From: Andy Shevchenko <andy.shevchenko@gmail.com>
To: Jack Pham <jackp@codeaurora.org>,
Ruslan Bilovol <ruslan.bilovol@gmail.com>
Cc: Thinh Nguyen <Thinh.Nguyen@synopsys.com>,
Ferry Toth <fntoth@gmail.com>,
"linux-usb@vger.kernel.org" <linux-usb@vger.kernel.org>,
"felipe.balbi-VuQAYsv1563Yd54FQh9/CA@public.gmane.org"
<felipe.balbi-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
Subject: Re: BUG with linux 5.9.0 with dwc3 in gadget mode
Date: Thu, 22 Oct 2020 12:23:35 +0300 [thread overview]
Message-ID: <CAHp75Ve5CnPqV3FAgS08CnvT9Oskyxhh2VEBBDgeWpprFEuu=Q@mail.gmail.com> (raw)
In-Reply-To: <20201021014725.GA26640@jackp-linux.qualcomm.com>
+Cc: Ruslan (maybe you have an insight)
On Wed, Oct 21, 2020 at 3:03 PM Jack Pham <jackp@codeaurora.org> wrote:
>
> Hi Thinh, Ferry,
>
> On Tue, Oct 20, 2020 at 10:58:31PM +0000, Thinh Nguyen wrote:
> > Thinh Nguyen wrote:
> > > Hi,
> > >
> > > Ferry Toth wrote:
> > >> Op 20-10-2020 om 14:32 schreef Felipe Balbi:
> > >>> Hi,
> > >>>
> > >>> Ferry Toth <fntoth@gmail.com> writes:
> > >>>
> > >>> 8< snip
> > >>>
> > >>>>>> [ 12.657416] CR2: 0000000100000000
> > >>>>>> [ 12.660729] ---[ end trace 9b92dea6da33c71e ]---
> > >>>>> It this something you can reproduce on your end? Ferry, can you get
> > >>>>> dwc3
> > >>>>> trace logs when this happens? ftrace_dump_on_oops may help here.
> > >>>> I will do that tonight. Is flipping on ftrace_dump_on_oops
> > >>>> sufficient or
> > >>>> do I need to do more?
> > >>> you'd have to enable dwc3 trace events first ;-)
> > >>>
> > >>>> BTW after posting this I found in host mode dwc3 is not working
> > >>>> properly
> > >>>> either. No oops, but no driver get loaded on device plug in.
> > >>> okay
> > >>>
> > >> Ehem, you maybe only me to enable /dwc3/dwc3_ep_dequeue/enable:
> > >>
> > >> root@edison:/boot# uname -a
> > >> Linux edison 5.9.0-edison-acpi-standard #1 SMP Mon Oct 19 20:17:04 UTC
> > >> 2020 x86_64 x86_64 x86_64 GNU/Linux
> > >> root@edison:/boot# echo 1 >
> > >> /sys/kernel/debug/tracing/events/dwc3/dwc3_ep_dequeue/enable
> > >> root@edison:/boot# echo 1 > /proc/sys/kernel/ftrace_dump_on_oops
> > >> root@edison:/boot#
> > >> root@edison:/boot# [ 2608.585323] BUG: kernel NULL pointer
> > >> dereference, address: 0000000000000000
> > >> [ 2608.592288] #PF: supervisor read access in kernel mode
> > >> [ 2608.597419] #PF: error_code(0x0000) - not-present page
> > >> [ 2608.602549] PGD 0 P4D 0
> > >> [ 2608.605090] Oops: 0000 [#1] SMP PTI
> > >> [ 2608.608580] CPU: 1 PID: 733 Comm: irq/15-dwc3 Not tainted
> > >> 5.9.0-edison-acpi-standard #1
> > >> [ 2608.616571] Hardware name: Intel Corporation Merrifield/BODEGA BAY,
> > >> BIOS 542 2015.01.21:18.19.48
> > >> [ 2608.625356] RIP: 0010:dwc3_gadget_ep_dequeue+0x41/0x1c0
> > >> [ 2608.630580] Code: e9 51 01 00 00 4c 8d a3 30 01 00 00 4c 89 e7 e8
> > >> 15 e6 42 00 49 8b 4e 48 49 89 c5 49 8d 46 48 48 8d 51 a0 48 39 c8 75
> > >> 0f eb 2e <48> 8b 4a 60 48 8d 51 a0 48 39 c8 74 21 48 39 d5 75 ee 45 31
