From: Jun Li <jun.li@nxp.com>
To: Peter Chen <peter.chen@nxp.com>,
"balbi@kernel.org" <balbi@kernel.org>,
"mathias.nyman@intel.com" <mathias.nyman@intel.com>
Cc: "linux-usb@vger.kernel.org" <linux-usb@vger.kernel.org>,
dl-linux-imx <linux-imx@nxp.com>,
"pawell@cadence.com" <pawell@cadence.com>,
"rogerq@ti.com" <rogerq@ti.com>,
"gregkh@linuxfoundation.org" <gregkh@linuxfoundation.org>
Subject: RE: [PATCH v2 2/9] usb: cdns3: add runtime PM support
Date: Sun, 24 May 2020 05:57:53 +0000 [thread overview]
Message-ID: <VE1PR04MB652836D56801C440F3E3928689B20@VE1PR04MB6528.eurprd04.prod.outlook.com> (raw)
In-Reply-To: <20200523232304.23976-3-peter.chen@nxp.com>
Hi,
> -----Original Message-----
> From: Peter Chen <peter.chen@nxp.com>
> Sent: 2020年5月24日 7:23
> To: balbi@kernel.org; mathias.nyman@intel.com
> Cc: linux-usb@vger.kernel.org; dl-linux-imx <linux-imx@nxp.com>;
> pawell@cadence.com; rogerq@ti.com; gregkh@linuxfoundation.org; Jun Li
> <jun.li@nxp.com>; Peter Chen <peter.chen@nxp.com>
> Subject: [PATCH v2 2/9] usb: cdns3: add runtime PM support
>
> Introduce runtime PM and wakeup interrupt handler for cdns3, the runtime PM is default
> off since other cdns3 has not implemented glue layer support for runtime PM.
>
> When the controller is in low power mode, the lpm flag will be set.
> The interrupt triggered later than lpm flag is set considers as wakeup interrupt
> and handled at cdns_drd_irq. Once the wakeup occurs, it first disables interrupt
> to avoid later interrupt occurrence since the controller is in low power mode at
> that time, and access registers may be invalid at that time. At wakeup handler,
> it will call pm_runtime_get to wakeup controller, and at runtime resume handler,
> it will enable interrupt again.
>
> The API platform_suspend is introduced for glue layer to implement platform specific
> PM sequence.
>
> Signed-off-by: Peter Chen <peter.chen@nxp.com>
> ---
> drivers/usb/cdns3/core.c | 119 +++++++++++++++++++++++++++++++------
> drivers/usb/cdns3/core.h | 14 +++++
> drivers/usb/cdns3/drd.c | 7 +++
> drivers/usb/cdns3/gadget.c | 4 ++
> drivers/usb/cdns3/host.c | 7 +++
> 5 files changed, 134 insertions(+), 17 deletions(-)
>
> diff --git a/drivers/usb/cdns3/core.c b/drivers/usb/cdns3/core.c index
> bfd09aa98c12..5221c1306e64 100644
> --- a/drivers/usb/cdns3/core.c
> +++ b/drivers/usb/cdns3/core.c
> @@ -432,6 +432,7 @@ static int cdns3_probe(struct platform_device *pdev)
> return -ENOMEM;
>
> cdns->dev = dev;
> + cdns->pdata = dev_get_platdata(dev);
>
> platform_set_drvdata(pdev, cdns);
>
> @@ -525,9 +526,11 @@ static int cdns3_probe(struct platform_device *pdev)
> if (ret)
> goto err4;
>
> + spin_lock_init(&cdns->lock);
> device_set_wakeup_capable(dev, true);
> pm_runtime_set_active(dev);
> pm_runtime_enable(dev);
> + pm_runtime_forbid(dev);
>
> /*
> * The controller needs less time between bus and controller suspend, @@ -574,52
> +577,134 @@ static int cdns3_remove(struct platform_device *pdev)
> return 0;
> }
>
> -#ifdef CONFIG_PM_SLEEP
> +#ifdef CONFIG_PM
__maybe_unused
>
> -static int cdns3_suspend(struct device *dev)
> +static int cdns3_set_platform_suspend(struct device *dev,
> + bool suspend, bool wakeup)
> +{
> + struct cdns3 *cdns = dev_get_drvdata(dev);
> + int ret = 0;
> + unsigned long flags;
> +
> + spin_lock_irqsave(&cdns->lock, flags);
> + if (cdns->pdata && cdns->pdata->platform_suspend)
> + ret = cdns->pdata->platform_suspend(dev, suspend, wakeup);
> +
> + spin_unlock_irqrestore(&cdns->lock, flags);
> +
> + return ret;
> +}
> +
> +static int cdns3_controller_suspend(struct device *dev, pm_message_t
> +msg)
> {
> struct cdns3 *cdns = dev_get_drvdata(dev);
> + bool wakeup;
> unsigned long flags;
>
> - if (cdns->role == USB_ROLE_HOST)
> + if (cdns->in_lpm)
> return 0;
>
> - if (pm_runtime_status_suspended(dev))
> - pm_runtime_resume(dev);
> + if (PMSG_IS_AUTO(msg))
> + wakeup = true;
> + else
> + wakeup = false;
wakeup = device_may_wakeup(dev)?
