From: Kalle Valo <kvalo@codeaurora.org>
To: Luca Coelho <luca@coelho.fi>
Cc: linux-wireless@vger.kernel.org
Subject: Re: pull-request: iwlwifi-next 2021-02-10
Date: Thu, 11 Feb 2021 18:43:16 +0000 (UTC) [thread overview]
Message-ID: <20210211184316.A9B7AC433C6@smtp.codeaurora.org> (raw)
In-Reply-To: <8fc242539c12e702080789efd0e2f333d2c13bfd.camel@coelho.fi>
Luca Coelho <luca@coelho.fi> wrote:
> Hi Kalle,
>
> Here's the second batch of patches intended for v5.12. This includes
> the four last patchsets I sent out for v5.12. Usual development work.
> More details about the contents in the tag description.
>
> Please let me know if there are any issues.
>
> Cheers,
> Luca.
>
>
> The following changes since commit 8e79106a7dbbfcb9e87644d0ee1d038670fba844:
>
> rtlwifi: rtl8821ae: phy: Simplify bool comparison (2021-02-10 09:39:35 +0200)
>
> are available in the Git repository at:
>
> git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next.git tags/iwlwifi-next-for-kalle-2021-02-10
>
> for you to fetch changes up to 000735e5dbbb739ca3742413858c1d9cac899e10:
>
> iwlwifi: bump FW API to 62 for AX devices (2021-02-11 01:58:23 +0200)
>
> ----------------------------------------------------------------
> Second set of iwlwifi patches intended for v5.12
>
> * Add some device IDs that got lost in a rebase;
> * A bunch of fixes in the PPAG code;
> * A few fixes in the debugging framework;
> * Fix a couple of potential crashes in error paths;
> * More HW IDs for new HW;
> * Add one more value to the device configuration code;
> * Support new scan config FW API;
> * Some more CSA fixes;
> * Support for RF interference mitigation (RFI);
> * Improvements in the NVM flows;
> * Bump the FW API support version;
> * Implement support for PNVM from BIOS;
> * Fix PM status when a FW crash happens;
> * Some other small fixes, clean-ups and improvements.
>
> ----------------------------------------------------------------
> Abhishek Naik (1):
> iwlwifi: mvm: Check ret code for iwl_mvm_load_nvm_to_nic
>
> Emmanuel Grumbach (7):
> iwlwifi: mvm: enhance a print in CSA flows
> iwlwifi: pcie: NULLify pointers after free
> iwlwifi: pcie: don't crash when rx queues aren't allocated in interrupt
> iwlwifi: mvm: register to mac80211 last
> iwlwifi: mvm: simplify iwl_mvm_dbgfs_register
> iwlwifi: mvm: isolate the get nvm flow
> iwlwifi: mvm: get NVM later in the mvm_start flow
>
> Golan Ben Ami (1):
> iwlwifi: mvm: reduce the print severity of failing getting NIC temp
>
> Gregory Greenman (2):
> iwlwifi: mvm: add RFI-M support
> iwlwifi: acpi: add support for DSM RFI
>
> Haim Dreyfuss (1):
> iwlwifi: acpi: don't return valid pointer as an ERR_PTR
>
> Ihab Zhaika (1):
> iwlwifi: add new cards for So and Qu family
>
> Ilan Peer (1):
> iwlwifi: mvm: Support SCAN_CFG_CMD version 5
>
> Johannes Berg (6):
> iwlwifi: pcie: don't disable interrupts for reg_lock
> iwlwifi: mvm: remove useless iwl_mvm_resume_d3() function
> iwlwifi: api: clean up some documentation/bits
> iwlwifi: remove flags argument for nic_access
> iwlwifi: remove max_vht_ampdu_exponent config parameter
> iwlwifi: remove max_ht_ampdu_exponent config parameter
>
> Luca Coelho (11):
> iwlwifi: pcie: add a few missing entries for So with Hr
> iwlwifi: acpi: fix PPAG table sizes
> iwlwifi: mvm: fix the type we use in the PPAG table validity checks
> iwlwifi: mvm: store PPAG enabled/disabled flag properly
> iwlwifi: mvm: send stored PPAG command instead of local
> iwlwifi: mvm: assign SAR table revision to the command later
> iwlwifi: pnvm: set the PNVM again if it was already loaded
> iwlwifi: pnvm: increment the pointer before checking the TLV
> iwlwifi: pnvm: move file loading code to a separate function
> iwlwifi: pnvm: implement reading PNVM from UEFI
> iwlwifi: bump FW API to 62 for AX devices
>
> Matti Gottlieb (4):
> iwlwifi: pcie: Change Ma device ID
> iwlwifi: pcie: add CDB bit to the device configuration parsing
> iwlwifi: pcie: add AX201 and AX211 radio modules for Ma devices
> iwlwifi: pcie: define FW_RESET_TIMEOUT for clarity
>
> Miri Korenblit (1):
> iwlwifi:mvm: Add support for version 2 of the LARI_CONFIG_CHANGE command.
