false);
+	imx8mq_mipi_csi_write(state, CSI2RX_CFG_DISABLE_DATA_LANES, 0xf);
 }
 
 /* -----------------------------------------------------------------------------
-- 
2.30.2


  parent reply	other threads:[~2023-03-07 15:01 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-03-07 15:00 [PATCH v2 0/2] media: imx: imx8mq-mipi-csi2: Use V4L2 subdev state Martin Kepplinger
2023-03-07 15:00 ` [PATCH v2 1/2] media: imx: imx8mq-mipi-csi2: Use V4L2 subdev active state Martin Kepplinger
2023-03-12 13:31   ` Laurent Pinchart
2023-03-12 13:39     ` Laurent Pinchart
2023-03-12 14:05       ` Martin Kepplinger
2023-03-07 15:00 ` Martin Kepplinger [this message]
2023-03-12 13:37   ` [PATCH v2 2/2] media: imx: imx8mq-mipi-csi2: remove unneeded state variable and function Laurent Pinchart
2023-03-12 14:04     ` Martin Kepplinger
2023-03-25  9:59       ` Martin Kepplinger
2023-03-25 18:49         ` Laurent Pinchart

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230307150047.1486186-3-martin.kepplinger@puri.sm \
    --to=martin.kepplinger@puri.sm \
    --cc=festevam@gmail.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=kernel@pengutronix.de \
    --cc=kernel@puri.sm \
    --cc=laurent.pinchart@ideasonboard.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-imx@nxp.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=linux-staging@lists.linux.dev \
    --cc=mchehab@kernel.org \
    --cc=p.zabel@pengutronix.de \
    --cc=shawnguo@kernel.org \
    --cc=slongerbeam@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).