linux-wireless.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Maya Erez <merez@codeaurora.org>
To: Kalle Valo <kvalo@codeaurora.org>
Cc: Alexei Avshalom Lazar <ailizaro@codeaurora.org>,
	linux-wireless@vger.kernel.org, wil6210@qti.qualcomm.com,
	Maya Erez <merez@codeaurora.org>
Subject: [PATCH 04/11] wil6210: Add support for setting RBUFCAP configuration
Date: Sun, 16 Jun 2019 10:26:00 +0300	[thread overview]
Message-ID: <1560669967-23706-5-git-send-email-merez@codeaurora.org> (raw)
In-Reply-To: <1560669967-23706-1-git-send-email-merez@codeaurora.org>

From: Alexei Avshalom Lazar <ailizaro@codeaurora.org>

RBUFCAP support added in FW.
The RBUFCAP feature is amendment to the block ack mechanism to
prevent overloading of the recipient’s memory space, which may
happen in case the link speed is higher than STA’s capability
to process or consume incoming data.
The block ack policy (ba_policy) is now controlled by FW so driver
should ignore this field.
Add new debugfs "rbufcap" to configure RBUFCAP.

Signed-off-by: Alexei Avshalom Lazar <ailizaro@codeaurora.org>
Signed-off-by: Maya Erez <merez@codeaurora.org>
---
 drivers/net/wireless/ath/wil6210/debugfs.c    | 39 +++++++++++++++++++++++++++
 drivers/net/wireless/ath/wil6210/rx_reorder.c | 31 ++++++++-------------
 drivers/net/wireless/ath/wil6210/wil6210.h    |  1 +
 drivers/net/wireless/ath/wil6210/wmi.c        | 39 +++++++++++++++++++++++++--
 4 files changed, 88 insertions(+), 22 deletions(-)

diff --git a/drivers/net/wireless/ath/wil6210/debugfs.c b/drivers/net/wireless/ath/wil6210/debugfs.c
index 7a2c3fd..14778a1c 100644
--- a/drivers/net/wireless/ath/wil6210/debugfs.c
+++ b/drivers/net/wireless/ath/wil6210/debugfs.c
@@ -777,6 +777,44 @@ static ssize_t wil_write_file_rxon(struct file *file, const char __user *buf,
 	.open  = simple_open,
 };
 
+static ssize_t wil_write_file_rbufcap(struct file *file,
+				      const char __user *buf,
+				      size_t count, loff_t *ppos)
+{
+	struct wil6210_priv *wil = file->private_data;
+	int val;
+	int rc;
+
+	rc = kstrtoint_from_user(buf, count, 0, &val);
+	if (rc) {
+		wil_err(wil, "Invalid argument\n");
+		return rc;
+	}
+	/* input value: negative to disable, 0 to use system default,
+	 * 1..ring size to set descriptor threshold
+	 */
+	wil_info(wil, "%s RBUFCAP, descriptors threshold - %d\n",
+		 val < 0 ? "Disabling" : "Enabling", val);
+
+	if (!wil->ring_rx.va || val > wil->ring_rx.size) {
+		wil_err(wil, "Invalid descriptors threshold, %d\n", val);
+		return -EINVAL;
+	}
+
+	rc = wmi_rbufcap_cfg(wil, val < 0 ? 0 : 1, val < 0 ? 0 : val);
+	if (rc) {
+		wil_err(wil, "RBUFCAP config failed: %d\n", rc);
+		return rc;
+	}
+
+	return count;
+}
+
+static const struct file_operations fops_rbufcap = {
+	.write = wil_write_file_rbufcap,
+	.open  = simple_open,
+};
+
 /* block ack control, write:
  * - "add <ringid> <agg_size> <timeout>" to trigger ADDBA
  * - "del_tx <ringid> <reason>" to trigger DELBA for Tx side
@@ -2364,6 +2402,7 @@ static void wil6210_debugfs_init_blobs(struct wil6210_priv *wil,
 	{"tx_latency",	0644,		&fops_tx_latency},
 	{"link_stats",	0644,		&fops_link_stats},
 	{"link_stats_global",	0644,	&fops_link_stats_global},
+	{"rbufcap",	0244,		&fops_rbufcap},
 };
 
