From: Serge Semin <Sergey.Semin@baikalelectronics.ru>
To: "Mathias Nyman" <mathias.nyman@intel.com>,
"Felipe Balbi" <balbi@kernel.org>,
"Greg Kroah-Hartman" <gregkh@linuxfoundation.org>,
"Rob Herring" <robh+dt@kernel.org>,
"Alexey Brodkin" <abrodkin@synopsys.com>,
"Vineet Gupta" <vgupta@synopsys.com>,
"Hauke Mehrtens" <hauke@hauke-m.de>,
"Rafał Miłecki" <zajec5@gmail.com>,
bcm-kernel-feedback-list@broadcom.com,
"Wei Xu" <xuwei5@hisilicon.com>,
"Vladimir Zapolskiy" <vz@mleia.com>,
"Maxime Coquelin" <mcoquelin.stm32@gmail.com>,
"Alexandre Torgue" <alexandre.torgue@st.com>,
"Paul Cercueil" <paul@crapouillou.net>,
"Thomas Bogendoerfer" <tsbogend@alpha.franken.de>,
"Matthias Brugger" <matthias.bgg@gmail.com>,
"Michael Ellerman" <mpe@ellerman.id.au>,
"Benjamin Herrenschmidt" <benh@kernel.crashing.org>,
"Paul Mackerras" <paulus@samba.org>
Cc: Serge Semin <Sergey.Semin@baikalelectronics.ru>,
Serge Semin <fancer.lancer@gmail.com>,
Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>,
Pavel Parkhomenko <Pavel.Parkhomenko@baikalelectronics.ru>,
Andy Gross <agross@kernel.org>,
Bjorn Andersson <bjorn.andersson@linaro.org>,
Manu Gautam <mgautam@codeaurora.org>,
Roger Quadros <rogerq@ti.com>,
Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>,
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>,
Neil Armstrong <narmstrong@baylibre.com>,
Kevin Hilman <khilman@baylibre.com>,
<linux-arm-kernel@lists.infradead.org>,
<linux-snps-arc@lists.infradead.org>,
<linux-mips@vger.kernel.org>, <linuxppc-dev@lists.ozlabs.org>,
<linux-usb@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-kernel@vger.kernel.org>,
<linux-stm32@st-md-mailman.stormreply.com>,
<linux-mediatek@lists.infradead.org>
Subject: [PATCH 18/20] arch: dts: Fix EHCI/OHCI DT nodes name
Date: Wed, 14 Oct 2020 13:14:00 +0300 [thread overview]
Message-ID: <20201014101402.18271-19-Sergey.Semin@baikalelectronics.ru> (raw)
In-Reply-To: <20201014101402.18271-1-Sergey.Semin@baikalelectronics.ru>
In accordance with the Generic EHCI/OHCI bindings the corresponding node
name is suppose to comply with the Generic USB HCD DT schema, which
requires the USB nodes to have the name acceptable by the regexp:
"^usb(@.*)?" . Let's fix the DTS files, which have the nodes defined with
incompatible names.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
---
Please, test the patch out to make sure it doesn't brake the dependent DTS
files. I did only a manual grepping of the possible nodes dependencies.