>
> Mordechay Goodstein (4):
> iwlwifi: when HW has rate offload don't look at control field
> iwlwifi: dbg: remove unsupported regions
> iwlwifi: dbg: add op_mode callback for collecting debug data.
> iwlwifi: queue: add fake tx time point
>
> Mukesh Sisodiya (1):
> iwlwifi: correction of group-id once sending REPLY_ERROR
>
> Naftali Goldstein (1):
> iwlwifi: declare support for triggered SU/MU beamforming feedback
>
> Ravi Darsi (1):
> iwlwifi: mvm: global PM mode does not reset after FW crash
>
> Sara Sharon (1):
> iwlwifi: mvm: don't check if CSA event is running before removing
>
> Shaul Triebitz (1):
> iwlmvm: set properly NIC_NOT_ACK_ENABLED flag
>
> Takashi Iwai (1):
> iwlwifi: dbg: Mark ucode tlv data as const
>
> drivers/net/wireless/intel/iwlwifi/cfg/1000.c | 8 ++--
> drivers/net/wireless/intel/iwlwifi/cfg/2000.c | 14 +++----
> drivers/net/wireless/intel/iwlwifi/cfg/22000.c | 43 ++++++++++++++++++++-
> drivers/net/wireless/intel/iwlwifi/cfg/5000.c | 8 ++--
> drivers/net/wireless/intel/iwlwifi/cfg/6000.c | 20 ++++------
> drivers/net/wireless/intel/iwlwifi/cfg/7000.c | 3 +-
> drivers/net/wireless/intel/iwlwifi/cfg/8000.c | 6 +--
> drivers/net/wireless/intel/iwlwifi/cfg/9000.c | 1 -
> drivers/net/wireless/intel/iwlwifi/dvm/main.c | 10 ++---
> drivers/net/wireless/intel/iwlwifi/dvm/tt.c | 7 ++--
> drivers/net/wireless/intel/iwlwifi/fw/acpi.c | 50 ++++++++++++++++++------
> drivers/net/wireless/intel/iwlwifi/fw/acpi.h | 24 +++++++++---
> drivers/net/wireless/intel/iwlwifi/fw/api/commands.h | 12 +++++-
> drivers/net/wireless/intel/iwlwifi/fw/api/location.h | 7 +++-
> drivers/net/wireless/intel/iwlwifi/fw/api/mac.h | 5 +++
> drivers/net/wireless/intel/iwlwifi/fw/api/nvm-reg.h | 15 +++++++-
> drivers/net/wireless/intel/iwlwifi/fw/api/rfi.h | 60 +++++++++++++++++++++++++++++
> drivers/net/wireless/intel/iwlwifi/fw/api/scan.h | 5 ++-
> drivers/net/wireless/intel/iwlwifi/fw/api/tx.h | 4 +-
> drivers/net/wireless/intel/iwlwifi/fw/dbg.c | 54 ++++++++++++--------------
> drivers/net/wireless/intel/iwlwifi/fw/file.h | 1 +
> drivers/net/wireless/intel/iwlwifi/fw/pnvm.c | 190 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++------------------
> drivers/net/wireless/intel/iwlwifi/iwl-config.h | 14 ++++---
> drivers/net/wireless/intel/iwlwifi/iwl-csr.h | 2 +
> drivers/net/wireless/intel/iwlwifi/iwl-dbg-tlv.c | 86 ++++++++++++++++++++++++++++++------------
> drivers/net/wireless/intel/iwlwifi/iwl-dbg-tlv.h | 6 ++-
> drivers/net/wireless/intel/iwlwifi/iwl-drv.c | 2 +-
> drivers/net/wireless/intel/iwlwifi/iwl-eeprom-parse.c | 2 +-
> drivers/net/wireless/intel/iwlwifi/iwl-io.c | 46 +++++++++--------------
> drivers/net/wireless/intel/iwlwifi/iwl-nvm-parse.c | 6 +--
