linux-wireless.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Sasha Levin <sashal@kernel.org>
To: Sasha Levin <sashal@kernel.org>
To: Christian Lamparter <chunkeey@gmail.com>
To: linux-wireless@vger.kernel.org, ath10k@lists.infradead.org
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: stable@vger.kernel.org
Cc: stable@vger.kernel.org
Subject: Re: [PATCH] ath10k: restore QCA9880-AR1A (v1) detection
Date: Sat, 07 Sep 2019 21:43:58 +0000	[thread overview]
Message-ID: <20190907214359.1C52A21835@mail.kernel.org> (raw)
In-Reply-To: <20190906215423.23589-1-chunkeey@gmail.com>

Hi,

[This is an automated email]

This commit has been processed because it contains a "Fixes:" tag,
fixing commit: 1a7fecb766c8 ath10k: reset chip before reading chip_id in probe.

The bot has tested the following trees: v5.2.13, v4.19.71, v4.14.142, v4.9.191, v4.4.191.

v5.2.13: Failed to apply! Possible dependencies:
    6d084ac27ab4 ("ath10k: initialise struct ath10k_bus params to zero")

v4.19.71: Failed to apply! Possible dependencies:
    31324d17976e ("ath10k: support extended board data download for dual-band QCA9984")
    5849ed48d226 ("ath10k: refactoring needed for extended board data download")
    6d084ac27ab4 ("ath10k: initialise struct ath10k_bus params to zero")
    7c2dd6154fc2 ("ath10k: add device type enum to ath10k_bus_params")
    ba94c753ccb4 ("ath10k: add QMI message handshake for wcn3990 client")
    c0d8d565787c ("ath10k: add struct ath10k_bus_params")
    de8781d7e74d ("ath10k: disable interface pause wow config for integrated chipset")
    f1908735f141 ("ath10k: allow ATH10K_SNOC with COMPILE_TEST")

v4.14.142: Failed to apply! Possible dependencies:
    0fa4fbe9b8cf ("ath10k: add hif power-up/power-down methods")
    17f5559e0da5 ("ath10k: platform driver for WCN3990 SNOC WLAN module")
    2a1e1ad3fd37 ("ath10k: Add support for 64 bit ce descriptor")
    50c51f394e68 ("ath10k: do not mix spaces and tabs in Kconfig")
    5dac5f3772f6 ("ath10k: Use dma_addr_t for ce buffers to support 64bit target")
    6d084ac27ab4 ("ath10k: initialise struct ath10k_bus params to zero")
    7f9befbb555d ("ath10k: move pktlog_filter out of ath10k_debug")
    84efe7f6ebc5 ("ath10k: map HTC services to tx/rx pipes for wcn3990")
    a0aedd6e0b57 ("ath10k: build ce layer in ath10k core module")
    a6a793f98786 ("ath10k: vote for hardware resources for WCN3990")
    a6e149a9ff03 ("ath10k: add hif start/stop methods for wcn3990 snoc layer")
    ba94c753ccb4 ("ath10k: add QMI message handshake for wcn3990 client")
    c0d8d565787c ("ath10k: add struct ath10k_bus_params")
    c963a683e701 ("ath10k: add resource init and deinit for WCN3990")
    d390509bdf50 ("ath10k: add hif tx methods for wcn3990")
    dafa42036012 ("ath10k: use 64-bit crash dump timestamps")
    e2fcf60c6fe8 ("ath10k: detach coredump.c from debug.c")
    f1908735f141 ("ath10k: allow ATH10K_SNOC with COMPILE_TEST")
    f25b9f285a0e ("ath10k: refactor firmware crashdump code to coredump.c")

v4.9.191: Failed to apply! Possible dependencies:
    0fa4fbe9b8cf ("ath10k: add hif power-up/power-down methods")
    17f5559e0da5 ("ath10k: platform driver for WCN3990 SNOC WLAN module")
    4db66499df91 ("ath10k: add initial USB support")
    50c51f394e68 ("ath10k: do not mix spaces and tabs in Kconfig")
    5524ddd4c1f1 ("ath10k: select WANT_DEV_COREDUMP")
    6d084ac27ab4 ("ath10k: initialise struct ath10k_bus params to zero")
    84efe7f6ebc5 ("ath10k: map HTC services to tx/rx pipes for wcn3990")
    a0aedd6e0b57 ("ath10k: build ce layer in ath10k core module")
    a6a793f98786 ("ath10k: vote for hardware resources for WCN3990")
    a6e149a9ff03 ("ath10k: add hif start/stop methods for wcn3990 snoc layer")
    ba94c753ccb4 ("ath10k: add QMI message handshake for wcn3990 client")
    c0d8d565787c ("ath10k: add struct ath10k_bus_params")
    c963a683e701 ("ath10k: add resource init and deinit for WCN3990")
    cec17c382140 ("ath10k: add per peer htt tx stats support for 10.4")
    d390509bdf50 ("ath10k: add hif tx methods for wcn3990")
    d96db25d2025 ("ath10k: add initial SDIO support")
    f1908735f141 ("ath10k: allow ATH10K_SNOC with COMPILE_TEST")

v4.4.191: Failed to apply! Possible dependencies:
    0b523ced9a3c ("ath10k: add basic skeleton to support ahb")
    0d87c9208a17 ("ath10k: expose hif ops for ahb")
    133df0f849bc ("ath10k: add chip and bus halt logic in ahb")
    14854bfd9daa ("ath10k: add reset ctrl related functions in ahb")
    1c44fcb9234c ("ath10k: include irq related functions in ahb")
    4ddb3299aa49 ("ath10k: make ath10k_pci_read32/write32() ops more generic")
    6d084ac27ab4 ("ath10k: initialise struct ath10k_bus params to zero")
    704dc4e36769 ("ath10k: add resource init and deinit in ahb")
    7f8e79cdc253 ("ath10k: add helper functions in ahb.c for reg rd/wr")
    8beff219c528 ("ath10k: add clock ctrl related functions in ahb")
    f52f517189de ("ath10k: make some of ath10k_pci_* func reusable")


NOTE: The patch will not be queued to stable trees until it is upstream.

How should we proceed with this patch?

--
Thanks,
Sasha

  reply	other threads:[~2019-09-07 21:44 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-09-06 21:54 [PATCH] ath10k: restore QCA9880-AR1A (v1) detection Christian Lamparter
2019-09-07 21:43 ` Sasha Levin [this message]
2019-09-07 23:18   ` stable backports for "ath10k: restore QCA9880-AR1A (v1) detection" Christian Lamparter
2019-09-10  1:27   ` [PATCH] ath10k: restore QCA9880-AR1A (v1) detection Tom Psyborg
2019-09-10  7:21     ` Kalle Valo
2019-09-10 12:59       ` Tom Psyborg
2019-09-08  6:32 ` Tom Psyborg
2019-09-17  6:44 ` Kalle Valo
2019-09-18 21:30   ` Tom Psyborg
     [not found] ` <20190917064412.C2E0D61572@smtp.codeaurora.org>
2019-09-20 17:19   ` Christian Lamparter
2019-10-01 13:03     ` Kalle Valo
2019-10-01 14:17       ` Tom Psyborg
2019-10-02 17:19 ` Kalle Valo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190907214359.1C52A21835@mail.kernel.org \
    --to=sashal@kernel.org \
    --cc=kvalo@codeaurora.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).