From: Kalle Valo <kalle.valo@iki.fi>
To: linville@tuxdriver.com
Cc: linux-wireless@vger.kernel.org
Subject: [PATCH 15/23] wl1251: add channel to wl1251_cmd_join() parameters
Date: Fri, 07 Aug 2009 13:34:34 +0300 [thread overview]
Message-ID: <20090807103434.31717.15352.stgit@tikku> (raw)
In-Reply-To: <20090807102732.31717.84006.stgit@tikku>
From: Kalle Valo <kalle.valo@nokia.com>
Because join channel tunes to a channel, better to make it more obvious
by adding a parameter for it.
Signed-off-by: Kalle Valo <kalle.valo@nokia.com>
Reviewed-by: Vidhya Govindan <vidhya.govindan@nokia.com>
---
drivers/net/wireless/wl12xx/wl1251_cmd.c | 10 +++++-----
drivers/net/wireless/wl12xx/wl1251_cmd.h | 4 ++--
drivers/net/wireless/wl12xx/wl1251_main.c | 10 +++++-----
3 files changed, 12 insertions(+), 12 deletions(-)
diff --git a/drivers/net/wireless/wl12xx/wl1251_cmd.c b/drivers/net/wireless/wl12xx/wl1251_cmd.c
index e276cb5..4e796db 100644
--- a/drivers/net/wireless/wl12xx/wl1251_cmd.c
+++ b/drivers/net/wireless/wl12xx/wl1251_cmd.c
@@ -251,8 +251,8 @@ out:
return ret;
}
-int wl1251_cmd_join(struct wl1251 *wl, u8 bss_type, u16 beacon_interval,
- u8 dtim_interval)
+int wl1251_cmd_join(struct wl1251 *wl, u8 bss_type, u8 channel,
+ u16 beacon_interval, u8 dtim_interval)
{
unsigned long timeout;
struct cmd_join *join;
@@ -273,9 +273,9 @@ int wl1251_cmd_join(struct wl1251 *wl, u8 bss_type, u16 beacon_interval,
if (ret < 0)
goto out;
- wl1251_debug(DEBUG_CMD, "cmd join%s %d %d",
+ wl1251_debug(DEBUG_CMD, "cmd join%s ch %d %d/%d",
bss_type == BSS_TYPE_IBSS ? " ibss" : "",
- beacon_interval, dtim_interval);
+ channel, beacon_interval, dtim_interval);
/* Reverse order BSSID */
bssid = (u8 *) &join->bssid_lsb;
@@ -291,7 +291,7 @@ int wl1251_cmd_join(struct wl1251 *wl, u8 bss_type, u16 beacon_interval,
join->beacon_interval = beacon_interval;
join->dtim_interval = dtim_interval;
join->bss_type = bss_type;
- join->channel = wl->channel;
+ join->channel = channel;
join->ctrl = JOIN_CMD_CTRL_TX_FLUSH;
ret = wl1251_cmd_send(wl, CMD_START_JOIN, join, sizeof(*join));
diff --git a/drivers/net/wireless/wl12xx/wl1251_cmd.h b/drivers/net/wireless/wl12xx/wl1251_cmd.h
index ffeabf2..dff798a 100644
--- a/drivers/net/wireless/wl12xx/wl1251_cmd.h
+++ b/drivers/net/wireless/wl12xx/wl1251_cmd.h
@@ -36,8 +36,8 @@ int wl1251_cmd_configure(struct wl1251 *wl, u16 id, void *buf, size_t len);
int wl1251_cmd_vbm(struct wl1251 *wl, u8 identity,
void *bitmap, u16 bitmap_len, u8 bitmap_control);
int wl1251_cmd_data_path(struct wl1251 *wl, u8 channel, bool enable);
-int wl1251_cmd_join(struct wl1251 *wl, u8 bss_type, u16 beacon_interval,
- u8 dtim_interval);
+int wl1251_cmd_join(struct wl1251 *wl, u8 bss_type, u8 channel,
+ u16 beacon_interval, u8 dtim_interval);
int wl1251_cmd_ps_mode(struct wl1251 *wl, u8 ps_mode);
int wl1251_cmd_read_memory(struct wl1251 *wl, u32 addr, void *answer,
size_t len);
diff --git a/drivers/net/wireless/wl12xx/wl1251_main.c b/drivers/net/wireless/wl12xx/wl1251_main.c
index 2514c94..5e90459 100644
--- a/drivers/net/wireless/wl12xx/wl1251_main.c
+++ b/drivers/net/wireless/wl12xx/wl1251_main.c
@@ -324,7 +324,7 @@ static void wl1251_filter_work(struct work_struct *work)
if (ret < 0)
goto out;
- ret = wl1251_cmd_join(wl, wl->bss_type, wl->beacon_int,
