[ 0.000000] microcode: microcode updated early to revision 0x2d, date = 2019-03-07 [ 0.000000] Linux version 5.2.4 (peter@tweek) (gcc version 6.3.0 20170516 (Debian 6.3.0-18+deb9u1)) #1 SMP Sun Jul 28 10:37:15 CEST 2019 [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-5.2.4 root=/dev/mapper/terrence--hg6-root ro sysrq_always_enabled vt.default_red=238,220,133,181,38,211,42,7,253,203,147,131,101,108,88,0 vt.default_grn=232,50,153,137,139,54,161,54,246,75,161,148,123,113,110,43 vt.default_blu=213,47,0,0,210,130,152,66,227,22,161,150,131,196,117,54 vt.color=0x89 [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009bfff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009c000-0x000000000009cfff] reserved [ 0.000000] BIOS-e820: [mem 0x000000000009d000-0x000000000009dfff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cb231fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000cb232000-0x00000000cb431fff] type 20 [ 0.000000] BIOS-e820: [mem 0x00000000cb432000-0x00000000ccbfefff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ccbff000-0x00000000ccd7efff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000ccd7f000-0x00000000ccdfefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000ccdff000-0x00000000ccdfffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000f80f8000-0x00000000f80f8fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000022effffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] efi: EFI v2.31 by Lenovo [ 0.000000] efi: ACPI=0xccdfe000 ACPI 2.0=0xccdfe014 SMBIOS=0xccbbc000 ESRT=0xcbb56000 [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: LENOVO 20DL000SMH/20DL000SMH, BIOS JEET85WW (1.34 ) 10/11/2018 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 2394.673 MHz processor [ 0.000108] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000110] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000115] last_pfn = 0x22f000 max_arch_pfn = 0x400000000 [ 0.000120] MTRR default type: write-back [ 0.000121] MTRR fixed ranges enabled: [ 0.000122] 00000-9FFFF write-back [ 0.000122] A0000-BFFFF uncachable [ 0.000123] C0000-FFFFF write-protect [ 0.000124] MTRR variable ranges enabled: [ 0.000125] 0 base 00E0000000 mask 7FE0000000 uncachable [ 0.000126] 1 base 00D0000000 mask 7FF0000000 uncachable [ 0.000127] 2 base 00CE000000 mask 7FFE000000 uncachable [ 0.000127] 3 base 00CD000000 mask 7FFF000000 uncachable [ 0.000128] 4 base 00CCE00000 mask 7FFFE00000 uncachable [ 0.000129] 5 disabled [ 0.000129] 6 disabled [ 0.000130] 7 disabled [ 0.000130] 8 disabled [ 0.000130] 9 disabled [ 0.001119] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.001507] last_pfn = 0xcce00 max_arch_pfn = 0x400000000 [ 0.010451] esrt: Reserving ESRT space from 0x00000000cbb56000 to 0x00000000cbb56060. [ 0.010459] Using GB pages for direct mapping [ 0.010461] BRK [0x10d601000, 0x10d601fff] PGTABLE [ 0.010463] BRK [0x10d602000, 0x10d602fff] PGTABLE [ 0.010464] BRK [0x10d603000, 0x10d603fff] PGTABLE [ 0.010512] BRK [0x10d604000, 0x10d604fff] PGTABLE [ 0.010513] BRK [0x10d605000, 0x10d605fff] PGTABLE [ 0.010737] BRK [0x10d606000, 0x10d606fff] PGTABLE [ 0.010791] BRK [0x10d607000, 0x10d607fff] PGTABLE [ 0.010872] BRK [0x10d608000, 0x10d608fff] PGTABLE [ 0.010953] Secure boot could not be determined [ 0.010954] RAMDISK: [mem 0x3493b000-0x36494fff] [ 0.010960] ACPI: Early table checksum verification disabled [ 0.010963] ACPI: RSDP 0x00000000CCDFE014 000024 (v02 LENOVO) [ 0.010966] ACPI: XSDT 0x00000000CCDFE1C0 0000D4 (v01 LENOVO TP-JE 00001340 PTEC 00000002) [ 0.010971] ACPI: FACP 0x00000000CCDFA000 00010C (v05 LENOVO TP-JE 00001340 PTEC 00000002) [ 0.010976] ACPI: DSDT 0x00000000CCDE3000 0125F8 (v02 LENOVO BDW 00000000 INTL 20120711) [ 0.010979] ACPI: FACS 0x00000000CCD67000 000040 [ 0.010982] ACPI: SLIC 0x00000000CCDFD000 000176 (v01 LENOVO TP-JE 00001340 PTEC 00000001) [ 0.010984] ACPI: ASF! 0x00000000CCDFC000 0000A5 (v32 LENOVO TP-JE 00001340 PTEC 00000002) [ 0.010987] ACPI: HPET 0x00000000CCDF9000 000038 (v01 LENOVO TP-JE 00001340 PTEC 00000002) [ 0.010990] ACPI: APIC 