---
arch/arc/boot/dts/axs10x_mb.dtsi | 4 ++--
arch/arc/boot/dts/hsdk.dts | 4 ++--
arch/arc/boot/dts/vdk_axs10x_mb.dtsi | 2 +-
arch/arm/boot/dts/bcm5301x.dtsi | 4 ++--
arch/arm/boot/dts/bcm53573.dtsi | 4 ++--
arch/arm/boot/dts/hisi-x5hd2.dtsi | 4 ++--
arch/arm/boot/dts/lpc18xx.dtsi | 4 ++--
arch/arm/boot/dts/stm32mp151.dtsi | 4 ++--
arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi | 4 ++--
arch/arm64/boot/dts/hisilicon/hip06.dtsi | 4 ++--
arch/arm64/boot/dts/hisilicon/hip07.dtsi | 4 ++--
arch/mips/boot/dts/ingenic/jz4740.dtsi | 2 +-
arch/mips/boot/dts/ingenic/jz4770.dtsi | 2 +-
arch/mips/boot/dts/mti/sead3.dts | 2 +-
arch/mips/boot/dts/ralink/mt7628a.dtsi | 2 +-
arch/powerpc/boot/dts/akebono.dts | 6 +++---
16 files changed, 28 insertions(+), 28 deletions(-)
diff --git a/arch/arc/boot/dts/axs10x_mb.dtsi b/arch/arc/boot/dts/axs10x_mb.dtsi
index 99d3e7175bf7..b64435385304 100644
--- a/arch/arc/boot/dts/axs10x_mb.dtsi
+++ b/arch/arc/boot/dts/axs10x_mb.dtsi
@@ -87,13 +87,13 @@ gmac: ethernet@18000 {
mac-address = [00 00 00 00 00 00]; /* Filled in by U-Boot */
};
- ehci@40000 {
+ usb@40000 {
compatible = "generic-ehci";
reg = < 0x40000 0x100 >;
interrupts = < 8 >;
};
- ohci@60000 {
+ usb@60000 {
compatible = "generic-ohci";
reg = < 0x60000 0x100 >;
interrupts = < 8 >;
diff --git a/arch/arc/boot/dts/hsdk.dts b/arch/arc/boot/dts/hsdk.dts
index dcaa44e408ac..fdd4f7f635d3 100644
--- a/arch/arc/boot/dts/hsdk.dts
+++ b/arch/arc/boot/dts/hsdk.dts
@@ -234,7 +234,7 @@ phy0: ethernet-phy@0 { /* Micrel KSZ9031 */
};
};
- ohci@60000 {
+ usb@60000 {
compatible = "snps,hsdk-v1.0-ohci", "generic-ohci";
reg = <0x60000 0x100>;
interrupts = <15>;
@@ -242,7 +242,7 @@ ohci@60000 {
dma-coherent;
};
- ehci@40000 {
+ usb@40000 {
compatible = "snps,hsdk-v1.0-ehci", "generic-ehci";
reg = <0x40000 0x100>;
interrupts = <15>;
diff --git a/arch/arc/boot/dts/vdk_axs10x_mb.dtsi b/arch/arc/boot/dts/vdk_axs10x_mb.dtsi
index cbb179770293..90a412026e64 100644
--- a/arch/arc/boot/dts/vdk_axs10x_mb.dtsi
+++ b/arch/arc/boot/dts/vdk_axs10x_mb.dtsi
@@ -46,7 +46,7 @@ ethernet@18000 {
clock-names = "stmmaceth";
};
- ehci@40000 {
+ usb@40000 {
compatible = "generic-ehci";
reg = < 0x40000 0x100 >;
interrupts = < 8 >;
diff --git a/arch/arm/boot/dts/bcm5301x.dtsi b/arch/arm/boot/dts/bcm5301x.dtsi
index 0016720ce530..bf5656d79a55 100644
--- a/arch/arm/boot/dts/bcm5301x.dtsi
+++ b/arch/arm/boot/dts/bcm5301x.dtsi
@@ -261,7 +261,7 @@ usb2: usb2@21000 {
interrupt-parent = <&gic>;
- ehci: ehci@21000 {
+ ehci: usb@21000 {
#usb-cells = <0>;
compatible = "generic-ehci";
@@ -283,7 +283,7 @@ ehci_port2: port@2 {
};
};
- ohci: ohci@22000 {
+ ohci: usb@22000 {
#usb-cells = <0>;
compatible = "generic-ohci";
diff --git a/arch/arm/boot/dts/bcm53573.dtsi b/arch/arm/boot/dts/bcm53573.dtsi
index 4af8e3293cff..51546fccc616 100644
--- a/arch/arm/boot/dts/bcm53573.dtsi
+++ b/arch/arm/boot/dts/bcm53573.dtsi
@@ -135,7 +135,7 @@ usb2: usb2@4000 {
#address-cells = <1>;
#size-cells = <1>;
- ehci: ehci@4000 {