+ ret = wl1251_cmd_join(wl, wl->bss_type, wl->channel, wl->beacon_int,
wl->dtim_period);
if (ret < 0)
goto out_sleep;
@@ -565,8 +565,8 @@ static int wl1251_op_config(struct ieee80211_hw *hw, u32 changed)
goto out;
if (channel != wl->channel) {
- ret = wl1251_cmd_join(wl, wl->bss_type, wl->beacon_int,
- wl->dtim_period);
+ ret = wl1251_cmd_join(wl, wl->bss_type, wl->channel,
+ wl->beacon_int, wl->dtim_period);
if (ret < 0)
goto out_sleep;
@@ -1123,7 +1123,7 @@ static void wl1251_op_bss_info_changed(struct ieee80211_hw *hw,
goto out;
if (wl->bss_type != BSS_TYPE_IBSS) {
- ret = wl1251_cmd_join(wl, wl->bss_type,
+ ret = wl1251_cmd_join(wl, wl->bss_type, wl->channel,
wl->beacon_int,
wl->dtim_period);
if (ret < 0)
@@ -1152,7 +1152,7 @@ static void wl1251_op_bss_info_changed(struct ieee80211_hw *hw,
goto out;
ret = wl1251_cmd_join(wl, wl->bss_type, wl->beacon_int,
- wl->dtim_period);
+ wl->channel, wl->dtim_period);
if (ret < 0)
goto out;
next prev parent reply other threads:[~2009-08-07 10:34 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-08-07 10:32 [PATCH 00/23] wl1251 sdio support Kalle Valo
2009-08-07 10:32 ` [PATCH 01/23] wl1251: remove fixed address support from spi commands Kalle Valo
2009-08-07 10:32 ` [PATCH 02/23] wl1251: separate bus i/o code into io.c Kalle Valo
2009-08-07 10:33 ` [PATCH 03/23] wl1251: use wiphy_dev instead of wl->spi->dev Kalle Valo
2009-08-07 10:33 ` [PATCH 04/23] wl1251: introduce wl1251_if_operations struct Kalle Valo
2009-08-07 10:33 ` [PATCH 05/23] wl1251: make wl1251_set_partition bus agnostic Kalle Valo
2009-08-07 10:33 ` [PATCH 06/23] wl1251: move module probe methods into spi.c Kalle Valo
2009-08-07 10:33 ` [PATCH 07/23] wl1251: split spi interface into separate module Kalle Valo
2009-08-07 10:33 ` [PATCH 08/23] wl1251: add sdio support Kalle Valo
2009-08-07 10:33 ` [PATCH 09/23] wl1251: make irq handling interface specific Kalle Valo
2009-08-07 10:33 ` [PATCH 10/23] wl1251: remove wl1251_ops Kalle Valo
2009-08-07 10:34 ` [PATCH 11/23] wl1251: reorder wl1251_cmd_join() arguments Kalle Valo
2009-08-07 10:34 ` [PATCH 12/23] wl1251: use beacon interval and dtim period provided by mac80211 Kalle Valo
2009-08-07 10:34 ` [PATCH 13/23] wl1251: remove wait parameter from wl1251_cmd_join() Kalle Valo
2009-08-07 10:34 ` [PATCH 14/23] wl1251: initialise default channel to zero Kalle Valo
2009-08-07 10:34 ` Kalle Valo [this message]
2009-08-07 10:34 ` [PATCH 16/23] wl1251: create wl1251_join() Kalle Valo
2009-08-07 10:34 ` [PATCH 17/23] wl1251: fix channel setting in wl1251_op_config() Kalle Valo
2009-08-07 10:34 ` [PATCH 18/23] wl1251: move wl1251_acx_wake_up_conditions() to wl1251_ps_set_mode() Kalle Valo
2009-08-07 10:35 ` [PATCH 19/23] wl1251: use workqueue provided by mac80211 Kalle Valo
2009-08-07 10:35 ` [PATCH 20/23] wl1251: rename reg.h to wl1251_reg.h Kalle Valo
2009-08-07 10:35 ` [PATCH 21/23] wl1251: remove Luciano as maintainer Kalle Valo
2009-08-07 10:46 ` Luciano Coelho
2009-08-07 10:35 ` [PATCH 22/23] wl1251: add hw scan completed debug message Kalle Valo
2009-08-07 10:35 ` [PATCH 23/23] wl1251: hack to disable filters for fixing association Kalle Valo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090807103434.31717.15352.stgit@tikku \
--to=kalle.valo@iki.fi \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).