From: Johannes Berg <johannes@sipsolutions.net>
To: Ajay Singh <ajay.kathat@microchip.com>, linux-wireless@vger.kernel.org
Cc: kvalo@codeaurora.org, gregkh@linuxfoundation.org,
ganesh.krishna@microchip.com, aditya.shankar@microchip.com,
venkateswara.kaja@microchip.com, claudiu.beznea@microchip.com,
adham.abozaeid@microchip.com
Subject: Re: [PATCH 05/19] wilc: add wilc_wlan_if.h
Date: Mon, 08 Oct 2018 16:33:44 +0200 [thread overview]
Message-ID: <1539009224.3687.68.camel@sipsolutions.net> (raw)
In-Reply-To: <1537957525-11467-6-git-send-email-ajay.kathat@microchip.com> (sfid-20180926_122555_951472_AF2668E3)
> +#define WILC_TX_ERR_NO_BUF (-2)
Hmm? what's wrong with just e.g. -ENOBUFS? If it doesn't go to userspace
it doesn't matter, and if it does you can't use this anyway? This would
be -ENOENT which is a bad idea.
> +
> +/********************************************
> + *
> + * Wlan Configuration ID
> + *
> + ********************************************/
> +#define WILC_MULTICAST_TABLE_SIZE 8
> +#define MAX_SSID_LEN 33
Err, it's 32?
> +#define MAX_RATES_SUPPORTED 12
> +
> +enum bss_types {
> + INFRASTRUCTURE = 0,
> + INDEPENDENT,
> + AP,
> +};
> +
> +enum {
> + B_ONLY_MODE = 0, /* 1, 2 M, otherwise 5, 11 M */
> + G_ONLY_MODE, /* 6,12,24 otherwise 9,18,36,48,54 */
> + G_MIXED_11B_1_MODE, /* 1,2,5.5,11 otherwise all on */
> + G_MIXED_11B_2_MODE, /* 1,2,5,11,6,12,24 otherwise all on */
> +};
> +
> +enum {
> + G_SHORT_PREAMBLE = 0, /* Short Preamble */
> + G_LONG_PREAMBLE = 1, /* Long Preamble */
> + G_AUTO_PREAMBLE = 2, /* Auto Preamble Selection */
> +};
here we have a lot of those "constants should have some sort of prefix"
things ... it's not even clear if they're spec or not:
> +enum authtype {
> + OPEN_SYSTEM = 1,
> + SHARED_KEY = 2,
> + ANY = 3,
> + IEEE8021 = 5
> +};
These look like they're spec but aren't ... not a good idea.
johannes
next prev parent reply other threads:[~2018-10-08 14:33 UTC|newest]
Thread overview: 72+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-09-26 10:25 [RFC 00/19] wilc: added driver for wilc module Ajay Singh
2018-09-26 10:25 ` [PATCH 01/19] wilc: add coreconfigurator.h Ajay Singh
2018-09-26 10:25 ` [PATCH 02/19] wilc: add coreconfigurator.c Ajay Singh
2018-10-08 14:16 ` Johannes Berg
2018-10-09 9:42 ` Ajay Singh
2018-10-09 10:05 ` Johannes Berg
2018-09-26 10:25 ` [PATCH 03/19] wilc: add host_interface.h Ajay Singh
2018-10-08 14:20 ` Johannes Berg
2018-10-09 10:34 ` Ajay Singh
2018-10-09 10:36 ` Johannes Berg
2018-10-09 11:44 ` Ajay Singh
2018-10-09 11:46 ` Johannes Berg
2018-10-09 12:18 ` Ajay Singh
2018-10-09 18:36 ` Adham.Abozaeid
2018-10-09 19:14 ` Johannes Berg
2018-10-09 20:01 ` Adham.Abozaeid
2018-10-09 20:02 ` Johannes Berg
2018-10-09 20:06 ` Adham.Abozaeid
2018-10-29 14:56 ` Kalle Valo
2018-10-30 3:20 ` Ajay.Kathat
2018-09-26 10:25 ` [PATCH 04/19] wilc: add host_interface.c Ajay Singh
