From: "Luis R. Rodriguez" <lrodriguez@atheros.com>
To: linville@tuxdriver.com
Cc: linux-wireless@vger.kernel.org,
"Luis R. Rodriguez" <lrodriguez@atheros.com>
Subject: [PATCH v2 19/25] wireless: organize individual drivers alphabetically
Date: Thu, 13 Aug 2009 20:42:58 -0400 [thread overview]
Message-ID: <1250210584-13374-20-git-send-email-lrodriguez@atheros.com> (raw)
In-Reply-To: <1250210584-13374-1-git-send-email-lrodriguez@atheros.com>
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
---
drivers/net/wireless/Kconfig | 95 +++++++++++++++++++++---------------------
1 files changed, 47 insertions(+), 48 deletions(-)
diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig
index 59e4664..45e9cf2 100644
--- a/drivers/net/wireless/Kconfig
+++ b/drivers/net/wireless/Kconfig
@@ -14,30 +14,6 @@ menuconfig WLAN_PRE80211
This option does not affect the kernel build, it only
lets you choose drivers.
-config STRIP
- tristate "STRIP (Metricom starmode radio IP)"
- depends on INET && WLAN_PRE80211
- select WIRELESS_EXT
- ---help---
- Say Y if you have a Metricom radio and intend to use Starmode Radio
- IP. STRIP is a radio protocol developed for the MosquitoNet project
- (on the WWW at <http://mosquitonet.stanford.edu/>) to send Internet
- traffic using Metricom radios. Metricom radios are small, battery
- powered, 100kbit/sec packet radio transceivers, about the size and
- weight of a cellular telephone. (You may also have heard them called
- "Metricom modems" but we avoid the term "modem" because it misleads
- many people into thinking that you can plug a Metricom modem into a
- phone line and use it as a modem.)
-
- You can use STRIP on any Linux machine with a serial port, although
- it is obviously most useful for people with laptop computers. If you
- think you might get a Metricom radio in the future, there is no harm
- in saying Y to STRIP now, except that it makes the kernel a bit
- bigger.
-
- To compile this as a module, choose M here: the module will be
- called strip.
-
config ARLAN
tristate "Aironet Arlan 655 & IC2200 DS support"
depends on ISA && !64BIT && WLAN_PRE80211
@@ -89,6 +65,30 @@ config PCMCIA_WAVELAN
To compile this driver as a module, choose M here: the module will be
called wavelan_cs. If unsure, say N.
+config STRIP
+ tristate "STRIP (Metricom starmode radio IP)"
+ depends on INET && WLAN_PRE80211
+ select WIRELESS_EXT
+ ---help---
+ Say Y if you have a Metricom radio and intend to use Starmode Radio
+ IP. STRIP is a radio protocol developed for the MosquitoNet project
+ (on the WWW at <http://mosquitonet.stanford.edu/>) to send Internet
+ traffic using Metricom radios. Metricom radios are small, battery
+ powered, 100kbit/sec packet radio transceivers, about the size and
+ weight of a cellular telephone. (You may also have heard them called
+ "Metricom modems" but we avoid the term "modem" because it misleads
+ many people into thinking that you can plug a Metricom modem into a
+ phone line and use it as a modem.)
+
+ You can use STRIP on any Linux machine with a serial port, although
+ it is obviously most useful for people with laptop computers. If you
+ think you might get a Metricom radio in the future, there is no harm
+ in saying Y to STRIP now, except that it makes the kernel a bit
+ bigger.
+
+ To compile this as a module, choose M here: the module will be
+ called strip.
+
config PCMCIA_NETWAVE
tristate "Xircom Netwave AirSurfer Pcmcia wireless support"
depends on PCMCIA && WLAN_PRE80211
@@ -100,7 +100,6 @@ config PCMCIA_NETWAVE
To compile this driver as a module, choose M here: the module will be
called netwave_cs. If unsure, say N.
-
menuconfig WLAN_80211
bool "Wireless LAN (IEEE 802.11)"
depends on NETDEVICES
@@ -509,28 +508,6 @@ config USB_ZD1201
endif # ZYDAS_80211
-config PCMCIA_RAYCS
- tristate "Aviator/Raytheon 2.4GHz wireless support"
- depends on PCMCIA && WLAN_80211
- select WIRELESS_EXT
- ---help---
- Say Y here if you intend to attach an Aviator/Raytheon PCMCIA
- (PC-card) wireless Ethernet networking card to your computer.
- Please read the file <file:Documentation/networking/ray_cs.txt> for
- details.
-
- To compile this driver as a module, choose M here: the module will be
- called ray_cs. If unsure, say N.
-
-config PCMCIA_WL3501
- tristate "Planet WL3501 PCMCIA cards"
- depends on EXPERIMENTAL && PCMCIA && WLAN_80211
- select WIRELESS_EXT
- ---help---
- A driver for WL3501 PCMCIA 802.11 wireless cards made by Planet.
- It has basic support for Linux wireless extensions and initial
- micro support for ethtool.
-
config ADM8211
tristate "ADMtek ADM8211 support"
depends on MAC80211 && PCI && WLAN_80211 && EXPERIMENTAL
@@ -558,8 +535,30 @@ config ADM8211
Thanks to Infineon-ADMtek for their support of this driver.