0x00000000CCDF8000 000098 (v01 LENOVO TP-JE 00001340 PTEC 00000002) [ 0.010993] ACPI: MCFG 0x00000000CCDF7000 00003C (v01 LENOVO TP-JE 00001340 PTEC 00000002) [ 0.010995] ACPI: WDAT 0x00000000CCDF6000 000104 (v01 LENOVO TP-JE 00001340 PTEC 00000002) [ 0.010998] ACPI: SSDT 0x00000000CCDDF000 00342F (v02 LENOVO PtidDevc 00001000 INTL 20120711) [ 0.011001] ACPI: SSDT 0x00000000CCDDE000 000539 (v02 LENOVO Cpu0Ist 00003000 INTL 20120711) [ 0.011004] ACPI: SSDT 0x00000000CCDDD000 000B74 (v02 LENOVO CpuSsdt 00003000 INTL 20120711) [ 0.011006] ACPI: SSDT 0x00000000CCDDC000 00043E (v02 LENOVO CtdpB 00001000 INTL 20120711) [ 0.011009] ACPI: SSDT 0x00000000CCDD6000 005DEA (v02 LENOVO SaSsdt 00003000 INTL 20120711) [ 0.011012] ACPI: SSDT 0x00000000CCDD5000 000394 (v02 LENOVO CppcTabl 00001000 INTL 20120711) [ 0.011014] ACPI: PCCT 0x00000000CCDD4000 00006E (v05 LENOVO TP-JE 00001340 PTEC 00000002) [ 0.011017] ACPI: SSDT 0x00000000CCDD3000 000AC4 (v02 LENOVO Cpc_Tabl 00001000 INTL 20120711) [ 0.011020] ACPI: UEFI 0x00000000CCDD2000 000042 (v01 LENOVO TP-JE 00001340 PTEC 00000002) [ 0.011023] ACPI: MSDM 0x00000000CCD41000 000055 (v03 LENOVO TP-JE 00001340 PTEC 00000002) [ 0.011025] ACPI: BATB 0x00000000CCDD1000 000046 (v01 LENOVO TP-JE 00001340 PTEC 00000002) [ 0.011028] ACPI: FPDT 0x00000000CCDD0000 000064 (v01 LENOVO TP-JE 00001340 PTEC 00000002) [ 0.011031] ACPI: UEFI 0x00000000CCDCF000 0002F6 (v01 LENOVO TP-JE 00001340 PTEC 00000002) [ 0.011034] ACPI: BGRT 0x00000000CCDCE000 000038 (v01 LENOVO TP-JE 00001340 PTEC 00000002) [ 0.011036] ACPI: DMAR 0x00000000CCDCD000 0000B0 (v01 LENOVO TP-JE 00001340 PTEC 00000002) [ 0.011043] ACPI: Local APIC address 0xfee00000 [ 0.011121] No NUMA configuration found [ 0.011123] Faking a node at [mem 0x0000000000000000-0x000000022effffff] [ 0.011127] NODE_DATA(0) allocated [mem 0x22effb000-0x22effffff] [ 0.011154] Zone ranges: [ 0.011155] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.011156] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.011157] Normal [mem 0x0000000100000000-0x000000022effffff] [ 0.011158] Device empty [ 0.011159] Movable zone start for each node [ 0.011160] Early memory node ranges [ 0.011161] node 0: [mem 0x0000000000001000-0x0000000000057fff] [ 0.011162] node 0: [mem 0x0000000000059000-0x000000000009bfff] [ 0.011163] node 0: [mem 0x000000000009d000-0x000000000009dfff] [ 0.011164] node 0: [mem 0x0000000000100000-0x00000000cb231fff] [ 0.011165] node 0: [mem 0x00000000ccdff000-0x00000000ccdfffff] [ 0.011166] node 0: [mem 0x0000000100000000-0x000000022effffff] [ 0.011409] Zeroed struct page in unavailable ranges: 20018 pages [ 0.011410] Initmem setup node 0 [mem 0x0000000000001000-0x000000022effffff] [ 0.011412] On node 0 totalpages: 2073038 [ 0.011413] DMA zone: 64 pages used for memmap [ 0.011414] DMA zone: 23 pages reserved [ 0.011414] DMA zone: 3995 pages, LIFO batch:0 [ 0.011471] DMA32 zone: 12937 pages used for memmap [ 0.011471] DMA32 zone: 827955 pages, LIFO batch:63 [ 0.023391] Normal zone: 19392 pages used for memmap [ 0.023393] Normal zone: 1241088 pages, LIFO batch:63 [ 0.039366] Reserving Intel graphics memory at [mem 0xce000000-0xcfffffff] [ 0.039436] ACPI: PM-Timer IO Port: 0x1808 [ 0.039438] ACPI: Local APIC address 0xfee00000 [ 0.039444] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.039445] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.039456] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39 [ 0.039458] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.039460] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.039461] ACPI: IRQ0 used by override. [ 0.039463] ACPI: IRQ9 used by override. [ 0.039465] Using ACPI (MADT) for SMP configuration information [ 0.039466] ACPI: HPET id: 0x8086a301 base: 0xfed00000 [ 0.039476] smpboot: Allowing 8 CPUs, 4 hotplug CPUs [ 0.039492] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.039493] PM: Registered nosave memory: [mem 0x00058000-0x00058fff] [ 0.039495] PM: Registered nosave memory: [mem 0x0009c000-0x0009cfff] [ 0.039497] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff] [ 