linux-usb.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Nagarjuna Kristam <nkristam@nvidia.com>
To: <balbi@kernel.org>, <gregkh@linuxfoundation.org>,
	<thierry.reding@gmail.com>, <jonathanh@nvidia.com>,
	<mark.rutland@arm.com>, <robh+dt@kernel.org>
Cc: <devicetree@vger.kernel.org>, <linux-tegra@vger.kernel.org>,
	<linux-usb@vger.kernel.org>,
	Nagarjuna Kristam <nkristam@nvidia.com>
Subject: [Patch V6 1/8] phy: tegra: xusb: Add XUSB dual mode support on Tegra210
Date: Thu, 8 Aug 2019 15:07:19 +0530	[thread overview]
Message-ID: <1565257046-9890-2-git-send-email-nkristam@nvidia.com> (raw)
In-Reply-To: <1565257046-9890-1-git-send-email-nkristam@nvidia.com>

Configure the port capabilities based on usb_dr_mode settings.

Based on work by JC Kuo <jckuo@nvidia.com>.

Signed-off-by: Nagarjuna Kristam <nkristam@nvidia.com>
Reviewed-by: JC Kuo <jckuo@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
---
 drivers/phy/tegra/xusb-tegra210.c | 20 ++++++++++++++++++--
 1 file changed, 18 insertions(+), 2 deletions(-)

diff --git a/drivers/phy/tegra/xusb-tegra210.c b/drivers/phy/tegra/xusb-tegra210.c
index 0c0df68..0351c4a 100644
--- a/drivers/phy/tegra/xusb-tegra210.c
+++ b/drivers/phy/tegra/xusb-tegra210.c
@@ -39,7 +39,10 @@
 #define XUSB_PADCTL_USB2_PAD_MUX_USB2_BIAS_PAD_XUSB 0x1
 
 #define XUSB_PADCTL_USB2_PORT_CAP 0x008
+#define XUSB_PADCTL_USB2_PORT_CAP_PORTX_CAP_DISABLED(x) (0x0 << ((x) * 4))
 #define XUSB_PADCTL_USB2_PORT_CAP_PORTX_CAP_HOST(x) (0x1 << ((x) * 4))
+#define XUSB_PADCTL_USB2_PORT_CAP_PORTX_CAP_DEVICE(x) (0x2 << ((x) * 4))
+#define XUSB_PADCTL_USB2_PORT_CAP_PORTX_CAP_OTG(x) (0x3 << ((x) * 4))
 #define XUSB_PADCTL_USB2_PORT_CAP_PORTX_CAP_MASK(x) (0x3 << ((x) * 4))
 
 #define XUSB_PADCTL_SS_PORT_MAP 0x014
@@ -64,6 +67,7 @@
 #define XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPADX_CTL1(x) (0x084 + (x) * 0x40)
 #define XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_LEV_SHIFT 7
 #define XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_LEV_MASK 0x3
+#define XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_LEV_VAL 0x1
 #define XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_FIX18 (1 << 6)
 
 #define XUSB_PADCTL_USB2_OTG_PADX_CTL0(x) (0x088 + (x) * 0x40)
@@ -957,7 +961,14 @@ static int tegra210_usb2_phy_power_on(struct phy *phy)
 
 	value = padctl_readl(padctl, XUSB_PADCTL_USB2_PORT_CAP);
 	value &= ~XUSB_PADCTL_USB2_PORT_CAP_PORTX_CAP_MASK(index);
-	value |= XUSB_PADCTL_USB2_PORT_CAP_PORTX_CAP_HOST(index);
+	if (port->mode == USB_DR_MODE_UNKNOWN)
+		value |= XUSB_PADCTL_USB2_PORT_CAP_PORTX_CAP_DISABLED(index);
+	else if (port->mode == USB_DR_MODE_PERIPHERAL)
+		value |= XUSB_PADCTL_USB2_PORT_CAP_PORTX_CAP_DEVICE(index);
+	else if (port->mode == USB_DR_MODE_HOST)
+		value |= XUSB_PADCTL_USB2_PORT_CAP_PORTX_CAP_HOST(index);
+	else if (port->mode == USB_DR_MODE_OTG)
+		value |= XUSB_PADCTL_USB2_PORT_CAP_PORTX_CAP_OTG(index);
 	padctl_writel(padctl, value, XUSB_PADCTL_USB2_PORT_CAP);
 
 	value = padctl_readl(padctl, XUSB_PADCTL_USB2_OTG_PADX_CTL0(index));
@@ -989,7 +1000,12 @@ static int tegra210_usb2_phy_power_on(struct phy *phy)
 			     XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPADX_CTL1(index));
 	value &= ~(XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_LEV_MASK <<
 		   XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_LEV_SHIFT);
-	value |= XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_FIX18;
+	if (port->mode == USB_DR_MODE_HOST)
+		value |= XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_FIX18;
+	else
+		value |=
+		      XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_LEV_VAL <<
+		      XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_LEV_SHIFT;
 	padctl_writel(padctl, value,
 		      XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPADX_CTL1(index));
 
-- 
2.7.4


  reply	other threads:[~2019-08-08  9:38 UTC|newest]

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-08-08  9:37 [Patch V6 0/8] Tegra XUSB gadget driver support Nagarjuna Kristam
2019-08-08  9:37 ` Nagarjuna Kristam [this message]
2019-08-08  9:37 ` [Patch V6 2/8] phy: tegra: xusb: Add usb3 port fake support on Tegra210 Nagarjuna Kristam
2019-08-08  9:37 ` [Patch V6 3/8] phy: tegra: xusb: Add vbus override " Nagarjuna Kristam
2019-08-22  9:04   ` Thierry Reding
2019-08-08  9:37 ` [Patch V6 4/8] dt-bindings: usb: Add NVIDIA Tegra XUSB device mode controller binding Nagarjuna Kristam
2019-08-21 20:52   ` Rob Herring
2019-08-22  9:04   ` Thierry Reding
2019-08-08  9:37 ` [Patch V6 5/8] arm64: tegra: Add xudc node for Tegra210 Nagarjuna Kristam
2019-08-08  9:37 ` [Patch V6 6/8] arm64: tegra: Enable xudc on Jetson TX1 Nagarjuna Kristam
2019-08-08  9:37 ` [Patch V6 7/8] usb: gadget: Add UDC driver for tegra XUSB device mode controller Nagarjuna Kristam
2019-08-09 12:03   ` Felipe Balbi
2019-08-22 10:29     ` Nagarjuna Kristam
2019-08-09 14:28   ` kbuild test robot
2019-08-12 12:43   ` Chunfeng Yun
2019-08-12 12:49     ` Felipe Balbi
2019-08-12 13:00       ` Chunfeng Yun
2019-08-13 10:16     ` Nagarjuna Kristam
2019-08-22  9:12   ` Thierry Reding
2019-08-22 10:35     ` Nagarjuna Kristam
2019-08-08  9:37 ` [Patch V6 8/8] arm64: defconfig: Enable tegra XUDC driver Nagarjuna Kristam
2019-08-22  9:07 ` [Patch V6 0/8] Tegra XUSB gadget driver support Thierry Reding

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1565257046-9890-2-git-send-email-nkristam@nvidia.com \
    --to=nkristam@nvidia.com \
    --cc=balbi@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=jonathanh@nvidia.com \
    --cc=linux-tegra@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=robh+dt@kernel.org \
    --cc=thierry.reding@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).