From: Sowjanya Komatineni <skomatineni@nvidia.com>
To: <skomatineni@nvidia.com>, <thierry.reding@gmail.com>,
<jonathanh@nvidia.com>, <frankc@nvidia.com>, <hverkuil@xs4all.nl>,
<sakari.ailus@iki.fi>, <robh+dt@kernel.org>,
<helen.koike@collabora.com>
Cc: <digetx@gmail.com>, <sboyd@kernel.org>,
<gregkh@linuxfoundation.org>, <linux-media@vger.kernel.org>,
<devicetree@vger.kernel.org>, <linux-tegra@vger.kernel.org>,
<linux-kernel@vger.kernel.org>, <linux-i2c@vger.kernel.org>
Subject: [RFC PATCH v5 09/14] dt-bindings: tegra: Update VI and CSI bindings with port info
Date: Mon, 27 Jul 2020 13:57:27 -0700 [thread overview]
Message-ID: <1595883452-17343-10-git-send-email-skomatineni@nvidia.com> (raw)
In-Reply-To: <1595883452-17343-1-git-send-email-skomatineni@nvidia.com>
Update VI and CSI bindings to add port and endpoint nodes as per
media video-interfaces DT binding document.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
---
.../display/tegra/nvidia,tegra20-host1x.txt | 92 +++++++++++++++++++++-
1 file changed, 90 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt
index 4731921..ac63ae4a 100644
--- a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt
+++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt
@@ -51,8 +51,16 @@ of the following host1x client modules:
- vi
- Tegra210:
- power-domains: Must include venc powergate node as vi is in VE partition.
- - Tegra210 has CSI part of VI sharing same host interface and register space.
- So, VI device node should have CSI child node.
+
+ ports (optional node)
+ vi can have optional ports node and max 6 ports are supported. Each port
+ should have single 'endpoint' child node. All port nodes are grouped under
+ ports node. Please refer to the bindings defined in
+ Documentation/devicetree/bindings/media/video-interfaces.txt
+
+ csi (required node)
+ Tegra210 has CSI part of VI sharing same host interface and register space.
+ So, VI device node should have CSI child node.
- csi: mipi csi interface to vi
@@ -65,6 +73,46 @@ of the following host1x client modules:
- power-domains: Must include sor powergate node as csicil is in
SOR partition.
+ channel (optional nodes)
+ Maximum 6 channels are supported with each csi brick as either x4 or x2
+ based on hw connectivity to sensor.
+
+ Required properties:
+ - reg: csi port number. Valid port numbers are 0 through 5.
+ - nvidia,mipi-calibrate: Should contain a phandle and a specifier
+ specifying which pads are used by this CSI port and need to be
+ calibrated. See also ../display/tegra/nvidia,tegra114-mipi.txt.
+
+ Each channel node must contain 2 port nodes which can be grouped
+ under 'ports' node and each port should have a single child 'endpoint'
+ node.
+
+ ports node
+ Please refer to the bindings defined in
+ Documentation/devicetree/bindings/media/video-interfaces.txt
+
+ ports node must contain below 2 port nodes.
+ port@0 with single child 'endpoint' node always a sink.
+ port@1 with single child 'endpoint' node always a source.
+
+ port@0 (required node)
+ Required properties:
+ - reg: 0
+
+ endpoint (required node)
+ Required properties:
+ - data-lanes: an array of data lane from 1 to 4. Valid array
+ lengths are 1/2/4.
+ - remote-endpoint: phandle to sensor 'endpoint' node.
+
+ port@1 (required node)
+ Required properties:
+ - reg: 1
+
+ endpoint (required node)
+ Required properties:
+ - remote-endpoint: phandle to vi port 'endpoint' node.