2018-10-08 14:31 ` Johannes Berg
2018-10-10 20:06 ` Adham.Abozaeid
2018-10-11 7:01 ` Johannes Berg
2018-10-12 22:08 ` Adham.Abozaeid
2018-10-18 8:23 ` Johannes Berg
2018-10-18 18:30 ` Adham.Abozaeid
2018-10-19 7:02 ` Johannes Berg
2018-10-19 20:53 ` Adham.Abozaeid
2018-10-29 20:10 ` Johannes Berg
2018-10-29 21:32 ` Adham.Abozaeid
2018-10-29 21:33 ` Johannes Berg
2018-10-11 6:57 ` Ajay Singh
2018-10-10 20:14 ` Johannes Berg
2018-10-12 21:55 ` Adham.Abozaeid
2018-10-18 8:23 ` Johannes Berg
2018-09-26 10:25 ` [PATCH 05/19] wilc: add wilc_wlan_if.h Ajay Singh
2018-10-08 14:33 ` Johannes Berg [this message]
2018-10-11 6:59 ` Ajay Singh
2018-09-26 10:25 ` [PATCH 06/19] wilc: add wilc_wlan_cfg.h Ajay Singh
2018-09-26 10:25 ` [PATCH 07/19] wilc: add wilc_wlan_cfg.c Ajay Singh
2018-09-26 10:25 ` [PATCH 08/19] wilc: add wilc_wlan.h Ajay Singh
2018-09-26 10:25 ` [PATCH 09/19] wilc: add wilc_wlan.c Ajay Singh
2018-09-26 10:25 ` [PATCH 10/19] wilc: add wilc_wfi_netdevice.h Ajay Singh
2018-09-26 10:25 ` [PATCH 11/19] wilc: add wilc_wfi_cfgoperations.h Ajay Singh
2018-09-26 10:25 ` [PATCH 12/19] wilc: add wilc_wfi_cfgoperations.c Ajay Singh
2018-10-08 14:57 ` Johannes Berg
2018-10-09 4:23 ` Adham.Abozaeid
2018-10-09 7:55 ` Johannes Berg
2018-10-09 17:15 ` Adham.Abozaeid
2018-10-19 21:47 ` Adham.Abozaeid
2018-10-29 20:11 ` Johannes Berg
2018-10-29 21:43 ` Adham.Abozaeid
2018-09-26 10:25 ` [PATCH 13/19] wilc: add linux_wlan.c Ajay Singh
2018-10-08 14:41 ` Johannes Berg
2018-10-11 7:00 ` Ajay Singh
2018-10-11 7:03 ` Johannes Berg
2018-10-11 7:26 ` Ajay Singh
2018-09-26 10:25 ` [PATCH 14/19] wilc: add linux_mon.c Ajay Singh
2018-10-08 14:44 ` Johannes Berg
2018-10-11 7:12 ` Ajay Singh
2018-10-11 7:15 ` Johannes Berg
2018-09-26 10:25 ` [PATCH 15/19] wilc: add wilc_spi.c Ajay Singh
2018-09-26 10:25 ` [PATCH 16/19] wilc: add wilc_sdio.c Ajay Singh
2018-09-26 10:25 ` [PATCH 17/19] wilc: updated DT device binding for wilc device Ajay Singh
2018-09-26 10:25 ` [PATCH 18/19] wilc: add Makefile and Kconfig files for wilc compilation Ajay Singh
2018-09-26 10:25 ` [PATCH 19/19] wilc: added wilc module compilation in wireless Makefile & Kconfig Ajay Singh
2018-10-06 12:45 ` [RFC 00/19] wilc: added driver for wilc module Kalle Valo
2018-10-08 5:17 ` Ajay Singh
2018-10-08 7:38 ` Kalle Valo
2018-10-08 18:34 ` Adham.Abozaeid
2018-11-15 14:11 ` Kalle Valo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1539009224.3687.68.camel@sipsolutions.net \
--to=johannes@sipsolutions.net \
--cc=adham.abozaeid@microchip.com \
--cc=aditya.shankar@microchip.com \
--cc=ajay.kathat@microchip.com \
--cc=claudiu.beznea@microchip.com \
--cc=ganesh.krishna@microchip.com \
--cc=gregkh@linuxfoundation.org \
--cc=kvalo@codeaurora.org \
--cc=linux-wireless@vger.kernel.org \
--cc=venkateswara.kaja@microchip.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).