-source "drivers/net/wireless/hostap/Kconfig"
+config PCMCIA_RAYCS
+ tristate "Aviator/Raytheon 2.4GHz wireless support"
+ depends on PCMCIA && WLAN_80211
+ select WIRELESS_EXT
+ ---help---
+ Say Y here if you intend to attach an Aviator/Raytheon PCMCIA
+ (PC-card) wireless Ethernet networking card to your computer.
+ Please read the file <file:Documentation/networking/ray_cs.txt> for
+ details.
+
+ To compile this driver as a module, choose M here: the module will be
+ called ray_cs. If unsure, say N.
+
source "drivers/net/wireless/orinoco/Kconfig"
+source "drivers/net/wireless/hostap/Kconfig"
+
+config PCMCIA_WL3501
+ tristate "Planet WL3501 PCMCIA cards"
+ depends on EXPERIMENTAL && PCMCIA && WLAN_80211
+ select WIRELESS_EXT
+ ---help---
+ A driver for WL3501 PCMCIA 802.11 wireless cards made by Planet.
+ It has basic support for Linux wireless extensions and initial
+ micro support for ethtool.
config USB_NET_RNDIS_WLAN
tristate "Wireless RNDIS USB support"
--
1.6.2.5
next prev parent reply other threads:[~2009-08-14 0:43 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-08-14 0:42 [PATCH v2 00/25] wireless: cleanup and reorganize kconfig Luis R. Rodriguez
2009-08-14 0:42 ` [PATCH v2 01/25] wireless: move iwmc3200wifi closer to the other intel drivers Luis R. Rodriguez
2009-08-14 0:42 ` [PATCH v2 02/25] wireless: group intel wireless drivers on kconfig Luis R. Rodriguez
2009-08-14 0:42 ` [PATCH v2 03/25] wireless: move MWL8K right below libertas " Luis R. Rodriguez
2009-08-14 0:42 ` [PATCH v2 05/25] wireless: move p54 and prism54 drivers closer " Luis R. Rodriguez
2009-08-14 0:42 ` [PATCH v2 06/25] wireless: group Conexant / STEricsson drivers in kconfig Luis R. Rodriguez
2009-08-14 0:42 ` [PATCH v2 07/25] wireless: move zd1211rw option closer to old ZyDAS on kconfig Luis R. Rodriguez
2009-08-14 0:42 ` [PATCH v2 08/25] wireless: group ZyDAS wireless drivers in kconfig Luis R. Rodriguez
2009-08-14 0:42 ` [PATCH v2 09/25] wireless: group Realtek wireless on kconfig Luis R. Rodriguez
2009-08-14 0:42 ` [PATCH v2 10/25] wireless: group Broadcom drivers " Luis R. Rodriguez
2009-08-14 0:42 ` [PATCH v2 11/25] wireless: clarify rndis_wlan is not broadcom specific Luis R. Rodriguez
2009-08-14 10:13 ` Gábor Stefanik
2009-08-14 16:07 ` Jussi Kivilinna
2009-08-14 0:42 ` [PATCH v2 12/25] wireless: group Atmel wireless together on kconfig Luis R. Rodriguez
2009-08-14 0:42 ` [PATCH v2 13/25] wireless: move AIRO_CS closer to AIRO_CS Luis R. Rodriguez
2009-08-14 0:42 ` [PATCH v2 14/25] wireless: group Cisco together on kconfig Luis R. Rodriguez
2009-08-14 0:42 ` [PATCH v2 15/25] wireless: move group drivers together Luis R. Rodriguez
2009-08-14 0:42 ` [PATCH v2 16/25] wireless: organize group drivers alphabetically Luis R. Rodriguez
2009-08-14 0:42 ` [PATCH v2 17/25] wireless: remove IEEE 802.11 description on hostapd Luis R. Rodriguez
2009-08-14 0:42 ` [PATCH v2 18/25] wireless: move mac80211_hwsim to top level wireless driver menu Luis R. Rodriguez
2009-08-14 0:42 ` Luis R. Rodriguez [this message]
2009-08-14 0:42 ` [PATCH v2 20/25] wireless: simplify WLAN_PRE80211 entries Luis R. Rodriguez
2009-08-14 0:43 ` [PATCH v2 21/25] wireless: simplify WLAN_80211 entries Luis R. Rodriguez
2009-08-14 0:43 ` [PATCH v2 22/25] wireless: remove "Wireless" from rndis kconfig entry Luis R. Rodriguez
2009-08-14 0:43 ` [PATCH v2 23/25] wireless: downgrade TI driver from menuconfig to config Luis R. Rodriguez
2009-08-14 7:03 ` Luciano Coelho
2009-08-14 0:43 ` [PATCH v2 24/25] wl12xx: be consistent with the other group driver entries Luis R. Rodriguez
2009-08-14 7:07 ` Luciano Coelho
2009-08-14 0:43 ` [PATCH v2 25/25] ath: " Luis R. Rodriguez
2009-08-14 0:47 ` [PATCH v2 00/25] wireless: cleanup and reorganize kconfig Luis R. Rodriguez
2009-08-14 3:33 ` Larry Finger
2009-08-14 3:41 ` Luis R. Rodriguez
2009-08-14 3:49 ` Luis R. Rodriguez
2009-08-14 8:00 ` Holger Schurig
2009-08-14 16:14 ` Luis R. Rodriguez
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1250210584-13374-20-git-send-email-lrodriguez@atheros.com \
--to=lrodriguez@atheros.com \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).