+ ehci: usb@4000 {
compatible = "generic-ehci";
reg = <0x4000 0x1000>;
interrupt-parent = <&gic>;
@@ -155,7 +155,7 @@ ehci_port2: port@2 {
};
};
- ohci: ohci@d000 {
+ ohci: usb@d000 {
#usb-cells = <0>;
compatible = "generic-ohci";
diff --git a/arch/arm/boot/dts/hisi-x5hd2.dtsi b/arch/arm/boot/dts/hisi-x5hd2.dtsi
index 3ee7967c202d..693b85b2cc7d 100644
--- a/arch/arm/boot/dts/hisi-x5hd2.dtsi
+++ b/arch/arm/boot/dts/hisi-x5hd2.dtsi
@@ -452,14 +452,14 @@ gmac1: ethernet@1841000 {
status = "disabled";
};
- usb0: ehci@1890000 {
+ usb0: usb@1890000 {
compatible = "generic-ehci";
reg = <0x1890000 0x1000>;
interrupts = <0 66 4>;
clocks = <&clock HIX5HD2_USB_CLK>;
};
- usb1: ohci@1880000 {
+ usb1: usb@1880000 {
compatible = "generic-ohci";
reg = <0x1880000 0x1000>;
interrupts = <0 67 4>;
diff --git a/arch/arm/boot/dts/lpc18xx.dtsi b/arch/arm/boot/dts/lpc18xx.dtsi
index 10b8249b8ab6..82ffd7b0ad8a 100644
--- a/arch/arm/boot/dts/lpc18xx.dtsi
+++ b/arch/arm/boot/dts/lpc18xx.dtsi
@@ -121,7 +121,7 @@ mmcsd: mmcsd@40004000 {
status = "disabled";
};
- usb0: ehci@40006100 {
+ usb0: usb@40006100 {
compatible = "nxp,lpc1850-ehci", "generic-ehci";
reg = <0x40006100 0x100>;
interrupts = <8>;
@@ -133,7 +133,7 @@ usb0: ehci@40006100 {
status = "disabled";
};
- usb1: ehci@40007100 {
+ usb1: usb@40007100 {
compatible = "nxp,lpc1850-ehci", "generic-ehci";
reg = <0x40007100 0x100>;
interrupts = <9>;
diff --git a/arch/arm/boot/dts/stm32mp151.dtsi b/arch/arm/boot/dts/stm32mp151.dtsi
index bfe29023fbd5..576f7da564c5 100644
--- a/arch/arm/boot/dts/stm32mp151.dtsi
+++ b/arch/arm/boot/dts/stm32mp151.dtsi
@@ -1404,7 +1404,7 @@ ethernet0: ethernet@5800a000 {
status = "disabled";
};
- usbh_ohci: usbh-ohci@5800c000 {
+ usbh_ohci: usb@5800c000 {
compatible = "generic-ohci";
reg = <0x5800c000 0x1000>;
clocks = <&rcc USBH>;
@@ -1413,7 +1413,7 @@ usbh_ohci: usbh-ohci@5800c000 {
status = "disabled";
};
- usbh_ehci: usbh-ehci@5800d000 {
+ usbh_ehci: usb@5800d000 {
compatible = "generic-ehci";
reg = <0x5800d000 0x1000>;
clocks = <&rcc USBH>;
diff --git a/arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi b/arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi
index 12bc1d3ed424..a4acecb75c89 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi
@@ -585,7 +585,7 @@ pcie: pcie@9860000 {
status = "disabled";
};
- ohci: ohci@9880000 {
+ ohci: usb@9880000 {
compatible = "generic-ohci";
reg = <0x9880000 0x10000>;
interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
@@ -600,7 +600,7 @@ ohci: ohci@9880000 {
status = "disabled";
};
- ehci: ehci@9890000 {
+ ehci: usb@9890000 {
compatible = "generic-ehci";
reg = <0x9890000 0x10000>;
interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm64/boot/dts/hisilicon/hip06.dtsi b/arch/arm64/boot/dts/hisilicon/hip06.dtsi
index 50ceaa959bdc..1226440d54ad 100644
--- a/arch/arm64/boot/dts/hisilicon/hip06.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hip06.dtsi
@@ -373,7 +373,7 @@ refclk: refclk {
#clock-cells = <0>;