0.039497] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff] [ 0.039499] PM: Registered nosave memory: [mem 0xcb232000-0xcb431fff] [ 0.039500] PM: Registered nosave memory: [mem 0xcb432000-0xccbfefff] [ 0.039501] PM: Registered nosave memory: [mem 0xccbff000-0xccd7efff] [ 0.039501] PM: Registered nosave memory: [mem 0xccd7f000-0xccdfefff] [ 0.039503] PM: Registered nosave memory: [mem 0xcce00000-0xcdffffff] [ 0.039504] PM: Registered nosave memory: [mem 0xce000000-0xcfffffff] [ 0.039505] PM: Registered nosave memory: [mem 0xd0000000-0xf80f7fff] [ 0.039505] PM: Registered nosave memory: [mem 0xf80f8000-0xf80f8fff] [ 0.039506] PM: Registered nosave memory: [mem 0xf80f9000-0xfed1bfff] [ 0.039507] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.039508] PM: Registered nosave memory: [mem 0xfed20000-0xffffffff] [ 0.039510] [mem 0xd0000000-0xf80f7fff] available for PCI devices [ 0.039511] Booting paravirtualized kernel on bare hardware [ 0.039514] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.131156] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1 [ 0.131445] percpu: Embedded 53 pages/cpu s176856 r8192 d32040 u262144 [ 0.131453] pcpu-alloc: s176856 r8192 d32040 u262144 alloc=1*2097152 [ 0.131454] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.131474] Built 1 zonelists, mobility grouping on. Total pages: 2040622 [ 0.131475] Policy zone: Normal [ 0.131477] Kernel command line: BOOT_IMAGE=/vmlinuz-5.2.4 root=/dev/mapper/terrence--hg6-root ro sysrq_always_enabled vt.default_red=238,220,133,181,38,211,42,7,253,203,147,131,101,108,88,0 vt.default_grn=232,50,153,137,139,54,161,54,246,75,161,148,123,113,110,43 vt.default_blu=213,47,0,0,210,130,152,66,227,22,161,150,131,196,117,54 vt.color=0x89 [ 0.131517] sysrq: sysrq always enabled. [ 0.136961] Calgary: detecting Calgary via BIOS EBDA area [ 0.136962] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.157853] Memory: 7967632K/8292152K available (10243K kernel code, 1186K rwdata, 3264K rodata, 1640K init, 2200K bss, 324520K reserved, 0K cma-reserved) [ 0.157985] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.157997] Kernel/User page tables isolation: enabled [ 0.158011] ftrace: allocating 32598 entries in 128 pages [ 0.170779] rcu: Hierarchical RCU implementation. [ 0.170781] rcu: RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8. [ 0.170782] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.170783] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.174026] NR_IRQS: 33024, nr_irqs: 760, preallocated irqs: 16 [ 0.174272] random: get_random_bytes called from start_kernel+0x334/0x514 with crng_init=0 [ 0.174293] Console: colour dummy device 80x25 [ 0.174477] printk: console [tty0] enabled [ 0.174494] ACPI: Core revision 20190509 [ 0.174759] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.174768] hpet clockevent registered [ 0.174772] APIC: Switch to symmetric I/O mode setup [ 0.174775] DMAR: Host address width 39 [ 0.174777] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 [ 0.174782] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e1ff0505e [ 0.174785] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 [ 0.174789] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c20660462 ecap f010da [ 0.174792] DMAR: RMRR base: 0x000000cc91e000 end: 0x000000cc934fff [ 0.174794] DMAR: RMRR base: 0x000000cd800000 end: 0x000000cfffffff [ 0.174797] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1 [ 0.174799] DMAR-IR: HPET id 0 under DRHD base 0xfed91000 [ 0.174801] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit. [ 0.174801] DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting. [ 0.175267] DMAR-IR: Enabled IRQ remapping in xapic mode [ 0.175270] x2apic: IRQ remapping doesn't support X2APIC mode [ 0.175843] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.194772] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x22848f45c51, max_idle_ns: 440795236517 ns [ 0.194778] Calibrating delay loop (skipped), value calculated using timer frequency.. 