>
> - if (cdns->roles[cdns->role]->suspend) {
> - spin_lock_irqsave(&cdns->gadget_dev->lock, flags);
> - cdns->roles[cdns->role]->suspend(cdns, false);
> - spin_unlock_irqrestore(&cdns->gadget_dev->lock, flags);
> - }
> + cdns3_set_platform_suspend(cdns->dev, true, wakeup);
> + cdns3_set_phy_power(cdns, false);
> + spin_lock_irqsave(&cdns->lock, flags);
> + cdns->in_lpm = true;
> + spin_unlock_irqrestore(&cdns->lock, flags);
>
> return 0;
> }
>
> -static int cdns3_resume(struct device *dev)
> +static int cdns3_controller_resume(struct device *dev, pm_message_t
> +msg)
> {
> struct cdns3 *cdns = dev_get_drvdata(dev);
> + int ret;
> unsigned long flags;
>
> - if (cdns->role == USB_ROLE_HOST)
> + if (!cdns->in_lpm)
> return 0;
>
> - if (cdns->roles[cdns->role]->resume) {
> - spin_lock_irqsave(&cdns->gadget_dev->lock, flags);
> + ret = cdns3_set_phy_power(cdns, true);
> + if (ret)
> + return ret;
> +
> + cdns3_set_platform_suspend(cdns->dev, false, false);
> +
> + spin_lock_irqsave(&cdns->lock, flags);
> + if (cdns->roles[cdns->role]->resume && !PMSG_IS_AUTO(msg))
> cdns->roles[cdns->role]->resume(cdns, false);
> - spin_unlock_irqrestore(&cdns->gadget_dev->lock, flags);
> +
> + cdns->in_lpm = false;
> + spin_unlock_irqrestore(&cdns->lock, flags);
> + if (cdns->wakeup_int) {
> + cdns->wakeup_int = false;
> + if (cdns->role == USB_ROLE_HOST) {
> + /* Trigger xhci-plat.c runtime runtime */
> + pm_runtime_get(&cdns->host_dev->dev);
> + pm_runtime_mark_last_busy(&cdns->host_dev->dev);
> + pm_runtime_put_autosuspend(&cdns->host_dev->dev);
> + /* balence the pm_runtime_get at cdns3_drd_irq */
%s/balence/balance
> + pm_runtime_mark_last_busy(cdns->dev);
> + pm_runtime_put_autosuspend(cdns->dev);
A simple
if (cdns->role == USB_ROLE_HOST)
pm_runtime_resume(&cdns->host_dev->dev);
in low power event handler can't work?
> + }
> +
> + enable_irq(cdns->otg_irq);
> + }
> +
> + return ret;
> +}
> +
> +static int cdns3_runtime_suspend(struct device *dev) {
> + return cdns3_controller_suspend(dev, PMSG_AUTO_SUSPEND); }
> +
> +static int cdns3_runtime_resume(struct device *dev) {
> + return cdns3_controller_resume(dev, PMSG_AUTO_RESUME); } #ifdef
> +CONFIG_PM_SLEEP
> +
> +static int cdns3_suspend(struct device *dev) {
> + struct cdns3 *cdns = dev_get_drvdata(dev);
> + unsigned long flags;
> +
> + if (pm_runtime_status_suspended(dev))
> + pm_runtime_resume(dev);
> +
> + if (cdns->roles[cdns->role]->suspend) {
> + spin_lock_irqsave(&cdns->lock, flags);
> + cdns->roles[cdns->role]->suspend(cdns, false);
Seems this hasn't been used, I did not find the implementation.
this role->suspend() is only to be used in system suspend but not in runtime suspend?
