From: Daniel Mack <daniel@caiaq.de>
To: linux-kernel@vger.kernel.org
Cc: linux-wireless@vger.kernel.org,
Sven Neumann <s.neumann@raumfeld.com>,
Michael Hirsch <m.hirsch@raumfeld.com>
Subject: wireless: Problems with ath5k and 2.6.35
Date: Sat, 7 Aug 2010 19:21:08 +0200 [thread overview]
Message-ID: <20100807172108.GA15974@buzzloop.caiaq.de> (raw)
Hi,
we're having problems using an ath5k-based mini-PCI card on a mainboard
with a Geode CS5535 chipset. Below is the output generated by 2.6.35
vanilla, the first block is reported at boot time, the second one some
seconds later.
Don't know if this has been reported before, but at least I couldn't
find anything in recent LKML postings.
Thanks,
Daniel
[ 2.142771] ath5k 0000:00:0c.0: guessed PCI INT A -> IRQ 9
[ 2.148319] ath5k 0000:00:0c.0: sharing IRQ 9 with 0000:00:01.2
[ 2.154548] ath5k 0000:00:0c.0: registered as 'phy0'
[ 3.126593] irq 9: nobody cared (try booting with the "irqpoll" option)
[ 3.130015] Pid: 1, comm: swapper Not tainted 2.6.35+ #1
[ 3.130015] Call Trace:
[ 3.130015] [<c013e984>] __report_bad_irq+0x2e/0x6f
[ 3.130015] [<c013eab5>] note_interrupt+0xf0/0x147
[ 3.130015] [<c013f076>] handle_level_irq+0x6d/0x99
[ 3.130015] [<c0103bf6>] handle_irq+0x1a/0x20
[ 3.130015] [<c0103810>] do_IRQ+0x33/0x88
[ 3.130015] [<c0102a69>] common_interrupt+0x29/0x30
[ 3.130015] [<c0120e3c>] ? __do_softirq+0x34/0xca
[ 3.130015] [<c0120ef7>] do_softirq+0x25/0x2a
[ 3.130015] [<c0120fb7>] irq_exit+0x28/0x57
[ 3.130015] [<c0103850>] do_IRQ+0x73/0x88
[ 3.130015] [<c0102a69>] common_interrupt+0x29/0x30
[ 3.130015] [<c013007b>] ? __async_schedule+0x38/0xe9
[ 3.130015] [<c013e420>] ? __setup_irq+0x1d8/0x259
[ 3.130015] [<c013e544>] request_threaded_irq+0xa3/0xd0
[ 3.130015] [<c02486e5>] ? ath5k_intr+0x0/0x28b
[ 3.130015] [<c032e15c>] ath5k_pci_probe+0x2f4/0x13c5
[ 3.130015] [<c01e63fe>] ? idr_get_empty_slot+0x14f/0x24e
[ 3.130015] [<c0197f53>] ? sysfs_find_dirent+0x28/0x3a
[ 3.130015] [<c0198875>] ? sysfs_addrm_finish+0x15/0x9b
[ 3.130015] [<c0198258>] ? sysfs_add_one+0x12/0x7a
[ 3.130015] [<c01f76fb>] local_pci_probe+0xe/0x10
[ 3.130015] [<c01f77ff>] pci_device_probe+0x43/0x66
[ 3.130015] [<c021ac3d>] driver_probe_device+0x7a/0x10d
[ 3.130015] [<c021ad13>] __driver_attach+0x43/0x5f
[ 3.130015] [<c021a673>] bus_for_each_dev+0x3d/0x67
[ 3.130015] [<c021ab15>] driver_attach+0x14/0x16
[ 3.130015] [<c021acd0>] ? __driver_attach+0x0/0x5f
[ 3.130015] [<c021a0d8>] bus_add_driver+0xa2/0x1d1
[ 3.130015] [<c04471c1>] ? kernel_init+0x0/0x10c
[ 3.130015] [<c021af57>] driver_register+0x8b/0xeb
[ 3.130015] [<c045ec70>] ? net_olddevs_init+0x0/0x82
[ 3.130015] [<c04471c1>] ? kernel_init+0x0/0x10c
[ 3.130015] [<c01f799d>] __pci_register_driver+0x31/0x8a
[ 3.130015] [<c04471c1>] ? kernel_init+0x0/0x10c
[ 3.130015] [<c045ed45>] ? init_ath5k_pci+0x0/0x2d
[ 3.130015] [<c045ed5a>] init_ath5k_pci+0x15/0x2d
[ 3.130015] [<c010104b>] do_one_initcall+0x4b/0x130
[ 3.130015] [<c04471c1>] ? kernel_init+0x0/0x10c
[ 3.130015] [<c044724c>] kernel_init+0x8b/0x10c
[ 3.130015] [<c0102a76>] kernel_thread_helper+0x6/0x10
[ 3.130015] handlers:
[ 3.130015] [<c02486e5>] (ath5k_intr+0x0/0x28b)
[ 3.130015] Disabling IRQ #9
[ 4.014683] ath5k phy0: Atheros AR5414 chip found (MAC: 0xa5, PHY: 0x61)
[...]
[ 13.510198] BUG: unable to handle kernel NULL pointer dereference at 0000009b
[ 13.517396] IP: [<c1138a54>] ath5k_hw_is_intr_pending+0x1/0x19
[ 13.520166] *pde = 00000000
[ 13.520166] Oops: 0000 [#1]
[ 13.520166] last sysfs file:
[ 13.520166] Modules linked in:
[ 13.520166]
[ 13.520166] Pid: 0, comm: swapper Not tainted 2.6.34 #1 /
[ 13.520166] EIP: 0060:[<c1138a54>] EFLAGS: 00010046 CPU: 0
[ 13.520166] EIP is at ath5k_hw_is_intr_pending+0x1/0x19
[ 13.520166] EAX: ffffffff EBX: cf9289a0 ECX: c12f5f24 EDX: cf9289a0
[ 13.520166] ESI: c1303920 EDI: ffffffff EBP: c12f5ee4 ESP: c12f5e98
[ 13.520166] DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068
[ 13.520166] Process swapper (pid: 0, ti=c12f4000 task=c12fa300 task.ti=c12f4000)
[ 13.520166] Stack:
[ 13.520166] c12f5ee4 c1143674 00000082 c12f5eb4 c103df6b 00000000 00000030 c12f5ec0
[ 13.520166] <0> c12f5ec0 c10201ff c12f5ed8 c100393c c12f5f88 cfbdba00 00000001 c141e080
[ 13.520166] <0> cfbe1de0 c1303920 00000000 c12f5efc c103d773 00000009 00000009 c141e080
[ 13.520166] Call Trace:
[ 13.520166] [<c1143674>] ? ath5k_intr+0x25/0x1f5
next reply other threads:[~2010-08-07 17:21 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-08-07 17:21 Daniel Mack [this message]
2010-08-08 8:20 ` wireless: Problems with ath5k and 2.6.35 Jiri Slaby
2010-08-08 18:25 ` Daniel Mack
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100807172108.GA15974@buzzloop.caiaq.de \
--to=daniel@caiaq.de \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-wireless@vger.kernel.org \
--cc=m.hirsch@raumfeld.com \
--cc=s.neumann@raumfeld.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).