> drivers/net/wireless/intel/iwlwifi/iwl-nvm-parse.h | 1 +
> drivers/net/wireless/intel/iwlwifi/iwl-op-mode.h | 14 ++++++-
> drivers/net/wireless/intel/iwlwifi/iwl-trans.c | 7 +++-
> drivers/net/wireless/intel/iwlwifi/iwl-trans.h | 14 +++----
> drivers/net/wireless/intel/iwlwifi/mvm/Makefile | 1 +
> drivers/net/wireless/intel/iwlwifi/mvm/d3.c | 8 +---
> drivers/net/wireless/intel/iwlwifi/mvm/debugfs.c | 90 +++++++++++++++++++++++++++++++++++++-------
> drivers/net/wireless/intel/iwlwifi/mvm/fw-api.h | 3 +-
> drivers/net/wireless/intel/iwlwifi/mvm/fw.c | 116 +++++++++++++++++++++++++++++++++++++++++++-------------
> drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c | 19 +++++++++-
> drivers/net/wireless/intel/iwlwifi/mvm/mvm.h | 15 ++++++--
> drivers/net/wireless/intel/iwlwifi/mvm/ops.c | 79 +++++++++++++++++++++++++++-----------
> drivers/net/wireless/intel/iwlwifi/mvm/rfi.c | 118 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> drivers/net/wireless/intel/iwlwifi/mvm/scan.c | 14 ++++---
> drivers/net/wireless/intel/iwlwifi/mvm/time-event.c | 3 --
> drivers/net/wireless/intel/iwlwifi/mvm/tt.c | 2 +-
> drivers/net/wireless/intel/iwlwifi/mvm/tx.c | 22 ++++++-----
> drivers/net/wireless/intel/iwlwifi/pcie/ctxt-info-gen3.c | 21 ++++++-----
> drivers/net/wireless/intel/iwlwifi/pcie/drv.c | 188 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++-----------------------------------
> drivers/net/wireless/intel/iwlwifi/pcie/rx.c | 16 +++++---
> drivers/net/wireless/intel/iwlwifi/pcie/trans-gen2.c | 8 +++-
> drivers/net/wireless/intel/iwlwifi/pcie/trans.c | 54 +++++++++++++-------------
> drivers/net/wireless/intel/iwlwifi/pcie/tx-gen2.c | 5 +--
> drivers/net/wireless/intel/iwlwifi/pcie/tx.c | 27 ++++++-------
> drivers/net/wireless/intel/iwlwifi/queue/tx.c | 4 ++
> 55 files changed, 1116 insertions(+), 444 deletions(-)
> create mode 100644 drivers/net/wireless/intel/iwlwifi/fw/api/rfi.h
> create mode 100644 drivers/net/wireless/intel/iwlwifi/mvm/rfi.c
Pulled, thanks.
30357f6a47e0 Merge tag 'iwlwifi-next-for-kalle-2021-02-10' of git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next
--
https://patchwork.kernel.org/project/linux-wireless/patch/8fc242539c12e702080789efd0e2f333d2c13bfd.camel@coelho.fi/
https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches
prev parent reply other threads:[~2021-02-11 18:54 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-02-11 0:06 pull-request: iwlwifi-next 2021-02-10 Luca Coelho
2021-02-11 18:43 ` Kalle Valo [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210211184316.A9B7AC433C6@smtp.codeaurora.org \
--to=kvalo@codeaurora.org \
--cc=linux-wireless@vger.kernel.org \
--cc=luca@coelho.fi \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).