> > >> f6 4c
> > >> [ 2608.649320] RSP: 0018:ffffa838002a7c40 EFLAGS: 00010087
> > >> [ 2608.654543] RAX: ffff9a5f4609c048 RBX: ffff9a5f46f48028 RCX:
> > >> 0000000000000000
> > >> [ 2608.661666] RDX: ffffffffffffffa0 RSI: 0000000000000008 RDI:
> > >> ffff9a5f46f48158
> > >> [ 2608.668790] RBP: ffff9a5f7bd09b40 R08: 00000000000002d8 R09:
> > >> ffff9a5f7dd6a000
> > >> [ 2608.675913] R10: ffffa838002a7d90 R11: ffff9a5f46f48300 R12:
> > >> ffff9a5f46f48158
> > >> [ 2608.683039] R13: 0000000000000046 R14: ffff9a5f4609c000 R15:
> > >> ffff9a5f7ad77e00
> > >> [ 2608.690165] FS: 0000000000000000(0000) GS:ffff9a5f7e300000(0000)
> > >> knlGS:0000000000000000
> > >> [ 2608.698244] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> > >> [ 2608.703980] CR2: 0000000000000000 CR3: 000000003780a000 CR4:
> > >> 00000000001006e0
> > >> [ 2608.711102] Call Trace:
> > >> [ 2608.713561] usb_ep_dequeue+0x19/0x80
> > >> [ 2608.717234] u_audio_stop_capture+0x54/0x9a [u_audio]
> > >> [ 2608.722289] afunc_set_alt+0x73/0x80 [usb_f_uac2]
> > > I took a look at how the audio function is handling switching alternate
> > > setting and dequeuing endpoints, and I think I found the issue.
> > >
> > > Here's a snippet of the free_ep() code in u_audio.c:
> > >
> > > static inline void free_ep(struct uac_rtd_params *prm, struct usb_ep *ep)
> > > {
> > > .....
> > > for (i = 0; i < params->req_number; i++) {
> > > if (prm->ureq[i].req) {
> > > usb_ep_dequeue(ep, prm->ureq[i].req);
> > > usb_ep_free_request(ep, prm->ureq[i].req);
> > > prm->ureq[i].req = NULL;
> > > }
> > > }
> > > ....
> > >
> > >
> > > usb_ep_dequeue() can be asynchronous. The dwc3 still has ownership of
> > > the request until it gives back the request. Freeing the request
> > > immediately here will cause a problem.
> >
> > To confirm my suspicion, can you try this and see if you still get oops?
> >
> > diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
> > index eec8e9a9e3ed..b66eb24ec070 100644
> > --- a/drivers/usb/dwc3/gadget.c
> > +++ b/drivers/usb/dwc3/gadget.c
> > @@ -2031,6 +2031,7 @@ static int dwc3_gadget_ep_dequeue(struct usb_ep *ep,
> > list_for_each_entry_safe(r, t,
> > &dep->started_list, list)
> > dwc3_gadget_move_cancelled_request(r);
> >
> > + dwc3_gadget_ep_cleanup_cancelled_requests(dep);
> > goto out;
> > }
> > }
> >
> >
> > This will make usb_ep_dequeue() synchronous. (Note that this is not tested).
>
> But only for dwc3 right? In general do other UDC drivers provide
> synchronous behavior? It does states clearly in the kerneldoc for
> usb_ep_dequeue() that the completion is asynchronous. From
> drivers/usb/gadget/udc/core.c:
>
> * If the request is still active on the endpoint, it is dequeued and
> * eventually its completion routine is called (with status -ECONNRESET);
> * else a negative error code is returned. This routine is asynchronous,
> * that is, it may return before the completion routine runs.
>
> Alternatively, could we not fix up u_audio.c to deal with this?
