[    5.092980] usbcore: registered new interface driver asix
[    5.754924] asix 1-8:1.0 (unnamed net_device) (uninitialized): asix_get_phy_addr()
[    5.754931] asix 1-8:1.0 (unnamed net_device) (uninitialized): asix_get_phy_addr() returning 0x10e0
[    5.754993] asix 1-8:1.0 (unnamed net_device) (uninitialized): asix_write_gpio() - value = 0x00b0
[    6.011491] asix 1-8:1.0 (unnamed net_device) (uninitialized): asix_write_rx_ctl() - mode = 0x0088
[    6.011607] asix 1-8:1.0 (unnamed net_device) (uninitialized): asix_write_medium_mode() - mode = 0x0336
[    6.011783] asix 1-8:1.0 (unnamed net_device) (uninitialized): asix_write_rx_ctl() - mode = 0x0088
[    6.011909] asix 1-8:1.0 (unnamed net_device) (uninitialized): RX_CTL is 0x0088 after all initializations
[    6.011976] asix 1-8:1.0 (unnamed net_device) (uninitialized): Medium Status is 0x0336 after all initializations
[    6.013536] asix 1-8:1.0 (unnamed net_device) (uninitialized): asix_mdio_read() phy_id=0x10, loc=0x02, returns=0x003b
[    6.015049] asix 1-8:1.0 (unnamed net_device) (uninitialized): asix_mdio_read() phy_id=0x10, loc=0x03, returns=0x1811
[    6.015055] asix 1-8:1.0 (unnamed net_device) (uninitialized): PHYID=0x003b1811
[    6.015547] asix 1-8:1.0 eth0: register 'asix' at usb-0000:00:14.0-8, ASIX AX88772 USB 2.0 Ethernet, 00:10:60:31:d5:f8
[    8.552935] asix 1-8:1.0 eth0: asix_write_rx_ctl() - mode = 0x0088
[    8.553071] asix 1-8:1.0 eth0: asix_write_medium_mode() - mode = 0x0336
[    8.695480] asix 1-8:1.0 eth0: Link Status is: 1
[    8.697051] asix 1-8:1.0 eth0: asix_mdio_read() phy_id=0x10, loc=0x01, returns=0x782d
[    8.698505] asix 1-8:1.0 eth0: asix_mdio_read() phy_id=0x10, loc=0x01, returns=0x782d
[    8.700084] asix 1-8:1.0 eth0: asix_mdio_read() phy_id=0x10, loc=0x04, returns=0x01e1
[    8.701512] asix 1-8:1.0 eth0: asix_mdio_read() phy_id=0x10, loc=0x05, returns=0xc1e1
[    8.701519] asix 1-8:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xC1E1
[    8.710838] asix 1-8:1.0 eth0: asix_mdio_read() phy_id=0x10, loc=0x00, returns=0x3100
[    8.712254] asix 1-8:1.0 eth0: asix_mdio_read() phy_id=0x10, loc=0x01, returns=0x782d
[    8.714408] asix 1-8:1.0 eth0: asix_mdio_read() phy_id=0x10, loc=0x04, returns=0x01e1
[    8.716032] asix 1-8:1.0 eth0: asix_mdio_read() phy_id=0x10, loc=0x05, returns=0xc1e1
[    8.716039] asix 1-8:1.0 eth0: ax88772_link_reset() speed: 100 duplex: 1 setting mode to 0x0336
[    8.716042] asix 1-8:1.0 eth0: asix_write_medium_mode() - mode = 0x0336
[   23.421900] asix 1-8:1.0 eth0: asix_write_rx_ctl() - mode = 0x0088
[   23.422171] asix 1-8:1.0 eth0: asix_write_medium_mode() - mode = 0x0336