> + spin_unlock_irqrestore(&cdns->lock, flags);
> }
>
> + return cdns3_controller_suspend(dev, PMSG_SUSPEND); }
> +
> +static int cdns3_resume(struct device *dev) {
> + int ret;
> +
> + ret = cdns3_controller_resume(dev, PMSG_RESUME);
> + if (ret)
> + return ret;
> +
> pm_runtime_disable(dev);
> pm_runtime_set_active(dev);
> pm_runtime_enable(dev);
>
> - return 0;
> + return ret;
> }
> -#endif
> +#endif /* CONFIG_PM_SLEEP */
> +#endif /* CONFIG_PM */
>
> static const struct dev_pm_ops cdns3_pm_ops = {
> SET_SYSTEM_SLEEP_PM_OPS(cdns3_suspend, cdns3_resume)
> + SET_RUNTIME_PM_OPS(cdns3_runtime_suspend, cdns3_runtime_resume, NULL)
> };
>
> #ifdef CONFIG_OF
> diff --git a/drivers/usb/cdns3/core.h b/drivers/usb/cdns3/core.h index
> 1ad1f1fe61e9..9eb8aeea2d20 100644
> --- a/drivers/usb/cdns3/core.h
> +++ b/drivers/usb/cdns3/core.h
> @@ -38,6 +38,12 @@ struct cdns3_role_driver { };
>
> #define CDNS3_XHCI_RESOURCES_NUM 2
> +
> +struct cdns3_platform_data {
> + int (*platform_suspend)(struct device *dev,
> + bool suspend, bool wakeup);
> +};
> +
> /**
> * struct cdns3 - Representation of Cadence USB3 DRD controller.
> * @dev: pointer to Cadence device struct @@ -62,6 +68,10 @@ struct
> cdns3_role_driver {
> * This field based on firmware setting, kernel configuration
> * and hardware configuration.
> * @role_sw: pointer to role switch object.
> + * @in_lpm: indicate the controller is in low power mode
> + * @wakeup_int: wakeup interrupt occurs
> + * @pdata: platform data from glue layer
> + * @lock: spinlock structure
> */
> struct cdns3 {
> struct device *dev;
> @@ -89,6 +99,10 @@ struct cdns3 {
> struct mutex mutex;
> enum usb_dr_mode dr_mode;
> struct usb_role_switch *role_sw;
> + bool in_lpm;
> + bool wakeup_int;
> + struct cdns3_platform_data *pdata;
> + spinlock_t lock;
> };
>
> int cdns3_hw_role_switch(struct cdns3 *cdns); diff --git
> a/drivers/usb/cdns3/drd.c b/drivers/usb/cdns3/drd.c index
> 58089841ed52..292ea248c0ec 100644
> --- a/drivers/usb/cdns3/drd.c
> +++ b/drivers/usb/cdns3/drd.c
> @@ -278,6 +278,13 @@ static irqreturn_t cdns3_drd_irq(int irq, void *data)
> struct cdns3 *cdns = data;
> u32 reg;
>
> + if (cdns->in_lpm) {
> + disable_irq_nosync(irq);
> + cdns->wakeup_int = true;
> + pm_runtime_get(cdns->dev);
> + return IRQ_HANDLED;
> + }
All low power events go through otg irq?