>
> diff --git a/drivers/usb/gadget/function/u_audio.c b/drivers/usb/gadget/function/u_audio.c
> index 56906d15fb55..f08f036d520e 100644
> --- a/drivers/usb/gadget/function/u_audio.c
> +++ b/drivers/usb/gadget/function/u_audio.c
> @@ -89,7 +89,12 @@ static void u_audio_iso_complete(struct usb_ep *ep, struct usb_request *req)
> struct snd_uac_chip *uac = prm->uac;
>
> /* i/f shutting down */
> - if (!prm->ep_enabled || req->status == -ESHUTDOWN)
> + if (!prm->ep_enabled) {
> + usb_ep_free_request(ep, req);
> + return;
> + }
> +
> + if (req->status == -ESHUTDOWN)
> return;
>
> /*
> @@ -352,7 +357,6 @@ static inline void free_ep(struct uac_rtd_params *prm, struct usb_ep *ep)
> for (i = 0; i < params->req_number; i++) {
> if (prm->ureq[i].req) {
> usb_ep_dequeue(ep, prm->ureq[i].req);
> - usb_ep_free_request(ep, prm->ureq[i].req);
> prm->ureq[i].req = NULL;
> }
> }
>
> Jack
--
With Best Regards,
Andy Shevchenko
next prev parent reply other threads:[~2020-10-22 9:23 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-10-16 20:21 BUG with linux 5.9.0 with dwc3 in gadget mode Ferry Toth
2020-10-19 5:45 ` Felipe Balbi
2020-10-19 7:14 ` Ferry Toth
2020-10-19 18:49 ` Ferry Toth
2020-10-20 12:35 ` Felipe Balbi
2020-10-20 21:01 ` Ferry Toth
2020-10-19 7:18 ` Ferry Toth
2020-10-20 12:32 ` Felipe Balbi
2020-10-20 19:46 ` Ferry Toth
2020-10-20 20:37 ` Ferry Toth
2020-10-20 22:10 ` Thinh Nguyen
2020-10-20 22:58 ` Thinh Nguyen
2020-10-21 1:47 ` Jack Pham
2020-10-21 1:56 ` Thinh Nguyen
2020-10-21 20:01 ` Ferry Toth
2020-10-22 9:23 ` Andy Shevchenko [this message]
2020-10-21 19:45 ` Ferry Toth
2020-10-21 19:50 ` Thinh Nguyen
2020-10-21 20:42 ` Ferry Toth
2020-10-21 23:32 ` Thinh Nguyen
2020-10-22 13:43 ` Andy Shevchenko
2020-10-27 20:13 ` Ferry Toth
2020-10-27 21:06 ` Jack Pham
2020-10-27 22:07 ` Ferry Toth
2020-10-27 21:16 ` Andy Shevchenko
2020-10-27 21:54 ` Ferry Toth
2020-10-28 9:18 ` Felipe Balbi
2020-11-05 21:29 ` Ferry Toth
2020-11-06 6:38 ` Felipe Balbi
2020-11-06 8:14 ` Ferry Toth
[not found] ` <326aa23e-fabd-f3d6-4778-d036858413a2@gmail.com>
2020-11-06 14:15 ` Felipe Balbi
[not found] ` <e21a5a77-9017-4cbe-a228-85357d660da5@gmail.com>
2020-11-07 8:01 ` Felipe Balbi
2020-11-07 13:37 ` Ferry Toth
2020-11-09 7:00 ` Felipe Balbi
2020-10-27 21:19 ` Andy Shevchenko
2020-10-19 19:46 ` Andy Shevchenko
2020-10-19 20:46 ` Ferry Toth
2020-10-20 13:27 ` Andy Shevchenko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='CAHp75Ve5CnPqV3FAgS08CnvT9Oskyxhh2VEBBDgeWpprFEuu=Q@mail.gmail.com' \
--to=andy.shevchenko@gmail.com \
--cc=Thinh.Nguyen@synopsys.com \
--cc=felipe.balbi-VuQAYsv1563Yd54FQh9/CA@public.gmane.org \
--cc=fntoth@gmail.com \
--cc=jackp@codeaurora.org \
--cc=linux-usb@vger.kernel.org \
--cc=ruslan.bilovol@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).