4789.34 BogoMIPS (lpj=9578692) [ 0.194782] pid_max: default: 32768 minimum: 301 [ 0.201368] LSM: Security Framework initializing [ 0.201376] Yama: becoming mindful. [ 0.201401] AppArmor: AppArmor initialized [ 0.201404] TOMOYO Linux initialized [ 0.203529] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.204086] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.204120] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.204138] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.204284] *** VALIDATE proc *** [ 0.204332] *** VALIDATE cgroup1 *** [ 0.204335] *** VALIDATE cgroup2 *** [ 0.204385] mce: CPU0: Thermal monitoring enabled (TM1) [ 0.204398] process: using mwait in idle threads [ 0.204401] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 [ 0.204403] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 [ 0.204406] Spectre V2 : Mitigation: Full generic retpoline [ 0.204408] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.204410] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.204414] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.204416] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl [ 0.204419] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp [ 0.204424] MDS: Mitigation: Clear CPU buffers [ 0.204657] Freeing SMP alternatives memory: 24K [ 0.206841] TSC deadline timer enabled [ 0.206843] smpboot: CPU0: Intel(R) Core(TM) i7-5500U CPU @ 2.40GHz (family: 0x6, model: 0x3d, stepping: 0x4) [ 0.206930] Performance Events: PEBS fmt2+, Broadwell events, 16-deep LBR, full-width counters, Intel PMU driver. [ 0.206952] ... version: 3 [ 0.206953] ... bit width: 48 [ 0.206954] ... generic registers: 4 [ 0.206956] ... value mask: 0000ffffffffffff [ 0.206958] ... max period: 00007fffffffffff [ 0.206959] ... fixed-purpose events: 3 [ 0.206961] ... event mask: 000000070000000f [ 0.206996] rcu: Hierarchical SRCU implementation. [ 0.207856] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.207925] smp: Bringing up secondary CPUs ... [ 0.207994] x86: Booting SMP configuration: [ 0.207996] .... node #0, CPUs: #1 [ 0.209052] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. [ 0.209052] #2 #3 [ 0.211640] smp: Brought up 1 node, 4 CPUs [ 0.211640] smpboot: Max logical packages: 2 [ 0.211640] smpboot: Total of 4 processors activated (19157.38 BogoMIPS) [ 0.215017] devtmpfs: initialized [ 0.215017] x86/mm: Memory block size: 128MB [ 0.215420] PM: Registering ACPI NVS region [mem 0xccbff000-0xccd7efff] (1572864 bytes) [ 0.215420] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.215420] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.215420] pinctrl core: initialized pinctrl subsystem [ 0.215420] NET: Registered protocol family 16 [ 0.215420] audit: initializing netlink subsys (disabled) [ 0.215420] audit: type=2000 audit(1564396741.040:1): state=initialized audit_enabled=0 res=1 [ 0.215420] cpuidle: using governor ladder [ 0.215420] cpuidle: using governor menu [ 0.215420] Detected 1 PCC Subspaces [ 0.215420] Registering PCC driver as Mailbox controller [ 0.215420] ACPI: bus type PCI registered [ 0.215420] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.215420] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.215420] PCI: not using MMCONFIG [ 0.215420] PCI: Using configuration type 1 for base access [ 0.215420] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.215420] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.215420] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.651092] alg: No test for lzo-rle (lzo-rle-generic) [ 0.651092] alg: No test for lzo-rle (lzo-rle-scomp) [ 0.651092] ACPI: Added _OSI(Module Device) [ 0.651092] ACPI: Added _OSI(Processor Device) [ 0.651092] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.651092] ACPI: Added _OSI(Processor Aggregator Device) [ 0.651092] ACPI: Added _OSI(Linux-Dell-Video) [ 0.651092] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.651092] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 0.678145] ACPI: 8 ACPI AML tables successfully acquired and loaded [ 0.680076] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.685406] ACPI: