linux-usb.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Rui Miguel Silva <rui.silva@linaro.org>,
	Dietmar Eggemann <dietmar.eggemann@arm.com>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Sasha Levin <sashal@kernel.org>,
	linux-usb@vger.kernel.org
Subject: [PATCH AUTOSEL 5.14 241/252] usb: isp1760: write to status and address register
Date: Thu,  9 Sep 2021 07:40:55 -0400	[thread overview]
Message-ID: <20210909114106.141462-241-sashal@kernel.org> (raw)
In-Reply-To: <20210909114106.141462-1-sashal@kernel.org>

From: Rui Miguel Silva <rui.silva@linaro.org>

[ Upstream commit 36815a4a0763bb405ebd776c45553005c1ef7a15 ]

We were already writing directly the port status register to
trigger changes in isp1763. The same is needed in other IP
from the family, including also to setup the read address
before reading from device.

Reported-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Link: https://lore.kernel.org/r/20210827131154.4151862-4-rui.silva@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/isp1760/isp1760-hcd.c | 23 +++++++++++------------
 1 file changed, 11 insertions(+), 12 deletions(-)

diff --git a/drivers/usb/isp1760/isp1760-hcd.c b/drivers/usb/isp1760/isp1760-hcd.c
index d2d19548241e..e517376c3291 100644
--- a/drivers/usb/isp1760/isp1760-hcd.c
+++ b/drivers/usb/isp1760/isp1760-hcd.c
@@ -182,7 +182,7 @@ struct urb_listitem {
 	struct urb *urb;
 };
 
-static const u32 isp1763_hc_portsc1_fields[] = {
+static const u32 isp176x_hc_portsc1_fields[] = {
 	[PORT_OWNER]		= BIT(13),
 	[PORT_POWER]		= BIT(12),
 	[PORT_LSTATUS]		= BIT(10),
@@ -205,27 +205,28 @@ static u32 isp1760_hcd_read(struct usb_hcd *hcd, u32 field)
 }
 
 /*
- * We need, in isp1763, to write directly the values to the portsc1
+ * We need, in isp176x, to write directly the values to the portsc1
  * register so it will make the other values to trigger.
  */
 static void isp1760_hcd_portsc1_set_clear(struct isp1760_hcd *priv, u32 field,
 					  u32 val)
 {
-	u32 bit = isp1763_hc_portsc1_fields[field];
-	u32 port_status = readl(priv->base + ISP1763_HC_PORTSC1);
+	u32 bit = isp176x_hc_portsc1_fields[field];
+	u16 portsc1_reg = priv->is_isp1763 ? ISP1763_HC_PORTSC1 :
+		ISP176x_HC_PORTSC1;
+	u32 port_status = readl(priv->base + portsc1_reg);
 
 	if (val)
-		writel(port_status | bit, priv->base + ISP1763_HC_PORTSC1);
+		writel(port_status | bit, priv->base + portsc1_reg);
 	else
-		writel(port_status & ~bit, priv->base + ISP1763_HC_PORTSC1);
+		writel(port_status & ~bit, priv->base + portsc1_reg);
 }
 
 static void isp1760_hcd_write(struct usb_hcd *hcd, u32 field, u32 val)
 {
 	struct isp1760_hcd *priv = hcd_to_priv(hcd);
 
-	if (unlikely(priv->is_isp1763 &&
-		     (field >= PORT_OWNER && field <= PORT_CONNECT)))
+	if (unlikely((field >= PORT_OWNER && field <= PORT_CONNECT)))
 		return isp1760_hcd_portsc1_set_clear(priv, field, val);
 
 	isp1760_field_write(priv->fields, field, val);
@@ -367,8 +368,7 @@ static void isp1760_mem_read(struct usb_hcd *hcd, u32 src_offset, void *dst,
 {
 	struct isp1760_hcd *priv = hcd_to_priv(hcd);
 