};
- usb_ohci: ohci@a7030000 {
+ usb_ohci: usb@a7030000 {
compatible = "generic-ohci";
reg = <0x0 0xa7030000 0x0 0x10000>;
interrupt-parent = <&mbigen_usb>;
@@ -382,7 +382,7 @@ usb_ohci: ohci@a7030000 {
status = "disabled";
};
- usb_ehci: ehci@a7020000 {
+ usb_ehci: usb@a7020000 {
compatible = "generic-ehci";
reg = <0x0 0xa7020000 0x0 0x10000>;
interrupt-parent = <&mbigen_usb>;
diff --git a/arch/arm64/boot/dts/hisilicon/hip07.dtsi b/arch/arm64/boot/dts/hisilicon/hip07.dtsi
index 4773a533fce5..93f99a5255ac 100644
--- a/arch/arm64/boot/dts/hisilicon/hip07.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hip07.dtsi
@@ -1253,7 +1253,7 @@ uart0: uart@602b0000 {
status = "disabled";
};
- usb_ohci: ohci@a7030000 {
+ usb_ohci: usb@a7030000 {
compatible = "generic-ohci";
reg = <0x0 0xa7030000 0x0 0x10000>;
interrupt-parent = <&mbigen_usb>;
@@ -1262,7 +1262,7 @@ usb_ohci: ohci@a7030000 {
status = "disabled";
};
- usb_ehci: ehci@a7020000 {
+ usb_ehci: usb@a7020000 {
compatible = "generic-ehci";
reg = <0x0 0xa7020000 0x0 0x10000>;
interrupt-parent = <&mbigen_usb>;
diff --git a/arch/mips/boot/dts/ingenic/jz4740.dtsi b/arch/mips/boot/dts/ingenic/jz4740.dtsi
index 1520585c235c..b989ff62ffbc 100644
--- a/arch/mips/boot/dts/ingenic/jz4740.dtsi
+++ b/arch/mips/boot/dts/ingenic/jz4740.dtsi
@@ -281,7 +281,7 @@ dmac: dma-controller@13020000 {
clocks = <&cgu JZ4740_CLK_DMA>;
};
- uhc: uhc@13030000 {
+ uhc: usb@13030000 {
compatible = "ingenic,jz4740-ohci", "generic-ohci";
reg = <0x13030000 0x1000>;
diff --git a/arch/mips/boot/dts/ingenic/jz4770.dtsi b/arch/mips/boot/dts/ingenic/jz4770.dtsi
index fa11ac950499..e45c03038826 100644
--- a/arch/mips/boot/dts/ingenic/jz4770.dtsi
+++ b/arch/mips/boot/dts/ingenic/jz4770.dtsi
@@ -417,7 +417,7 @@ dmac1: dma-controller@13420100 {
interrupts = <23>;
};
- uhc: uhc@13430000 {
+ uhc: usb@13430000 {
compatible = "generic-ohci";
reg = <0x13430000 0x1000>;
diff --git a/arch/mips/boot/dts/mti/sead3.dts b/arch/mips/boot/dts/mti/sead3.dts
index 192c26ff1d3d..1cf6728af8fe 100644
--- a/arch/mips/boot/dts/mti/sead3.dts
+++ b/arch/mips/boot/dts/mti/sead3.dts
@@ -56,7 +56,7 @@ gic: interrupt-controller@1b1c0000 {
interrupt-parent = <&cpu_intc>;
};
- ehci@1b200000 {
+ usb@1b200000 {
compatible = "generic-ehci";
reg = <0x1b200000 0x1000>;
diff --git a/arch/mips/boot/dts/ralink/mt7628a.dtsi b/arch/mips/boot/dts/ralink/mt7628a.dtsi
index 892e8ab863c5..45bf96a3d17a 100644
--- a/arch/mips/boot/dts/ralink/mt7628a.dtsi
+++ b/arch/mips/boot/dts/ralink/mt7628a.dtsi
@@ -275,7 +275,7 @@ usb_phy: usb-phy@10120000 {
reset-names = "host", "device";
};
- ehci@101c0000 {
+ usb@101c0000 {
compatible = "generic-ehci";
reg = <0x101c0000 0x1000>;
diff --git a/arch/powerpc/boot/dts/akebono.dts b/arch/powerpc/boot/dts/akebono.dts
index df18f8dc4642..343326c30380 100644
--- a/arch/powerpc/boot/dts/akebono.dts
+++ b/arch/powerpc/boot/dts/akebono.dts
@@ -126,7 +126,7 @@ SATA0: sata@30000010000 {
interrupts = <93 2>;
};
- EHCI0: ehci@30010000000 {