Dynamic OEM Table Load: [ 0.685416] ACPI: SSDT 0xFFFF968964D18C00 0003D3 (v02 PmRef Cpu0Cst 00003001 INTL 20120711) [ 0.685923] ACPI: Dynamic OEM Table Load: [ 0.685931] ACPI: SSDT 0xFFFF968964CEF800 0005AA (v02 PmRef ApIst 00003000 INTL 20120711) [ 0.686467] ACPI: Dynamic OEM Table Load: [ 0.686473] ACPI: SSDT 0xFFFF968964CFB800 000119 (v02 PmRef ApCst 00003000 INTL 20120711) [ 0.687477] ACPI: EC: EC started [ 0.687480] ACPI: EC: interrupt blocked [ 0.687946] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC [ 0.687949] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x27, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.687952] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC used to handle transactions [ 0.687954] ACPI: Interpreter enabled [ 0.687999] ACPI: (supports S0 S3 S4 S5) [ 0.688001] ACPI: Using IOAPIC for interrupt routing [ 0.688033] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.688483] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI motherboard resources [ 0.688494] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.688729] ACPI: Enabled 9 GPEs in block 00 to 7F [ 0.689395] ACPI: Power Resource [PG00] (on) [ 0.689785] ACPI: Power Resource [PG01] (on) [ 0.690163] ACPI: Power Resource [PG02] (on) [ 0.693373] ACPI: Power Resource [PUBS] (off) [ 0.694031] ACPI: Power Resource [PUBS] (off) [ 0.698332] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.698339] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.698455] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM [ 0.699175] PCI host bridge to bus 0000:00 [ 0.699179] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.699181] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.699184] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.699186] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window] [ 0.699189] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window] [ 0.699191] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window] [ 0.699194] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window] [ 0.699196] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window] [ 0.699198] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window] [ 0.699201] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window] [ 0.699203] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window] [ 0.699206] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xfeafffff window] [ 0.699209] pci_bus 0000:00: root bus resource [bus 00-3e] [ 0.699217] pci 0000:00:00.0: [8086:1604] type 00 class 0x060000 [ 0.699480] pci 0000:00:02.0: [8086:1616] type 00 class 0x030000 [ 0.699493] pci 0000:00:02.0: reg 0x10: [mem 0xf0000000-0xf0ffffff 64bit] [ 0.699500] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.699506] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f] [ 0.699520] pci 0000:00:02.0: BAR 2: assigned to efifb [ 0.699765] pci 0000:00:03.0: [8086:160c] type 00 class 0x040300 [ 0.699776] pci 0000:00:03.0: reg 0x10: [mem 0xf1210000-0xf1213fff 64bit] [ 0.700054] pci 0000:00:14.0: [8086:9cb1] type 00 class 0x0c0330 [ 0.700074] pci 0000:00:14.0: reg 0x10: [mem 0xf1200000-0xf120ffff 64bit] [ 0.700131] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.700376] pci 0000:00:16.0: [8086:9cba] type 00 class 0x078000 [ 0.700400] pci 0000:00:16.0: reg 0x10: [mem 0xf1219000-0xf121901f 64bit] [ 0.700467] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.700726] pci 0000:00:1b.0: [8086:9ca0] type 00 class 0x040300 [ 0.700746] pci 0000:00:1b.0: reg 0x10: [mem 0xf1214000-0xf1217fff 64bit] [ 0.700802] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.701054] pci 0000:00:1c.0: [8086:9c90] type 01 class 0x060400 [ 0.701129] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.701403] pci 0000:00:1c.2: [8086:9c94] type 01 class 0x060400 [ 0.701482] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.701753] pci 0000:00:1c.3: [8086:9c96] type 01 class 0x060400 [ 0.701831] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.702107] pci 0000:00:1d.0: [8086:9ca6] type 