RE: [PATCH RESEND V6 1/3] watchdog: imx_sc: Add i.MX system controller watchdog support

[Anson Huang <anson.huang@nxp.com>]

Hi, Guenter

Best Regards!
Anson Huang

> -----Original Message-----
> From: Guenter Roeck [mailto:groeck7@gmail.com] On Behalf Of Guenter
> Roeck
> Sent: 2019年3月5日 22:07
> To: Anson Huang <anson.huang@nxp.com>; catalin.marinas@arm.com;
> will.deacon@arm.com; shawnguo@kernel.org; s.hauer@pengutronix.de;
> kernel@pengutronix.de; festevam@gmail.com; wim@linux-watchdog.org;
> Andy Gross <andy.gross@linaro.org>; heiko@sntech.de; arnd@arndb.de;
> horms+renesas@verge.net.au; bjorn.andersson@linaro.org;
> jagan@amarulasolutions.com; enric.balletbo@collabora.com;
> marc.w.gonzalez@free.fr; olof@lixom.net; Aisheng Dong
> <aisheng.dong@nxp.com>; linux-arm-kernel@lists.infradead.org; linux-
> kernel@vger.kernel.org; linux-watchdog@vger.kernel.org
> Cc: dl-linux-imx <linux-imx@nxp.com>
> Subject: Re: [PATCH RESEND V6 1/3] watchdog: imx_sc: Add i.MX system
> controller watchdog support
> 
> On 3/4/19 7:37 PM, Anson Huang wrote:
> > i.MX8QXP is an ARMv8 SoC which has a Cortex-M4 system controller
> > inside, the system controller is in charge of controlling power, clock
> > and watchdog etc..
> >
> > This patch adds i.MX system controller watchdog driver support,
> > watchdog operation needs to be done in secure EL3 mode via
> > ARM-Trusted-Firmware, using SMC call, CPU will trap into
> > ARM-Trusted-Firmware and then it will request system controller to do
> > watchdog operation via IPC.
> >
> > Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
> > ---
> > Changes since V5:
> > 	- move the watchdog platform device register to SCU driver probe, be
> child device of
> > 	  SCU device.
> > ---
> >   drivers/watchdog/Kconfig      |  14 ++++
> >   drivers/watchdog/Makefile     |   1 +
> >   drivers/watchdog/imx_sc_wdt.c | 185
> ++++++++++++++++++++++++++++++++++++++++++
> >   3 files changed, 200 insertions(+)
> >   create mode 100644 drivers/watchdog/imx_sc_wdt.c
> >
> > diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig index
> > 242eea8..33a6523 100644
> > --- a/drivers/watchdog/Kconfig
> > +++ b/drivers/watchdog/Kconfig
> > @@ -641,6 +641,20 @@ config IMX2_WDT
> >   	  To compile this driver as a module, choose M here: the
> >   	  module will be called imx2_wdt.
> >
> > +config IMX_SC_WDT
> > +	tristate "IMX SC Watchdog"
> > +	depends on IMX_SCU
> > +	depends on HAVE_ARM_SMCCC
> > +	select WATCHDOG_CORE
> > +	help
> > +	  This is the driver for the system controller watchdog
> > +	  on the NXP i.MX SoCs with system controller inside.
> > +	  If you have one of these processors and wish to have
> > +	  watchdog support enabled, say Y, otherwise say N.
> > +
> > +	  To compile this driver as a module, choose M here: the
> > +	  module will be called imx_sc_wdt.
> > +
> >   config UX500_WATCHDOG
> >   	tristate "ST-Ericsson Ux500 watchdog"
> >   	depends on MFD_DB8500_PRCMU
> > diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
> > index ba930e4..136d9f0 100644
> > --- a/drivers/watchdog/Makefile
> > +++ b/drivers/watchdog/Makefile
> > @@ -68,6 +68,7 @@ obj-$(CONFIG_NUC900_WATCHDOG) +=
> nuc900_wdt.o
