linux-usb.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Wesley Cheng <wcheng@codeaurora.org>
To: vkoul@kernel.org, agross@kernel.org, bjorn.andersson@linaro.org,
	kishon@ti.com, balbi@kernel.org, gregkh@linuxfoundation.org,
	robh+dt@kernel.org
Cc: linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
	linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org,
	jackp@codeaurora.org, Wesley Cheng <wcheng@codeaurora.org>
Subject: [PATCH v2 4/4] usb: dwc3: dwc3-qcom: Fix typo in the dwc3 vbus override API
Date: Fri,  9 Oct 2020 01:28:43 -0700	[thread overview]
Message-ID: <20201009082843.28503-5-wcheng@codeaurora.org> (raw)
In-Reply-To: <20201009082843.28503-1-wcheng@codeaurora.org>

There was an extra character in the dwc3_qcom_vbus_override_enable()
function.  Removed the extra character.

Signed-off-by: Wesley Cheng <wcheng@codeaurora.org>
---
 drivers/usb/dwc3/dwc3-qcom.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/usb/dwc3/dwc3-qcom.c b/drivers/usb/dwc3/dwc3-qcom.c
index 340760ef0e01..236afbfe01d9 100644
--- a/drivers/usb/dwc3/dwc3-qcom.c
+++ b/drivers/usb/dwc3/dwc3-qcom.c
@@ -107,7 +107,7 @@ static inline void dwc3_qcom_clrbits(void __iomem *base, u32 offset, u32 val)
 	readl(base + offset);
 }
 
-static void dwc3_qcom_vbus_overrride_enable(struct dwc3_qcom *qcom, bool enable)
+static void dwc3_qcom_vbus_override_enable(struct dwc3_qcom *qcom, bool enable)
 {
 	if (enable) {
 		dwc3_qcom_setbits(qcom->qscratch_base, QSCRATCH_SS_PHY_CTRL,
@@ -128,7 +128,7 @@ static int dwc3_qcom_vbus_notifier(struct notifier_block *nb,
 	struct dwc3_qcom *qcom = container_of(nb, struct dwc3_qcom, vbus_nb);
 
 	/* enable vbus override for device mode */
-	dwc3_qcom_vbus_overrride_enable(qcom, event);
+	dwc3_qcom_vbus_override_enable(qcom, event);
 	qcom->mode = event ? USB_DR_MODE_PERIPHERAL : USB_DR_MODE_HOST;
 
 	return NOTIFY_DONE;
@@ -140,7 +140,7 @@ static int dwc3_qcom_host_notifier(struct notifier_block *nb,
 	struct dwc3_qcom *qcom = container_of(nb, struct dwc3_qcom, host_nb);
 
 	/* disable vbus override in host mode */
-	dwc3_qcom_vbus_overrride_enable(qcom, !event);
+	dwc3_qcom_vbus_override_enable(qcom, !event);
 	qcom->mode = event ? USB_DR_MODE_HOST : USB_DR_MODE_PERIPHERAL;
 
 	return NOTIFY_DONE;
@@ -223,7 +223,7 @@ static int dwc3_qcom_usb_role_switch_set(struct usb_role_switch *sw,
 
 	qcom->mode = (role == USB_ROLE_HOST) ? USB_DR_MODE_HOST :
 					       USB_DR_MODE_PERIPHERAL;
-	dwc3_qcom_vbus_overrride_enable(qcom, enable);
+	dwc3_qcom_vbus_override_enable(qcom, enable);
 	return 0;
 }
 
@@ -750,7 +750,7 @@ static int dwc3_qcom_probe(struct platform_device *pdev)
 
 	/* enable vbus override for device mode */
 	if (qcom->mode == USB_DR_MODE_PERIPHERAL)
-		dwc3_qcom_vbus_overrride_enable(qcom, true);
+		dwc3_qcom_vbus_override_enable(qcom, true);
 
 	if (dwc3_qcom_find_usb_connector(pdev)) {
 		ret = dwc3_qcom_setup_role_switch(qcom);
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project


      parent reply	other threads:[~2020-10-09  8:29 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-10-09  8:28 [PATCH v2 0/4] Enable USB type C support on SM8150 Wesley Cheng
2020-10-09  8:28 ` [PATCH v2 1/4] arm64: boot: dts: qcom: sm8150: Add nodes for PMIC based typec detection Wesley Cheng
2020-10-09  8:28 ` [PATCH v2 2/4] phy: qcom-qmp: Register as a typec switch for orientation detection Wesley Cheng
2020-10-09  8:28 ` [PATCH v2 3/4] usb: dwc3: dwc3-qcom: Find USB connector and register role switch Wesley Cheng
2020-10-09  8:28 ` Wesley Cheng [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201009082843.28503-5-wcheng@codeaurora.org \
    --to=wcheng@codeaurora.org \
    --cc=agross@kernel.org \
    --cc=balbi@kernel.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=jackp@codeaurora.org \
    --cc=kishon@ti.com \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=vkoul@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).