From: Kalle Valo <kvalo@codeaurora.org>
To: ath11k@lists.infradead.org
Cc: linux-wireless@vger.kernel.org
Subject: [PATCH 05/12] ath11k: Add bdf-addr in hw_params
Date: Tue, 16 Jun 2020 17:00:48 +0300 [thread overview]
Message-ID: <1592316055-24958-6-git-send-email-kvalo@codeaurora.org> (raw)
In-Reply-To: <1592316055-24958-1-git-send-email-kvalo@codeaurora.org>
From: Anilkumar Kolli <akolli@codeaurora.org>
bdf-addr is different for IPQ8074 and IPQ6018 so add it to hw_params.
No functional changes. Compile tested only.
Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
drivers/net/wireless/ath/ath11k/core.c | 1 +
drivers/net/wireless/ath/ath11k/hw.h | 2 ++
drivers/net/wireless/ath/ath11k/qmi.c | 6 +++---
drivers/net/wireless/ath/ath11k/qmi.h | 1 -
4 files changed, 6 insertions(+), 4 deletions(-)
diff --git a/drivers/net/wireless/ath/ath11k/core.c b/drivers/net/wireless/ath/ath11k/core.c
index 089b46ba86c5..5232a355ac12 100644
--- a/drivers/net/wireless/ath/ath11k/core.c
+++ b/drivers/net/wireless/ath/ath11k/core.c
@@ -27,6 +27,7 @@ static const struct ath11k_hw_params ath11k_hw_params[] = {
.cal_size = IPQ8074_MAX_CAL_DATA_SZ,
},
.max_radios = 3,
+ .bdf_addr = 0x4B0C0000,
.hw_ops = &ipq8074_ops,
},
};
diff --git a/drivers/net/wireless/ath/ath11k/hw.h b/drivers/net/wireless/ath/ath11k/hw.h
index 2fb986b9a6cb..78518e3f773d 100644
--- a/drivers/net/wireless/ath/ath11k/hw.h
+++ b/drivers/net/wireless/ath/ath11k/hw.h
@@ -112,6 +112,8 @@ struct ath11k_hw_params {
const char *name;
u16 hw_rev;
u8 max_radios;
+ u32 bdf_addr;
+
struct {
const char *dir;
size_t board_size;
diff --git a/drivers/net/wireless/ath/ath11k/qmi.c b/drivers/net/wireless/ath/ath11k/qmi.c
index c00a99ad8dbc..e4198d3b0bae 100644
--- a/drivers/net/wireless/ath/ath11k/qmi.c
+++ b/drivers/net/wireless/ath/ath11k/qmi.c
@@ -1681,8 +1681,8 @@ static int ath11k_qmi_alloc_target_mem_chunk(struct ath11k_base *ab)
for (i = 0, idx = 0; i < ab->qmi.mem_seg_count; i++) {
switch (ab->qmi.target_mem[i].type) {
case BDF_MEM_REGION_TYPE:
- ab->qmi.target_mem[idx].paddr = ATH11K_QMI_BDF_ADDRESS;
- ab->qmi.target_mem[idx].vaddr = ATH11K_QMI_BDF_ADDRESS;
+ ab->qmi.target_mem[idx].paddr = ab->hw_params.bdf_addr;
+ ab->qmi.target_mem[idx].vaddr = ab->hw_params.bdf_addr;
ab->qmi.target_mem[idx].size = ab->qmi.target_mem[i].size;
ab->qmi.target_mem[idx].type = ab->qmi.target_mem[i].type;
idx++;
@@ -1854,7 +1854,7 @@ static int ath11k_qmi_load_bdf(struct ath11k_base *ab)
return -ENOMEM;
memset(&resp, 0, sizeof(resp));
- bdf_addr = ioremap(ATH11K_QMI_BDF_ADDRESS, ATH11K_QMI_BDF_MAX_SIZE);
+ bdf_addr = ioremap(ab->hw_params.bdf_addr, ATH11K_QMI_BDF_MAX_SIZE);
if (!bdf_addr) {
ath11k_warn(ab, "qmi ioremap error for BDF\n");
ret = -EIO;
diff --git a/drivers/net/wireless/ath/ath11k/qmi.h b/drivers/net/wireless/ath/ath11k/qmi.h
index 3f7db642d869..a7a0a189cbe4 100644
--- a/drivers/net/wireless/ath/ath11k/qmi.h
+++ b/drivers/net/wireless/ath/ath11k/qmi.h
@@ -12,7 +12,6 @@
#define ATH11K_HOST_VERSION_STRING "WIN"
#define ATH11K_QMI_WLANFW_TIMEOUT_MS 5000
#define ATH11K_QMI_MAX_BDF_FILE_NAME_SIZE 64
-#define ATH11K_QMI_BDF_ADDRESS 0x4B0C0000
#define ATH11K_QMI_BDF_MAX_SIZE (256 * 1024)
#define ATH11K_QMI_CALDATA_OFFSET (128 * 1024)
#define ATH11K_QMI_WLANFW_MAX_BUILD_ID_LEN_V01 128
--
2.7.4
next prev parent reply other threads:[~2020-06-16 14:01 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-06-16 14:00 [PATCH 00/12] preparation for IPQ6018 support Kalle Valo
2020-06-16 14:00 ` [PATCH 01/12] ath11k: ahb: call ath11k_core_init() before irq configuration Kalle Valo
2020-06-23 7:53 ` Kalle Valo
2020-06-16 14:00 ` [PATCH 02/12] ath11k: convert ath11k_hw_params to an array Kalle Valo
2020-06-16 14:00 ` [PATCH 03/12] ath11k: define max_radios in hw_params Kalle Valo
2020-06-16 14:00 ` [PATCH 04/12] ath11k: add hw_ops for pdev id to hw_mac mapping Kalle Valo
2020-06-16 14:00 ` Kalle Valo [this message]
2020-06-16 14:00 ` [PATCH 06/12] ath11k: create a common function to request all firmware files Kalle Valo
2020-06-16 14:00 ` [PATCH 07/12] ath11k: don't use defines for hw specific firmware directories Kalle Valo
2020-06-16 14:00 ` [PATCH 08/12] ath11k: change ath11k_core_fetch_board_data_api_n() to use ath11k_core_create_firmware_path() Kalle Valo
2020-06-16 14:00 ` [PATCH 09/12] ath11k: remove useless info messages Kalle Valo
2020-06-16 14:00 ` [PATCH 10/12] ath11k: qmi: cleanup " Kalle Valo
2020-06-16 14:00 ` [PATCH 11/12] ath11k: don't use defines in hw_params Kalle Valo
2020-06-16 14:00 ` [PATCH 12/12] ath11k: remove define ATH11K_QMI_DEFAULT_CAL_FILE_NAME Kalle Valo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1592316055-24958-6-git-send-email-kvalo@codeaurora.org \
--to=kvalo@codeaurora.org \
--cc=ath11k@lists.infradead.org \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).