From: Javier Cardona <javier@cozybit.com>
To: linux-wireless@vger.kernel.org
Cc: Javier Cardona <javier@cozybit.com>,
andrey@cozybit.com, johannes@sipsolutions.net,
linville@tuxdriver.com, devel@lists.open80211s.org
Subject: [PATCH 6/8] mac80211: Early detection of broken mesh paths when using minstrel.
Date: Fri, 7 Aug 2009 20:38:29 -0700 [thread overview]
Message-ID: <1249702711-32737-7-git-send-email-javier@cozybit.com> (raw)
In-Reply-To: <1249702711-32737-6-git-send-email-javier@cozybit.com>
Signed-off-by: Javier Cardona <javier@cozybit.com>
---
net/mac80211/mesh_hwmp.c | 1 -
net/mac80211/rc80211_minstrel.c | 8 +++++++-
2 files changed, 7 insertions(+), 2 deletions(-)
diff --git a/net/mac80211/mesh_hwmp.c b/net/mac80211/mesh_hwmp.c
index b4309b2..1cd1e72 100644
--- a/net/mac80211/mesh_hwmp.c
+++ b/net/mac80211/mesh_hwmp.c
@@ -272,7 +272,6 @@ static u32 hwmp_route_info_get(struct ieee80211_sub_if_data *sdata,
}
last_hop_metric = airtime_link_metric_get(local, sta);
- printk("XXX: last_hop_metric = %d\n", last_hop_metric);
/* Update and check originator routing info */
fresh_info = true;
diff --git a/net/mac80211/rc80211_minstrel.c b/net/mac80211/rc80211_minstrel.c
index 3ea9740..0071649 100644
--- a/net/mac80211/rc80211_minstrel.c
+++ b/net/mac80211/rc80211_minstrel.c
@@ -51,6 +51,7 @@
#include <linux/random.h>
#include <linux/ieee80211.h>
#include <net/mac80211.h>
+#include "mesh.h"
#include "rate.h"
#include "rc80211_minstrel.h"
@@ -178,9 +179,14 @@ minstrel_tx_status(void *priv, struct ieee80211_supported_band *sband,
if ((i != IEEE80211_TX_MAX_RATES - 1) && (ar[i + 1].idx < 0)) {
mi->r[ndx].success += success;
- if (si)
+ if (si) {
si->fail_avg = (18050 - mi->r[ndx].probability)
/ 180;
+ WARN_ON(si->fail_avg > 100);
+ if (si->fail_avg == 100 &&
+ ieee80211_vif_is_mesh(&si->sdata->vif))
+ mesh_plink_broken(si);
+ }
}
}
--
1.5.4.3
next prev parent reply other threads:[~2009-08-08 3:50 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-08-08 3:38 Mesh fixes and improvements Javier Cardona
2009-08-08 3:38 ` [PATCH 1/8] mac80211: Improve dequeing from mpath frame queue Javier Cardona
2009-08-08 3:38 ` [PATCH 2/8] mac80211: Use correct sign for mesh active path refresh Javier Cardona
2009-08-08 3:38 ` [PATCH 3/8] mac80211: Simulate transmission losses on plinks to aid in testing mesh metrics Javier Cardona
2009-08-08 3:38 ` [PATCH 4/8] mac80211: Use 3-address format for mesh broadcast frames Javier Cardona
2009-08-08 3:38 ` [PATCH 5/8] mac80211: Update the station failed frames average when minstrel is used Javier Cardona
2009-08-08 3:38 ` Javier Cardona [this message]
2009-08-08 3:38 ` [PATCH 7/8] mac80211: Assign a default mesh beaconing interval Javier Cardona
2009-08-08 3:38 ` [PATCH 8/8] mac80211: Moved mpath and mpp growth to mesh workqueue Javier Cardona
2009-08-08 8:09 ` [PATCH 3/8] mac80211: Simulate transmission losses on plinks to aid in testing mesh metrics Kalle Valo
2009-08-08 8:46 ` Johannes Berg
2009-08-08 9:09 ` Mesh fixes and improvements Johannes Berg
2009-08-09 4:55 ` Javier Cardona
2009-08-10 17:52 ` John W. Linville
2009-08-10 19:15 ` Mesh fixes and improvements [v2] Javier Cardona
2009-08-10 19:15 ` [PATCH 1/7] mac80211: Improve dequeing from mpath frame queue Javier Cardona
2009-08-10 19:15 ` [PATCH 2/7] mac80211: Use correct sign for mesh active path refresh Javier Cardona
2009-08-10 19:15 ` [PATCH 3/7] mac80211: Use 3-address format for mesh broadcast frames Javier Cardona
2009-08-10 19:15 ` [PATCH 4/7] mac80211: Update the station failed frames average when minstrel is used Javier Cardona
2009-08-10 19:15 ` [PATCH 5/7] mac80211: Early detection of broken mesh paths when using minstrel Javier Cardona
2009-08-10 19:15 ` [PATCH 6/7] mac80211: Assign a default mesh beaconing interval Javier Cardona
2009-08-10 19:15 ` [PATCH 7/7] mac80211: Move mpath and mpp growth to mesh workqueue Javier Cardona
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1249702711-32737-7-git-send-email-javier@cozybit.com \
--to=javier@cozybit.com \
--cc=andrey@cozybit.com \
--cc=devel@lists.open80211s.org \
--cc=johannes@sipsolutions.net \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).