 static void wil6210_debugfs_init_files(struct wil6210_priv *wil,
diff --git a/drivers/net/wireless/ath/wil6210/rx_reorder.c b/drivers/net/wireless/ath/wil6210/rx_reorder.c
index 1c79664..784239b 100644
--- a/drivers/net/wireless/ath/wil6210/rx_reorder.c
+++ b/drivers/net/wireless/ath/wil6210/rx_reorder.c
@@ -316,7 +316,7 @@ int wil_addba_rx_request(struct wil6210_priv *wil, u8 mid, u8 cid, u8 tid,
 	u16 agg_timeout = le16_to_cpu(ba_timeout);
 	u16 seq_ctrl = le16_to_cpu(ba_seq_ctrl);
 	struct wil_sta_info *sta;
-	u16 agg_wsize = 0;
+	u16 agg_wsize;
 	/* bit 0: A-MSDU supported
 	 * bit 1: policy (should be 0 for us)
 	 * bits 2..5: TID
@@ -328,7 +328,6 @@ int wil_addba_rx_request(struct wil6210_priv *wil, u8 mid, u8 cid, u8 tid,
 		test_bit(WMI_FW_CAPABILITY_AMSDU, wil->fw_capabilities) &&
 		wil->amsdu_en && (param_set & BIT(0));
 	int ba_policy = param_set & BIT(1);
-	u16 status = WLAN_STATUS_SUCCESS;
 	u16 ssn = seq_ctrl >> 4;
 	struct wil_tid_ampdu_rx *r;
 	int rc = 0;
@@ -355,27 +354,19 @@ int wil_addba_rx_request(struct wil6210_priv *wil, u8 mid, u8 cid, u8 tid,
 		    agg_amsdu ? "+" : "-", !!ba_policy, dialog_token, ssn);
 
 	/* apply policies */
-	if (ba_policy) {
-		wil_err(wil, "BACK requested unsupported ba_policy == 1\n");
-		status = WLAN_STATUS_INVALID_QOS_PARAM;
-	}
-	if (status == WLAN_STATUS_SUCCESS) {
-		if (req_agg_wsize == 0) {
-			wil_dbg_misc(wil, "Suggest BACK wsize %d\n",
-				     wil->max_agg_wsize);
-			agg_wsize = wil->max_agg_wsize;
-		} else {
-			agg_wsize = min_t(u16,
-					  wil->max_agg_wsize, req_agg_wsize);
-		}
+	if (req_agg_wsize == 0) {
+		wil_dbg_misc(wil, "Suggest BACK wsize %d\n",
+			     wil->max_agg_wsize);
+		agg_wsize = wil->max_agg_wsize;
+	} else {
+		agg_wsize = min_t(u16, wil->max_agg_wsize, req_agg_wsize);
 	}
 
 	rc = wil->txrx_ops.wmi_addba_rx_resp(wil, mid, cid, tid, dialog_token,
-					     status, agg_amsdu, agg_wsize,
-					     agg_timeout);
-	if (rc || (status != WLAN_STATUS_SUCCESS)) {
-		wil_err(wil, "do not apply ba, rc(%d), status(%d)\n", rc,
-			status);
+					     WLAN_STATUS_SUCCESS, agg_amsdu,
+					     agg_wsize, agg_timeout);
+	if (rc) {
+		wil_err(wil, "do not apply ba, rc(%d)\n", rc);
 		goto out;
 	}
 
diff --git a/drivers/net/wireless/ath/wil6210/wil6210.h b/drivers/net/wireless/ath/wil6210/wil6210.h
index 4498403..75abec2 100644
--- a/drivers/net/wireless/ath/wil6210/wil6210.h
+++ b/drivers/net/wireless/ath/wil6210/wil6210.h
@@ -1406,6 +1406,7 @@ int wmi_start_sched_scan(struct wil6210_priv *wil,
 int wmi_mgmt_tx(struct wil6210_vif *vif, const u8 *buf, size_t len);
 int wmi_mgmt_tx_ext(struct wil6210_vif *vif, const u8 *buf, size_t len,
 		    u8 channel, u16 duration_ms);
+int wmi_rbufcap_cfg(struct wil6210_priv *wil, bool enable, u16 threshold);
 
 int reverse_memcmp(const void *cs, const void *ct, size_t count);
 
diff --git a/drivers/net/wireless/ath/wil6210/wmi.c b/drivers/net/wireless/ath/wil6210/wmi.c
index 0a0818f..298c918 100644
--- a/drivers/net/wireless/ath/wil6210/wmi.c
+++ b/drivers/net/wireless/ath/wil6210/wmi.c
@@ -484,6 +484,8 @@ static const char *cmdid2name(u16 cmdid)
 		return "WMI_FT_REASSOC_CMD";
 	case WMI_UPDATE_FT_IES_CMDID:
 		return "WMI_UPDATE_FT_IES_CMD";
+	case WMI_RBUFCAP_CFG_CMDID:
+		return "WMI_RBUFCAP_CFG_CMD";
 	default:
 		return "Untracked CMD";
 	}
@@ -628,6 +630,8 @@ static const char *eventid2name(u16 eventid)
 		return "WMI_FT_AUTH_STATUS_EVENT";
 	case WMI_FT_REASSOC_STATUS_EVENTID:
 		return "WMI_FT_REASSOC_STATUS_EVENT";
+	case WMI_RBUFCAP_CFG_EVENTID:
+		return "WMI_RBUFCAP_CFG_EVENT";
 	default:
 		return "Untracked EVENT";
 	}
@@ -2124,6 +2128,37 @@ int wmi_led_cfg(struct wil6210_priv *wil, bool enable)
 	return rc;
 }
 