> >   obj-$(CONFIG_TS4800_WATCHDOG) += ts4800_wdt.o
> >   obj-$(CONFIG_TS72XX_WATCHDOG) += ts72xx_wdt.o
> >   obj-$(CONFIG_IMX2_WDT) += imx2_wdt.o
> > +obj-$(CONFIG_IMX_SC_WDT) += imx_sc_wdt.o
> >   obj-$(CONFIG_UX500_WATCHDOG) += ux500_wdt.o
> >   obj-$(CONFIG_RETU_WATCHDOG) += retu_wdt.o
> >   obj-$(CONFIG_BCM2835_WDT) += bcm2835_wdt.o diff --git
> > a/drivers/watchdog/imx_sc_wdt.c b/drivers/watchdog/imx_sc_wdt.c new
> > file mode 100644 index 0000000..2645203
> > --- /dev/null
> > +++ b/drivers/watchdog/imx_sc_wdt.c
> > @@ -0,0 +1,185 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +/*
> > + * Copyright 2018-2019 NXP.
> > + */
> > +
> > +#include <linux/arm-smccc.h>
> > +#include <linux/io.h>
> > +#include <linux/init.h>
> > +#include <linux/kernel.h>
> > +#include <linux/module.h>
> > +#include <linux/moduleparam.h>
> > +#include <linux/platform_device.h>
> > +#include <linux/reboot.h>
> > +#include <linux/watchdog.h>
> > +
> > +#define DEFAULT_TIMEOUT 60
> > +/*
> > + * Software timer tick implemented in scfw side, support 10ms to
> > +0xffffffff ms
> > + * in theory, but for normal case, 1s~128s is enough, you can change
> > +this max
> > + * value in case it's not enough.
> > + */
> > +#define MAX_TIMEOUT 128
> > +
> > +#define IMX_SIP_TIMER			0xC2000002
> > +#define IMX_SIP_TIMER_START_WDOG		0x01
> > +#define IMX_SIP_TIMER_STOP_WDOG		0x02
> > +#define IMX_SIP_TIMER_SET_WDOG_ACT	0x03
> > +#define IMX_SIP_TIMER_PING_WDOG		0x04
> > +#define IMX_SIP_TIMER_SET_TIMEOUT_WDOG	0x05
> > +#define IMX_SIP_TIMER_GET_WDOG_STAT	0x06
> > +#define IMX_SIP_TIMER_SET_PRETIME_WDOG	0x07
> > +
> > +#define SC_TIMER_WDOG_ACTION_PARTITION	0
> > +
> > +static bool nowayout = WATCHDOG_NOWAYOUT;
> module_param(nowayout,
> > +bool, 0000); MODULE_PARM_DESC(nowayout, "Watchdog cannot be
> stopped
> > +once started (default="
> > +		 __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
> > +
> > +static unsigned int timeout = DEFAULT_TIMEOUT; module_param(timeout,
> > +uint, 0000); MODULE_PARM_DESC(timeout, "Watchdog timeout in
> seconds
> > +(default="
> > +		 __MODULE_STRING(DEFAULT_TIMEOUT) ")");
> > +
> > +static int imx_sc_wdt_ping(struct watchdog_device *wdog) {
> > +	struct arm_smccc_res res;
> > +
> > +	arm_smccc_smc(IMX_SIP_TIMER, IMX_SIP_TIMER_PING_WDOG,
> > +		      0, 0, 0, 0, 0, 0, &res);
> > +
> > +	return 0;
> > +}
> > +
> > +static int imx_sc_wdt_start(struct watchdog_device *wdog) {
> > +	struct arm_smccc_res res;
> > +
> > +	arm_smccc_smc(IMX_SIP_TIMER, IMX_SIP_TIMER_START_WDOG,
> > +		      0, 0, 0, 0, 0, 0, &res);
> > +	if (res.a0)
> > +		return -EACCES;
> > +
> > +	arm_smccc_smc(IMX_SIP_TIMER, IMX_SIP_TIMER_SET_WDOG_ACT,
> > +		      SC_TIMER_WDOG_ACTION_PARTITION,
> > +		      0, 0, 0, 0, 0, &res);
> > +	return res.a0 ? -EACCES : 0;
> > +}
> > +
> > +static int imx_sc_wdt_stop(struct watchdog_device *wdog) {
> > +	struct arm_smccc_res res;
> > +
> > +	arm_smccc_smc(IMX_SIP_TIMER, IMX_SIP_TIMER_STOP_WDOG,
> > +		      0, 0, 0, 0, 0, 0, &res);
> > +
> > +	return res.a0 ? -EACCES : 0;
> > +}
> > +
> > +static int imx_sc_wdt_set_timeout(struct watchdog_device *wdog,
> > +				unsigned int timeout)
> > +{
> > +	struct arm_smccc_res res;
> > +