00 class 0x0c0320 [ 0.702130] pci 0000:00:1d.0: reg 0x10: [mem 0xf121d000-0xf121d3ff] [ 0.702213] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.702463] pci 0000:00:1f.0: [8086:9cc3] type 00 class 0x060100 [ 0.702818] pci 0000:00:1f.2: [8086:9c83] type 00 class 0x010601 [ 0.702834] pci 0000:00:1f.2: reg 0x10: [io 0x3088-0x308f] [ 0.702841] pci 0000:00:1f.2: reg 0x14: [io 0x3094-0x3097] [ 0.702848] pci 0000:00:1f.2: reg 0x18: [io 0x3080-0x3087] [ 0.702856] pci 0000:00:1f.2: reg 0x1c: [io 0x3090-0x3093] [ 0.702863] pci 0000:00:1f.2: reg 0x20: [io 0x3060-0x307f] [ 0.702870] pci 0000:00:1f.2: reg 0x24: [mem 0xf121c000-0xf121c7ff] [ 0.702905] pci 0000:00:1f.2: PME# supported from D3hot [ 0.703144] pci 0000:00:1f.3: [8086:9ca2] type 00 class 0x0c0500 [ 0.703162] pci 0000:00:1f.3: reg 0x10: [mem 0xf1218000-0xf12180ff 64bit] [ 0.703181] pci 0000:00:1f.3: reg 0x20: [io 0xefa0-0xefbf] [ 0.703441] pci 0000:00:1f.6: [8086:9ca4] type 00 class 0x118000 [ 0.703476] pci 0000:00:1f.6: reg 0x10: [mem 0xf121b000-0xf121bfff 64bit] [ 0.703848] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.704103] pci 0000:04:00.0: [8086:095b] type 00 class 0x028000 [ 0.704209] pci 0000:04:00.0: reg 0x10: [mem 0xf1100000-0xf1101fff 64bit] [ 0.704555] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold [ 0.705096] pci 0000:00:1c.2: PCI bridge to [bus 04] [ 0.705101] pci 0000:00:1c.2: bridge window [mem 0xf1100000-0xf11fffff] [ 0.705172] pci 0000:05:00.0: [10ec:5227] type 00 class 0xff0000 [ 0.705206] pci 0000:05:00.0: reg 0x10: [mem 0xf1000000-0xf1000fff] [ 0.705366] pci 0000:05:00.0: supports D1 D2 [ 0.705368] pci 0000:05:00.0: PME# supported from D1 D2 D3hot D3cold [ 0.705514] pci 0000:00:1c.3: PCI bridge to [bus 05] [ 0.705519] pci 0000:00:1c.3: bridge window [mem 0xf1000000-0xf10fffff] [ 0.706212] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.706258] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.706301] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.706344] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.706386] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.706428] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.706470] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.706512] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.706925] ACPI: EC: interrupt unblocked [ 0.706937] ACPI: EC: event unblocked [ 0.706944] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x27, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.706947] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC used to handle transactions and events [ 0.707011] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=mem,locks=none [ 0.707011] pci 0000:00:02.0: vgaarb: bridge control possible [ 0.707011] pci 0000:00:02.0: vgaarb: setting as boot device [ 0.707011] vgaarb: loaded [ 0.707011] pps_core: LinuxPPS API ver. 1 registered [ 0.707011] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.707011] PTP clock support registered [ 0.707011] EDAC MC: Ver: 3.0.0 [ 0.707067] Registered efivars operations [ 0.886846] PCI: Using ACPI for IRQ routing [ 0.887596] PCI: pci_cache_line_size set to 64 bytes [ 0.887927] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff] [ 0.887928] e820: reserve RAM buffer [mem 0x0009c000-0x0009ffff] [ 0.887929] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff] [ 0.887930] e820: reserve RAM buffer [mem 0xcb232000-0xcbffffff] [ 0.887931] e820: reserve RAM buffer [mem 0xcce00000-0xcfffffff] [ 0.887931] e820: reserve RAM buffer [mem 0x22f000000-0x22fffffff] [ 0.888031] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.888031] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.890779] clocksource: Switched to clocksource tsc-early [ 0.899759] VFS: Disk quotas dquot_6.6.0 [ 0.899780] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.899806] *** VALIDATE hugetlbfs *** [ 0.899898] AppArmor: AppArmor Filesystem Enabled [ 0.899915] pnp: PnP ACPI init [ 0.900128] system 00:00: [io 0x0680-0x069f] has been reserved [ 0.900132] system 00:00: [io 0xffff] has been