Re: [PATCH 1/2] watchdog: pm8916_wdt: fix pretimeout registration flow

[Guenter Roeck <linux@roeck-us.net>]

On Fri, Sep 06, 2019 at 10:30:53PM +0200, Jorge Ramirez-Ortiz wrote:
> When an IRQ is present in the dts, the probe function shall fail if
> the interrupt can not be registered.
> 
> The probe function shall also be retried if getting the irq is being
> deferred.
> 
> Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
> Reviewed-by: Loic Poulain <loic.poulain@linaro.org>

Reviewed-by: Guenter Roeck <linux@roeck-us.net>

with nitpick below.

> ---
>  drivers/watchdog/pm8916_wdt.c | 16 ++++++++++++----
>  1 file changed, 12 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/watchdog/pm8916_wdt.c b/drivers/watchdog/pm8916_wdt.c
> index 2d3652004e39..cb5304c26ac3 100644
> --- a/drivers/watchdog/pm8916_wdt.c
> +++ b/drivers/watchdog/pm8916_wdt.c
> @@ -163,9 +163,18 @@ static int pm8916_wdt_probe(struct platform_device *pdev)
>  
>  	irq = platform_get_irq(pdev, 0);
>  	if (irq > 0) {
> -		if (devm_request_irq(dev, irq, pm8916_wdt_isr, 0, "pm8916_wdt",
> -				     wdt))
> -			irq = 0;
> +		err = devm_request_irq(dev, irq, pm8916_wdt_isr, 0,
> +				       "pm8916_wdt", wdt);
> +		if (err)
> +			return err;
> +
> +		wdt->wdev.info = &pm8916_wdt_pt_ident;
> +

Unnecessary empty line.

> +	} else {
> +		if (irq == -EPROBE_DEFER)
> +			return -EPROBE_DEFER;
> +
> +		wdt->wdev.info = &pm8916_wdt_ident;
>  	}
>  
>  	/* Configure watchdog to hard-reset mode */
> @@ -177,7 +186,6 @@ static int pm8916_wdt_probe(struct platform_device *pdev)
>  		return err;
>  	}
>  
> -	wdt->wdev.info = (irq > 0) ? &pm8916_wdt_pt_ident : &pm8916_wdt_ident,
>  	wdt->wdev.ops = &pm8916_wdt_ops,
>  	wdt->wdev.parent = dev;
>  	wdt->wdev.min_timeout = PM8916_WDT_MIN_TIMEOUT;