From: Ivan Mikhaylov <i.mikhaylov@yadro.com>
To: Guenter Roeck <linux@roeck-us.net>,
Wim Van Sebroeck <wim@linux-watchdog.org>
Cc: Joel Stanley <joel@jms.id.au>, Andrew Jeffery <andrew@aj.id.au>,
<linux-watchdog@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-aspeed@lists.ozlabs.org>, <linux-kernel@vger.kernel.org>,
"Alexander Amelkin" <a.amelkin@yadro.com>,
<openbmc@lists.ozlabs.org>
Subject: [PATCH v1 0/3] add dual-boot support
Date: Fri, 23 Aug 2019 12:31:03 +0300 [thread overview]
Message-ID: <b79f8d93f67998783c4fd937eac1a488a46c2c9e.camel@yadro.com> (raw)
ASPEED SoCs support dual-boot feature for SPI Flash.
When strapped appropriately, the SoC starts wdt2 (/dev/watchdog1)
and if within a minute it is not disabled, it goes off and reboots
the SoC from an alternate SPI Flash chip by changing CS0 controls
to actually drive CS1 line.
When booted from alternate chip, in order to access the main chip
at CS0, the user must reset the appropriate bit in the watchdog
hardware. There is no interface that would allow to do that from
an embedded firmware startup script.
This commit implements support for that feature:
* Enable 'alt-boot' option for wdt2
* Enable secondary SPI flash chip
* Make it possible to get access to the primary SPI flash chip at CS0
after booting from the alternate chip at CS1. A sysfs interface is added
to provide an easy way for embedded firmware startup scripts to clear
the chip select bit to gain access to the primary flash chip in order
to allow for recovery of its contents.
Ivan Mikhaylov (3):
vesnin: add wdt2 section with alt-boot option
vesnin: add secondary SPI flash chip
watchdog/aspeed: add support for dual boot
arch/arm/boot/dts/aspeed-bmc-opp-vesnin.dts | 12 +++++++++
drivers/watchdog/aspeed_wdt.c | 30 +++++++++++++++++++++
2 files changed, 42 insertions(+)
--
2.20.1
reply other threads:[~2019-08-23 9:31 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=b79f8d93f67998783c4fd937eac1a488a46c2c9e.camel@yadro.com \
--to=i.mikhaylov@yadro.com \
--cc=a.amelkin@yadro.com \
--cc=andrew@aj.id.au \
--cc=joel@jms.id.au \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-aspeed@lists.ozlabs.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-watchdog@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=openbmc@lists.ozlabs.org \
--cc=wim@linux-watchdog.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).