-	isp1760_hcd_write(hcd, MEM_BANK_SEL, ISP_BANK_0);
-	isp1760_hcd_write(hcd, MEM_START_ADDR, src_offset);
+	isp1760_reg_write(priv->regs, ISP176x_HC_MEMORY, src_offset);
 	ndelay(100);
 
 	bank_reads8(priv->base, src_offset, ISP_BANK_0, dst, bytes);
@@ -496,8 +496,7 @@ static void isp1760_ptd_read(struct usb_hcd *hcd, u32 ptd_offset, u32 slot,
 	u16 src_offset = ptd_offset + slot * sizeof(*ptd);
 	struct isp1760_hcd *priv = hcd_to_priv(hcd);
 
-	isp1760_hcd_write(hcd, MEM_BANK_SEL, ISP_BANK_0);
-	isp1760_hcd_write(hcd, MEM_START_ADDR, src_offset);
+	isp1760_reg_write(priv->regs, ISP176x_HC_MEMORY, src_offset);
 	ndelay(90);
 
 	bank_reads8(priv->base, src_offset, ISP_BANK_0, (void *)ptd,
-- 
2.30.2


  parent reply	other threads:[~2021-09-09 12:02 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <20210909114106.141462-1-sashal@kernel.org>
2021-09-09 11:37 ` [PATCH AUTOSEL 5.14 039/252] usb: host: fotg210: fix the endpoint's transactional opportunities calculation Sasha Levin
2021-09-09 11:37 ` [PATCH AUTOSEL 5.14 040/252] usb: host: fotg210: fix the actual_length of an iso packet Sasha Levin
2021-09-09 11:37 ` [PATCH AUTOSEL 5.14 041/252] usb: gadget: u_ether: fix a potential null pointer dereference Sasha Levin
2021-09-09 11:37 ` [PATCH AUTOSEL 5.14 042/252] USB: EHCI: ehci-mv: improve error handling in mv_ehci_enable() Sasha Levin
2021-09-09 11:37 ` [PATCH AUTOSEL 5.14 043/252] usb: gadget: composite: Allow bMaxPower=0 if self-powered Sasha Levin
2021-09-09 11:39 ` [PATCH AUTOSEL 5.14 134/252] thunderbolt: Fix port linking by checking all adapters Sasha Levin
2021-09-09 11:39 ` [PATCH AUTOSEL 5.14 181/252] usb: chipidea: host: fix port index underflow and UBSAN complains Sasha Levin
2021-09-09 11:40 ` [PATCH AUTOSEL 5.14 215/252] Revert "USB: xhci: fix U1/U2 handling for hardware with XHCI_INTEL_HOST quirk set" Sasha Levin
2021-09-09 11:40 ` [PATCH AUTOSEL 5.14 216/252] usb: dwc3: imx8mp: request irq after initializing dwc3 Sasha Levin
2021-09-09 11:40 ` [PATCH AUTOSEL 5.14 217/252] usb: musb: musb_dsps: request_irq() after initializing musb Sasha Levin
2021-09-09 11:40 ` [PATCH AUTOSEL 5.14 218/252] usbip: give back URBs for unsent unlink requests during cleanup Sasha Levin
2021-09-09 11:40 ` [PATCH AUTOSEL 5.14 219/252] usbip:vhci_hcd USB port can get stuck in the disabled state Sasha Levin
2021-09-09 11:40 ` [PATCH AUTOSEL 5.14 220/252] usb: xhci-mtk: fix use-after-free of mtk->hcd Sasha Levin
2021-09-09 11:40 ` [PATCH AUTOSEL 5.14 221/252] usb: xhci-mtk: Do not use xhci's virt_dev in drop_endpoint Sasha Levin
2021-09-09 11:40 ` [PATCH AUTOSEL 5.14 239/252] usb: isp1760: fix memory pool initialization Sasha Levin
2021-09-09 11:40 ` [PATCH AUTOSEL 5.14 240/252] usb: isp1760: fix qtd fill length Sasha Levin
2021-09-09 11:40 ` Sasha Levin [this message]
2021-09-09 11:40 ` [PATCH AUTOSEL 5.14 242/252] usb: isp1760: use the right irq status bit Sasha Levin
2021-09-09 11:40 ` [PATCH AUTOSEL 5.14 243/252] usb: isp1760: otg control register access Sasha Levin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210909114106.141462-241-sashal@kernel.org \
    --to=sashal@kernel.org \
    --cc=dietmar.eggemann@arm.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=rui.silva@linaro.org \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).