+ EHCI0: usb@30010000000 {
compatible = "ibm,476gtr-ehci", "generic-ehci";
reg = <0x300 0x10000000 0x0 0x10000>;
interrupt-parent = <&MPIC>;
@@ -140,14 +140,14 @@ SD0: sd@30000000000 {
interrupt-parent = <&MPIC>;
};
- OHCI0: ohci@30010010000 {
+ OHCI0: usb@30010010000 {
compatible = "ibm,476gtr-ohci", "generic-ohci";
reg = <0x300 0x10010000 0x0 0x10000>;
interrupt-parent = <&MPIC>;
interrupts = <89 1>;
};
- OHCI1: ohci@30010020000 {
+ OHCI1: usb@30010020000 {
compatible = "ibm,476gtr-ohci", "generic-ohci";
reg = <0x300 0x10020000 0x0 0x10000>;
interrupt-parent = <&MPIC>;
--
2.27.0
next prev parent reply other threads:[~2020-10-14 10:15 UTC|newest]
Thread overview: 73+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-10-14 10:13 [PATCH 00/20] dt-bindings: usb: Add generic USB HCD, xHCI, DWC USB3 DT schema Serge Semin
2020-10-14 10:13 ` [PATCH 01/20] dt-bindings: usb: usb-hcd: Convert generic USB properties to " Serge Semin
2020-10-16 18:33 ` Rob Herring
2020-10-14 10:13 ` [PATCH 02/20] dt-bindings: usb: usb-hcd: Add "otg-rev" property restriction Serge Semin
2020-10-16 18:33 ` Rob Herring
2020-10-14 10:13 ` [PATCH 03/20] dt-bindings: usb: usb-hcd: Add "ulpi/serial/hsic" PHY types Serge Semin
2020-10-16 18:34 ` Rob Herring
2020-10-14 10:13 ` [PATCH 04/20] dt-bindings: usb: usb-hcd: Add "tpl-support" property Serge Semin
2020-10-14 13:27 ` Rob Herring
2020-10-14 17:27 ` Serge Semin
2020-10-16 15:44 ` Rob Herring
2020-10-16 18:47 ` Rob Herring
2020-10-14 10:13 ` [PATCH 05/20] dt-bindings: usb: usb-hcd: Add generic "usb-phy" property Serge Semin
2020-10-16 18:47 ` Rob Herring
2020-10-14 10:13 ` [PATCH 06/20] dt-bindings: usb: Convert xHCI bindings to DT schema Serge Semin
2020-10-16 18:49 ` Rob Herring
2020-10-14 10:13 ` [PATCH 07/20] dt-bindings: usb: xhci: Add Broadcom STB v2 compatible device Serge Semin
2020-10-15 16:39 ` Florian Fainelli
2020-10-16 18:49 ` Rob Herring
2020-10-14 10:13 ` [PATCH 08/20] dt-bindings: usb: renesas-xhci: Refer to the usb-xhci.yaml file Serge Semin
2020-10-16 18:50 ` Rob Herring
2020-10-20 4:42 ` Yoshihiro Shimoda
2020-10-14 10:13 ` [PATCH 09/20] dt-bindings: usb: Convert DWC USB3 bindings to DT schema Serge Semin
2020-10-14 13:32 ` Rob Herring
2020-10-14 17:37 ` Serge Semin
2020-10-14 10:13 ` [PATCH 10/20] dt-bindings: usb: dwc3: Add interrupt-names property support Serge Semin
2020-10-16 18:50 ` Rob Herring
2020-10-14 10:13 ` [PATCH 11/20] dt-bindings: usb: dwc3: Add synopsys,dwc3 compatible string Serge Semin
2020-10-14 20:18 ` Krzysztof Kozlowski
2020-10-14 21:35 ` Serge Semin
2020-10-16 18:53 ` Rob Herring
2020-10-19 16:22 ` Serge Semin
2020-10-14 10:13 ` [PATCH 12/20] dt-bindings: usb: dwc3: Add Tx De-emphasis restrictions Serge Semin
2020-10-16 18:54 ` Rob Herring
2020-10-14 10:13 ` [PATCH 13/20] dt-bindings: usb: dwc3: Add Frame Length Adj restrictions Serge Semin
2020-10-16 18:54 ` Rob Herring
2020-10-14 10:13 ` [PATCH 14/20] dt-bindings: usb: meson-g12a-usb: Fix FL-adj property value Serge Semin
