[PATCH 1/2] watchdog: bd70528: don't crash if WDG is confiured with BD71828

[Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>]

If config for BD70528 watchdog is enabled when BD71828 or BD71815
are used the RTC module will issue call to BD70528 watchdog with
NULL data. Ignore this call and don't crash.

Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
---
 drivers/watchdog/bd70528_wdt.c | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/drivers/watchdog/bd70528_wdt.c b/drivers/watchdog/bd70528_wdt.c
index 0170b37e6674..fde242b8a4a6 100644
--- a/drivers/watchdog/bd70528_wdt.c
+++ b/drivers/watchdog/bd70528_wdt.c
@@ -49,6 +49,21 @@ int bd70528_wdt_set(struct rohm_regmap_dev *data, int enable, int *old_state)
 	u8 wd_ctrl_arr[3] = { WD_CTRL_MAGIC1, WD_CTRL_MAGIC2, 0 };
 	u8 *wd_ctrl = &wd_ctrl_arr[2];
 
+	/*
+	 * BD71828 and BD71815 use same RTC driver as BD70528.
+	 * BD71815 and BD71828 do not need MFD data as they do not share
+	 * RTC counter with watchdog. The BD70528 watchdog should not be
+	 * compiled in with BD71815 or BD71828 and the stub implementation
+	 * for the bd70528_wdt_set should be provided instead.
+	 *
+	 * If one compiles this watchdog with BD71828 or BD71815 - the call
+	 * from RTC may get here and the data pointer is NULL. In that case,
+	 * warn and go out.
+	 */
+	if (!data) {
+		pr_warn("BD70528_WATCHDOG misconfigured\n");
+		return 0;
+	}
 	ret = regmap_read(bd70528->chip.regmap, BD70528_REG_WDT_CTRL, &tmp);
 	if (ret)
 		return ret;

base-commit: 2c85ebc57b3e1817b6ce1a6b703928e113a90442
-- 
2.25.4


-- 
Matti Vaittinen, Linux device drivers
ROHM Semiconductors, Finland SWDC
Kiviharjunlenkki 1E
90220 OULU
FINLAND

~~~ "I don't think so," said Rene Descartes. Just then he vanished ~~~
Simon says - in Latin please.
~~~ "non cogito me" dixit Rene Descarte, deinde evanescavit ~~~
Thanks to Simon Glass for the translation =]