Li Jun
> +
> if (cdns->dr_mode != USB_DR_MODE_OTG)
> return ret;
>
> diff --git a/drivers/usb/cdns3/gadget.c b/drivers/usb/cdns3/gadget.c index
> 559e5c01c2b0..ccb257d9daa6 100644
> --- a/drivers/usb/cdns3/gadget.c
> +++ b/drivers/usb/cdns3/gadget.c
> @@ -1766,9 +1766,13 @@ static void cdns3_check_usb_interrupt_proceed(struct
> cdns3_device *priv_dev, static irqreturn_t cdns3_device_irq_handler(int irq,
> void *data) {
> struct cdns3_device *priv_dev = data;
> + struct cdns3 *cdns = dev_get_drvdata(priv_dev->dev);
> irqreturn_t ret = IRQ_NONE;
> u32 reg;
>
> + if (cdns->in_lpm)
> + return ret;
> +
> /* check USB device interrupt */
> reg = readl(&priv_dev->regs->usb_ists);
> if (reg) {
> diff --git a/drivers/usb/cdns3/host.c b/drivers/usb/cdns3/host.c index
> ad788bf3fe4f..b579ef15f4e0 100644
> --- a/drivers/usb/cdns3/host.c
> +++ b/drivers/usb/cdns3/host.c
> @@ -13,11 +13,13 @@
> #include "core.h"
> #include "drd.h"
> #include "host-export.h"
> +#include <linux/usb/hcd.h>
>
> static int __cdns3_host_init(struct cdns3 *cdns) {
> struct platform_device *xhci;
> int ret;
> + struct usb_hcd *hcd;
>
> cdns3_drd_switch_host(cdns, 1);
>
> @@ -43,6 +45,11 @@ static int __cdns3_host_init(struct cdns3 *cdns)
> goto err1;
> }
>
> + /* Glue needs to access xHCI region register for Power management */
> + hcd = platform_get_drvdata(xhci);
> + if (hcd)
> + cdns->xhci_regs = hcd->regs;
> +
> return 0;
> err1:
> platform_device_put(xhci);
> --
> 2.17.1
next prev parent reply other threads:[~2020-05-24 6:04 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-05-23 23:22 [PATCH v2 0/9] usb: some PM changes for cdns3 and xhci-plat Peter Chen
2020-05-23 23:22 ` [PATCH v2 1/9] usb: cdns3: introduce cdns3_set_phy_power API Peter Chen
2020-05-24 5:56 ` Jun Li
2020-05-23 23:22 ` [PATCH v2 2/9] usb: cdns3: add runtime PM support Peter Chen
2020-05-24 5:57 ` Jun Li [this message]
2020-05-24 6:43 ` Jun Li
2020-05-25 2:57 ` Peter Chen
2020-05-25 12:23 ` Jun Li
2020-05-26 2:03 ` Peter Chen
2020-06-03 8:51 ` Chunfeng Yun
2020-06-03 9:27 ` Peter Chen
2020-05-23 23:22 ` [PATCH v2 3/9] usb: cdns3: imx: add glue layer runtime pm implementation Peter Chen
2020-05-24 6:55 ` Jun Li
2020-05-25 2:59 ` Peter Chen
2020-05-25 4:53 ` kbuild test robot
2020-05-25 6:31 ` Peter Chen
2020-05-25 8:25 ` kbuild test robot
2020-05-23 23:22 ` [PATCH v2 4/9] usb: host: xhci-plat: add platform data support Peter Chen
2020-05-29 10:21 ` Mathias Nyman
2020-05-23 23:23 ` [PATCH v2 5/9] usb: host: xhci-plat: add .suspend_quirk for struct xhci_plat_priv Peter Chen
2020-05-29 10:22 ` Mathias Nyman
2020-05-23 23:23 ` [PATCH v2 6/9] usb: host: xhci-plat: delete the unnecessary code Peter Chen
2020-05-24 7:40 ` Jun Li
2020-05-29 10:23 ` Mathias Nyman
2020-05-23 23:23 ` [PATCH v2 7/9] usb: host: xhci-plat: add priv flag for skip_phy_initialization Peter Chen
2020-05-24 7:40 ` Jun Li
2020-05-25 3:03 ` Peter Chen
2020-05-25 12:30 ` Jun Li
2020-05-26 0:26 ` Peter Chen
2020-05-29 13:10 ` Mathias Nyman
2020-05-29 13:15 ` Peter Chen
2020-05-23 23:23 ` [PATCH v2 8/9] usb: cdns3: host: add .suspend_quirk for xhci-plat.c Peter Chen
2020-05-23 23:23 ` [PATCH v2 9/9] usb: cdns3: host: add xhci_plat_priv's flag skip_phy_initialization Peter Chen
2020-05-29 7:22 ` [PATCH v2 0/9] usb: some PM changes for cdns3 and xhci-plat Peter Chen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=VE1PR04MB652836D56801C440F3E3928689B20@VE1PR04MB6528.eurprd04.prod.outlook.com \
--to=jun.li@nxp.com \
--cc=balbi@kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=linux-imx@nxp.com \
--cc=linux-usb@vger.kernel.org \
--cc=mathias.nyman@intel.com \
--cc=pawell@cadence.com \
--cc=peter.chen@nxp.com \
--cc=rogerq@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).