+
- epp: encoder pre-processor
Required properties:
@@ -340,6 +388,18 @@ Example:
ranges = <0x0 0x0 0x54080000 0x2000>;
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ imx219_vi_in0: endpoint {
+ remote-endpoint = <&imx219_csi_out0>;
+ };
+ };
+ };
+
csi@838 {
compatible = "nvidia,tegra210-csi";
reg = <0x838 0x1300>;
@@ -362,6 +422,34 @@ Example:
<&tegra_car TEGRA210_CLK_CSI_TPG>;
clock-names = "csi", "cilab", "cilcd", "cile", "csi_tpg";
power-domains = <&pd_sor>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ channel@0 {
+ reg = <0>;
+ nvidia,mipi-calibrate = <&mipi 0x001>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ imx219_csi_in0: endpoint {
+ data-lanes = <1 2>;
+ remote-endpoint = <&imx219_out0>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ imx219_csi_out0: endpoint {
+ remote-endpoint = <&imx219_vi_in0>;
+ };
+ };
+ };
+ };
};
};
--
2.7.4
next prev parent reply other threads:[~2020-07-27 20:52 UTC|newest]
Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-07-27 20:57 [RFC PATCH v5 00/14] Support for Tegra video capture from external sensor Sowjanya Komatineni
2020-07-27 20:57 ` [RFC PATCH v5 01/14] i2c: tegra: Don't mark VI I2C as IRQ safe runtime PM Sowjanya Komatineni
2020-07-28 16:33 ` Wolfram Sang
2020-07-27 20:57 ` [RFC PATCH v5 02/14] i2c: tegra: Remove NULL pointer check before clk_enable/disable/prepare/unprepare Sowjanya Komatineni
2020-07-28 16:33 ` Wolfram Sang
2020-07-27 20:57 ` [RFC PATCH v5 03/14] i2c: tegra: Fix the error path in tegra_i2c_runtime_resume Sowjanya Komatineni
2020-07-28 16:33 ` Wolfram Sang
2020-07-27 20:57 ` [RFC PATCH v5 04/14] i2c: tegra: Fix runtime resume to re-init VI I2C Sowjanya Komatineni
2020-07-28 16:33 ` Wolfram Sang
2020-07-27 20:57 ` [RFC PATCH v5 05/14] i2c: tegra: Avoid tegra_i2c_init_dma() for Tegra210 vi i2c Sowjanya Komatineni
2020-07-28 16:34 ` Wolfram Sang
2020-07-27 20:57 ` [RFC PATCH v5 06/14] media: tegra-video: Fix channel format alignment Sowjanya Komatineni
2020-07-27 20:57 ` [RFC PATCH v5 07/14] media: tegra-video: Enable TPG based on kernel config Sowjanya Komatineni
2020-07-27 20:57 ` [RFC PATCH v5 08/14] media: tegra-video: Update format lookup to offset based Sowjanya Komatineni
2020-07-27 20:57 ` Sowjanya Komatineni [this message]
2020-07-27 20:57 ` [RFC PATCH v5 10/14] media: tegra-video: Add support for external sensor capture Sowjanya Komatineni
2020-07-27 20:57 ` [RFC PATCH v5 11/14] media: tegra-video: Add support for selection ioctl ops Sowjanya Komatineni
2020-07-27 20:57 ` [RFC PATCH v5 12/14] gpu: host1x: mipi: Keep MIPI clock enabled till calibration is done Sowjanya Komatineni
2020-07-28 11:03 ` Dmitry Osipenko
2020-07-28 16:04 ` Sowjanya Komatineni
2020-07-29 17:08 ` Dmitry Osipenko
2020-07-29 17:55 ` Sowjanya Komatineni
2020-07-29 23:42 ` Dmitry Osipenko
2020-07-29 23:54 ` Sowjanya Komatineni
2020-07-30 0:31 ` Dmitry Osipenko
2020-07-27 20:57 ` [RFC PATCH v5 13/14] media: tegra-video: Add CSI MIPI pads calibration Sowjanya Komatineni
2020-07-28 10:30 ` Dmitry Osipenko
2020-07-28 15:59 ` Sowjanya Komatineni
2020-07-28 19:43 ` Sowjanya Komatineni
2020-07-29 23:25 ` Dmitry Osipenko
2020-07-29 23:59 ` Sowjanya Komatineni
2020-07-30 0:27 ` Sowjanya Komatineni
2020-07-30 0:43 ` Dmitry Osipenko
2020-07-30 0:52 ` Sowjanya Komatineni
2020-07-30 0:55 ` Sowjanya Komatineni
2020-07-30 0:53 ` Dmitry Osipenko
2020-07-30 1:06 ` Sowjanya Komatineni
2020-07-30 1:10 ` Dmitry Osipenko
2020-07-30 0:47 ` Sowjanya Komatineni
2020-07-27 20:57 ` [RFC PATCH v5 14/14] media: tegra-video: Compute settle times based on the clock rate Sowjanya Komatineni
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1595883452-17343-10-git-send-email-skomatineni@nvidia.com \
--to=skomatineni@nvidia.com \
--cc=devicetree@vger.kernel.org \
--cc=digetx@gmail.com \
--cc=frankc@nvidia.com \
--cc=gregkh@linuxfoundation.org \
--cc=helen.koike@collabora.com \
--cc=hverkuil@xs4all.nl \
--cc=jonathanh@nvidia.com \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=linux-tegra@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=sakari.ailus@iki.fi \
--cc=sboyd@kernel.org \
--cc=thierry.reding@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).