2020-10-16 18:54 ` Rob Herring
2020-10-16 20:46 ` Martin Blumenstingl
2020-10-14 10:13 ` [PATCH 15/20] dt-bindings: usb: meson-g12a-usb: Validate DWC2/DWC3 sub-nodes Serge Semin
2020-10-16 18:54 ` Rob Herring
2020-10-16 20:47 ` Martin Blumenstingl
2020-10-14 10:13 ` [PATCH 16/20] dt-bindings: usb: keystone-dwc3: Validate DWC3 sub-node Serge Semin
2020-10-16 18:55 ` Rob Herring
2020-10-14 10:13 ` [PATCH 17/20] dt-bindings: usb: qcom,dwc3: " Serge Semin
2020-10-16 18:55 ` Rob Herring
2020-10-14 10:14 ` Serge Semin [this message]
2020-10-14 18:00 ` [PATCH 18/20] arch: dts: Fix EHCI/OHCI DT nodes name Florian Fainelli
2020-10-14 18:11 ` Serge Semin
2020-10-14 18:41 ` Florian Fainelli
2020-10-14 21:21 ` Serge Semin
2020-10-14 18:56 ` Paul Cercueil
2020-10-14 19:12 ` Alexey Brodkin
2020-10-15 8:05 ` Amelie DELAUNAY
2020-10-15 16:37 ` Florian Fainelli
2020-10-16 7:08 ` Alexandre Torgue
2020-10-16 8:52 ` Serge Semin
2020-10-14 10:14 ` [PATCH 19/20] arch: dts: Fix xHCI " Serge Semin
2020-10-14 10:14 ` [PATCH 20/20] arch: dts: Fix DWC USB3 " Serge Semin
2020-10-14 10:33 ` Krzysztof Kozlowski
2020-10-14 17:16 ` Serge Semin
2020-10-14 20:04 ` Krzysztof Kozlowski
2020-10-14 23:51 ` Serge Semin
2020-10-15 6:14 ` Krzysztof Kozlowski
2020-10-15 14:15 ` Serge Semin
2020-10-14 14:09 ` Felipe Balbi
2020-10-14 14:37 ` Serge Semin
2020-10-14 18:35 ` Rob Herring
2020-10-14 21:22 ` Serge Semin
2020-10-15 10:15 ` Felipe Balbi
2020-10-15 13:53 ` Serge Semin
2020-10-15 14:04 ` Maxime Ripard
2020-10-14 17:39 ` [PATCH 00/20] dt-bindings: usb: Add generic USB HCD, xHCI, DWC USB3 DT schema Serge Semin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201014101402.18271-19-Sergey.Semin@baikalelectronics.ru \
--to=sergey.semin@baikalelectronics.ru \
--cc=Alexey.Malahov@baikalelectronics.ru \
--cc=Pavel.Parkhomenko@baikalelectronics.ru \
--cc=abrodkin@synopsys.com \
--cc=agross@kernel.org \
--cc=alexandre.torgue@st.com \
--cc=balbi@kernel.org \
--cc=bcm-kernel-feedback-list@broadcom.com \
--cc=benh@kernel.crashing.org \
--cc=bjorn.andersson@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=fancer.lancer@gmail.com \
--cc=gregkh@linuxfoundation.org \
--cc=hauke@hauke-m.de \
--cc=khilman@baylibre.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=linux-mips@vger.kernel.org \
--cc=linux-snps-arc@lists.infradead.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=linux-usb@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=mathias.nyman@intel.com \
--cc=matthias.bgg@gmail.com \
--cc=mcoquelin.stm32@gmail.com \
--cc=mgautam@codeaurora.org \
--cc=mpe@ellerman.id.au \
--cc=narmstrong@baylibre.com \
--cc=paul@crapouillou.net \
--cc=paulus@samba.org \
--cc=prabhakar.mahadev-lad.rj@bp.renesas.com \
--cc=robh+dt@kernel.org \
--cc=rogerq@ti.com \
--cc=tsbogend@alpha.franken.de \
--cc=vgupta@synopsys.com \
--cc=vz@mleia.com \
--cc=xuwei5@hisilicon.com \
--cc=yoshihiro.shimoda.uh@renesas.com \
--cc=zajec5@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).