From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from mail-ey0-f174.google.com ([209.85.215.174]:42940 "EHLO mail-ey0-f174.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1758041Ab0HDOS4 (ORCPT ); Wed, 4 Aug 2010 10:18:56 -0400 Received: by mail-ey0-f174.google.com with SMTP id 25so1978184eya.19 for ; Wed, 04 Aug 2010 07:18:56 -0700 (PDT) From: Kshitij Kulshreshtha To: "Luis R. Rodriguez" , Hauke Mehrtens Cc: linux-wireless@vger.kernel.org, Kshitij Kulshreshtha Subject: [PATCH] compat-wireless: more PCMCIA backporting Date: Wed, 4 Aug 2010 16:18:36 +0200 Message-Id: <1280931516-29665-3-git-send-email-kkhere.geo@gmail.com> In-Reply-To: <1280931516-29665-1-git-send-email-kkhere.geo@gmail.com> References: <1280931516-29665-1-git-send-email-kkhere.geo@gmail.com> Sender: linux-wireless-owner@vger.kernel.org List-ID: to fix build, these changes are leftovers from commit commit dedb69815e9608360249e62a794e3dea6a867ab8 Author: Luis R. Rodriguez Date: Tue Aug 3 13:30:01 2010 -0700 compat-wireless: backport and fix new PCMCIA changes Signed-off-by: Kshitij Kulshreshtha --- patches/24-pcmcia.patch | 131 +++++++++++++++++++++++++++++++++++++++++++++-- 1 files changed, 126 insertions(+), 5 deletions(-) diff --git a/patches/24-pcmcia.patch b/patches/24-pcmcia.patch index 9fb0e77..b1d65bf 100644 --- a/patches/24-pcmcia.patch +++ b/patches/24-pcmcia.patch @@ -275,7 +275,56 @@ /* General socket configuration defaults can go here. In this * client, we assume very little, and rely on the CIS for * almost everything. In most clients, many details (i.e., -@@ -248,7 +258,11 @@ orinoco_cs_config(struct pcmcia_device * +@@ -191,23 +201,48 @@ static int orinoco_cs_config_check(struc + p_dev->conf.Attributes |= CONF_ENABLE_IRQ; + + /* IO window settings */ ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,36) + p_dev->resource[0]->end = p_dev->resource[1]->end = 0; ++#else ++ p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0; ++#endif + if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { + cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,36) + p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK; + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= + pcmcia_io_cfg_data_width(io->flags); + p_dev->resource[0]->start = io->win[0].base; + p_dev->resource[0]->end = io->win[0].len; ++#else ++ p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; ++ if (!(io->flags & CISTPL_IO_8BIT)) ++ p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16; ++ if (!(io->flags & CISTPL_IO_16BIT)) ++ p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8; ++ p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK; ++ p_dev->io.BasePort1 = io->win[0].base; ++ p_dev->io.NumPorts1 = io->win[0].len; ++#endif + if (io->nwin > 1) { ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,36) + p_dev->resource[1]->flags = p_dev->resource[0]->flags; + p_dev->resource[1]->start = io->win[1].base; + p_dev->resource[1]->end = io->win[1].len; ++#else ++ p_dev->io.Attributes2 = p_dev->io.Attributes1; ++ p_dev->io.BasePort2 = io->win[1].base; ++ p_dev->io.NumPorts2 = io->win[1].len; ++#endif + } + + /* This reserves IO space but doesn't actually enable it */ ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,36) + if (pcmcia_request_io(p_dev) != 0) ++#else ++ if (pcmcia_request_io(p_dev, &p_dev->io) != 0) ++#endif + goto next_entry; + } + return 0; +@@ -248,15 +283,23 @@ orinoco_cs_config(struct pcmcia_device * goto failed; } @@ -287,7 +336,19 @@ if (ret) goto failed; -@@ -278,8 +292,16 @@ orinoco_cs_config(struct pcmcia_device * + /* We initialize the hermes structure before completing PCMCIA + * configuration just in case the interrupt handler gets + * called. */ ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,36) + mem = ioport_map(link->resource[0]->start, + resource_size(link->resource[0])); ++#else ++ mem = ioport_map(link->io.BasePort1, link->io.NumPorts1); ++#endif + if (!mem) + goto failed; + +@@ -278,8 +321,16 @@ orinoco_cs_config(struct pcmcia_device * } /* Register an interface with the stack */ @@ -319,7 +380,56 @@ /* General socket configuration defaults can go here. In this * client, we assume very little, and rely on the CIS for * almost everything. In most clients, many details (i.e., -@@ -310,7 +316,11 @@ spectrum_cs_config(struct pcmcia_device +@@ -253,23 +259,48 @@ static int spectrum_cs_config_check(stru + p_dev->conf.Attributes |= CONF_ENABLE_IRQ; + + /* IO window settings */ ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,36) + p_dev->resource[0]->end = p_dev->resource[1]->end = 0; ++#else ++ p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0; ++#endif + if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { + cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,36) + p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK; + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= + pcmcia_io_cfg_data_width(io->flags); + p_dev->resource[0]->start = io->win[0].base; + p_dev->resource[0]->end = io->win[0].len; ++#else ++ p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; ++ if (!(io->flags & CISTPL_IO_8BIT)) ++ p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16; ++ if (!(io->flags & CISTPL_IO_16BIT)) ++ p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8; ++ p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK; ++ p_dev->io.BasePort1 = io->win[0].base; ++ p_dev->io.NumPorts1 = io->win[0].len; ++#endif + if (io->nwin > 1) { ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,36) + p_dev->resource[1]->flags = p_dev->resource[0]->flags; + p_dev->resource[1]->start = io->win[1].base; + p_dev->resource[1]->end = io->win[1].len; ++#else ++ p_dev->io.Attributes2 = p_dev->io.Attributes1; ++ p_dev->io.BasePort2 = io->win[1].base; ++ p_dev->io.NumPorts2 = io->win[1].len; ++#endif + } + + /* This reserves IO space but doesn't actually enable it */ ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,36) + if (pcmcia_request_io(p_dev) != 0) ++#else ++ if (pcmcia_request_io(p_dev, &p_dev->io) != 0) ++#endif + goto next_entry; + } + return 0; +@@ -310,15 +341,23 @@ spectrum_cs_config(struct pcmcia_device goto failed; } @@ -331,7 +441,19 @@ if (ret) goto failed; -@@ -345,8 +355,17 @@ spectrum_cs_config(struct pcmcia_device + /* We initialize the hermes structure before completing PCMCIA + * configuration just in case the interrupt handler gets + * called. */ ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,36) + mem = ioport_map(link->resource[0]->start, + resource_size(link->resource[0])); ++#else ++ mem = ioport_map(link->io.BasePort1, link->io.NumPorts1); ++#endif + if (!mem) + goto failed; + +@@ -345,8 +384,16 @@ spectrum_cs_config(struct pcmcia_device } /* Register an interface with the stack */ @@ -343,7 +465,6 @@ + link->irq, NULL) != 0) { +#else + if (orinoco_if_add(priv, link->io.BasePort1, -+ link->irq, NULL) != 0) { + link->irq.AssignedIRQ, NULL) != 0) { +#endif printk(KERN_ERR PFX "orinoco_if_add() failed\n"); -- 1.7.1