+int wmi_rbufcap_cfg(struct wil6210_priv *wil, bool enable, u16 threshold)
+{
+	struct wil6210_vif *vif = ndev_to_vif(wil->main_ndev);
+	int rc;
+
+	struct wmi_rbufcap_cfg_cmd cmd = {
+		.enable = enable,
+		.rx_desc_threshold = cpu_to_le16(threshold),
+	};
+	struct {
+		struct wmi_cmd_hdr wmi;
+		struct wmi_rbufcap_cfg_event evt;
+	} __packed reply = {
+		.evt = {.status = WMI_FW_STATUS_FAILURE},
+	};
+
+	rc = wmi_call(wil, WMI_RBUFCAP_CFG_CMDID, vif->mid, &cmd, sizeof(cmd),
+		      WMI_RBUFCAP_CFG_EVENTID, &reply, sizeof(reply),
+		      WIL_WMI_CALL_GENERAL_TO_MS);
+	if (rc)
+		return rc;
+
+	if (reply.evt.status != WMI_FW_STATUS_SUCCESS) {
+		wil_err(wil, "RBUFCAP_CFG failed. status %d\n",
+			reply.evt.status);
+		rc = -EINVAL;
+	}
+
+	return rc;
+}
+
 int wmi_pcp_start(struct wil6210_vif *vif,
 		  int bi, u8 wmi_nettype, u8 chan, u8 hidden_ssid, u8 is_go)
 {
@@ -2715,7 +2750,7 @@ int wmi_addba_rx_resp(struct wil6210_priv *wil,
 		.dialog_token = token,
 		.status_code = cpu_to_le16(status),
 		/* bit 0: A-MSDU supported
-		 * bit 1: policy (should be 0 for us)
+		 * bit 1: policy (controlled by FW)
 		 * bits 2..5: TID
 		 * bits 6..15: buffer size
 		 */
@@ -2769,7 +2804,7 @@ int wmi_addba_rx_resp_edma(struct wil6210_priv *wil, u8 mid, u8 cid, u8 tid,
 		.dialog_token = token,
 		.status_code = cpu_to_le16(status),
 		/* bit 0: A-MSDU supported
-		 * bit 1: policy (should be 0 for us)
+		 * bit 1: policy (controlled by FW)
 		 * bits 2..5: TID
 		 * bits 6..15: buffer size
 		 */
-- 
1.9.1


  parent reply	other threads:[~2019-06-16  7:33 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-06-16  7:25 [PATCH 00/11] wil6210 patches Maya Erez
2019-06-16  7:25 ` [PATCH 01/11] wil6210: do not reset FW in STA to P2P client interface switch Maya Erez
2019-06-27 17:51   ` Kalle Valo
2019-06-16  7:25 ` [PATCH 02/11] wil6210: enlarge Tx status ring size Maya Erez
2019-06-16  7:25 ` [PATCH 03/11] wil6210: increase the frequency of status ring hw tail update Maya Erez
2019-06-16  7:26 ` Maya Erez [this message]
2019-06-16  7:26 ` [PATCH 05/11] wil6210: fix printout in wil_read_pmccfg Maya Erez
2019-06-16  7:26 ` [PATCH 06/11] wil6210: clear FW and ucode log address Maya Erez
2019-06-16  7:26 ` [PATCH 07/11] wil6210: update cid boundary check of wil_find_cid/_by_idx() Maya Erez
2019-06-16  7:26 ` [PATCH 08/11] wil6210: publish max_msdu_size to FW on BCAST ring Maya Erez
2019-06-16  7:26 ` [PATCH 09/11] wil6210: add support for reading multiple RFs temperature via debugfs Maya Erez
2019-06-16  7:26 ` [PATCH 10/11] wil6210: set WIL_WMI_CALL_GENERAL_TO_MS as wmi_call timeout Maya Erez
2019-06-16  7:26 ` [PATCH 11/11] wil6210: drop old event after " Maya Erez

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1560669967-23706-5-git-send-email-merez@codeaurora.org \
    --to=merez@codeaurora.org \
    --cc=ailizaro@codeaurora.org \
    --cc=kvalo@codeaurora.org \
    --cc=linux-wireless@vger.kernel.org \
    --cc=wil6210@qti.qualcomm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).