Re: [PATCH 3/3] usb: dwc3: Remove generic PHY calibrate() calls

[Anand Moon <linux.amoon@gmail.com>]

Hi Marek,

On Thu, 27 Jun 2019 at 12:47, Marek Szyprowski <m.szyprowski@samsung.com> wrote:
>
> Calls to USB2 generic PHY calibrate() method were added by commit
> d8c80bb3b55b ("phy: exynos5-usbdrd: Calibrate LOS levels for
> exynos5420/5800"), but it turned out that the mentioned patch worked only
> by the pure luck and fixed only one use case. To fix the issues with PHY
> calibration it has been moved to XHCI HCD driver, what allows to perform
> calibration in the proper time window. This patch removes those calls
> from DWC3 driver, as they are no longer needed there.
>
> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>

Please add my tested on XU4 / XU3 using linux next-20190716
Tested-by: Anand Moon <linux.amoon@gmail.com>

Best Regards
-Anand

> ---
>  drivers/usb/dwc3/core.c | 2 --
>  1 file changed, 2 deletions(-)
>
> diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
> index baa029ceede9..f62e8442c614 100644
> --- a/drivers/usb/dwc3/core.c
> +++ b/drivers/usb/dwc3/core.c
> @@ -168,7 +168,6 @@ static void __dwc3_set_mode(struct work_struct *work)
>                                 otg_set_vbus(dwc->usb2_phy->otg, true);
>                         phy_set_mode(dwc->usb2_generic_phy, PHY_MODE_USB_HOST);
>                         phy_set_mode(dwc->usb3_generic_phy, PHY_MODE_USB_HOST);
> -                       phy_calibrate(dwc->usb2_generic_phy);
>                 }
>                 break;
>         case DWC3_GCTL_PRTCAP_DEVICE:
> @@ -1166,7 +1165,6 @@ static int dwc3_core_init_mode(struct dwc3 *dwc)
>                                 dev_err(dev, "failed to initialize host\n");
>                         return ret;
>                 }
> -               phy_calibrate(dwc->usb2_generic_phy);
>                 break;
>         case USB_DR_MODE_OTG:
>                 INIT_WORK(&dwc->drd_work, __dwc3_set_mode);
> --
> 2.17.1
>