> > +	wdog->timeout = timeout;
> > +	arm_smccc_smc(IMX_SIP_TIMER,
> IMX_SIP_TIMER_SET_TIMEOUT_WDOG,
> > +		      timeout * 1000, 0, 0, 0, 0, 0, &res);
> > +
> > +	return res.a0 ? -EACCES : 0;
> > +}
> > +
> > +static const struct watchdog_ops imx_sc_wdt_ops = {
> > +	.owner = THIS_MODULE,
> > +	.start = imx_sc_wdt_start,
> > +	.stop  = imx_sc_wdt_stop,
> > +	.ping  = imx_sc_wdt_ping,
> > +	.set_timeout = imx_sc_wdt_set_timeout, };
> > +
> > +static const struct watchdog_info imx_sc_wdt_info = {
> > +	.identity	= "i.MX SC watchdog timer",
> > +	.options	= WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING |
> > +			  WDIOF_MAGICCLOSE | WDIOF_PRETIMEOUT, };
> > +
> > +static int imx_sc_wdt_probe(struct platform_device *pdev) {
> > +	struct watchdog_device *imx_sc_wdd;
> > +	int ret;
> > +
> > +	imx_sc_wdd = devm_kzalloc(&pdev->dev, sizeof(*imx_sc_wdd),
> GFP_KERNEL);
> > +	if (!imx_sc_wdd)
> > +		return -ENOMEM;
> > +
> > +	platform_set_drvdata(pdev, imx_sc_wdd);
> > +
> > +	imx_sc_wdd->info = &imx_sc_wdt_info;
> > +	imx_sc_wdd->ops = &imx_sc_wdt_ops;
> > +	imx_sc_wdd->min_timeout = 1;
> > +	imx_sc_wdd->max_timeout = MAX_TIMEOUT;
> > +	imx_sc_wdd->parent = &pdev->dev;
> > +	imx_sc_wdd->timeout = DEFAULT_TIMEOUT;
> > +
> > +	ret = watchdog_init_timeout(imx_sc_wdd, timeout, &pdev->dev);
> > +	if (ret)
> > +		dev_warn(&pdev->dev, "Failed to set timeout value, using
> > +default\n");
> > +
> > +	watchdog_stop_on_reboot(imx_sc_wdd);
> > +	watchdog_stop_on_unregister(imx_sc_wdd);
> > +
> > +	ret = devm_watchdog_register_device(&pdev->dev, imx_sc_wdd);
> > +	if (ret) {
> > +		dev_err(&pdev->dev, "Failed to register watchdog device\n");
> > +		return ret;
> > +	}
> > +
> > +	return 0;
> > +}
> > +
> > +static int __maybe_unused imx_sc_wdt_suspend(struct device *dev) {
> > +	struct watchdog_device *imx_sc_wdd = dev_get_drvdata(dev);
> > +
> > +	if (watchdog_active(imx_sc_wdd))
> > +		imx_sc_wdt_stop(imx_sc_wdd);
> > +
> > +	return 0;
> > +}
> > +
> > +static int __maybe_unused imx_sc_wdt_resume(struct device *dev) {
> > +	struct watchdog_device *imx_sc_wdd = dev_get_drvdata(dev);
> > +
> > +	if (watchdog_active(imx_sc_wdd))
> > +		imx_sc_wdt_start(imx_sc_wdd);
> > +
> > +	return 0;
> > +}
> > +
> > +static SIMPLE_DEV_PM_OPS(imx_sc_wdt_pm_ops,
> > +			 imx_sc_wdt_suspend, imx_sc_wdt_resume);
> > +
> > +static struct platform_driver imx_sc_wdt_driver = {
> > +	.probe		= imx_sc_wdt_probe,
> > +	.driver		= {
> > +		.name	= "imx-sc-wdt",
> > +		.pm	= &imx_sc_wdt_pm_ops,
> > +	},
> > +};
> > +
> > +static int __init imx_sc_wdt_init(void) {
> > +	return platform_driver_register(&imx_sc_wdt_driver);
> > +}
> > +module_init(imx_sc_wdt_init);
> > +
> > +static void __exit imx_sc_wdt_exit(void) {
> > +	platform_driver_unregister(&imx_sc_wdt_driver);
> > +}
> > +module_exit(imx_sc_wdt_exit);
> > +
> 
> module_platform_driver ?

Ah, yes, I forgot it can be as simple as previous patch if we ONLY need
to register platform driver. Thanks for reminder, will fix it in V7.

Anson.

> 
> Guenter
> 
> > +MODULE_AUTHOR("Robin Gong <yibin.gong@nxp.com>");
> > +MODULE_DESCRIPTION("NXP i.MX system controller watchdog driver");
> > +MODULE_LICENSE("GPL v2");
> >