reserved [ 0.900134] system 00:00: [io 0xffff] has been reserved [ 0.900136] system 00:00: [io 0xffff] has been reserved [ 0.900139] system 00:00: [io 0x1800-0x18fe] has been reserved [ 0.900141] system 00:00: [io 0x164e-0x164f] has been reserved [ 0.900147] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.900195] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.900234] system 00:02: [io 0x1854-0x1857] has been reserved [ 0.900239] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.900282] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.900417] pnp 00:04: Plug and Play ACPI device, IDs LEN200b PNP0f13 (active) [ 0.900637] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.900641] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.900643] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.900646] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.900649] system 00:05: [mem 0xf8000000-0xfbffffff] could not be reserved [ 0.900652] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.900655] system 00:05: [mem 0xfed90000-0xfed93fff] could not be reserved [ 0.900657] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.900660] system 00:05: [mem 0xff000000-0xff000fff] has been reserved [ 0.900663] system 00:05: [mem 0xff010000-0xffffffff] has been reserved [ 0.900665] system 00:05: [mem 0xfee00000-0xfeefffff] has been reserved [ 0.900668] system 00:05: [mem 0xd0010000-0xd001ffff] has been reserved [ 0.900670] system 00:05: [mem 0xd0000000-0xd000ffff] has been reserved [ 0.900675] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.900870] pnp: PnP ACPI: found 6 devices [ 0.906467] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.906479] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.906489] pci 0000:00:1c.2: PCI bridge to [bus 04] [ 0.906494] pci 0000:00:1c.2: bridge window [mem 0xf1100000-0xf11fffff] [ 0.906501] pci 0000:00:1c.3: PCI bridge to [bus 05] [ 0.906506] pci 0000:00:1c.3: bridge window [mem 0xf1000000-0xf10fffff] [ 0.906514] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.906517] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.906519] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.906521] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window] [ 0.906523] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window] [ 0.906526] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window] [ 0.906528] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window] [ 0.906530] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window] [ 0.906533] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window] [ 0.906535] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window] [ 0.906537] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window] [ 0.906540] pci_bus 0000:00: resource 15 [mem 0xd0000000-0xfeafffff window] [ 0.906542] pci_bus 0000:04: resource 1 [mem 0xf1100000-0xf11fffff] [ 0.906545] pci_bus 0000:05: resource 1 [mem 0xf1000000-0xf10fffff] [ 0.906652] NET: Registered protocol family 2 [ 0.906792] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes) [ 0.906821] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 0.906926] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.907035] TCP: Hash tables configured (established 65536 bind 65536) [ 0.907073] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.907096] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.907154] NET: Registered protocol family 1 [ 0.907167] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.907243] pci 0000:00:14.0: can't derive routing for PCI INT A [ 0.907245] pci 0000:00:14.0: PCI INT A: not connected [ 0.907596] PCI: CLS 64 bytes, default 64 [ 0.907630] Trying to unpack rootfs image as initramfs... [ 1.354608] Freeing initrd memory: 28008K [ 1.370805] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.370809] software IO TLB: mapped [mem 0xc01f0000-0xc41f0000] (64MB) [ 1.371463] Initialise system trusted keyrings [ 1.371504] workingset: timestamp_bits=40 max_order=21 bucket_order=0 [ 1.372729] zbud: loaded [ 1.372981] Key type asymmetric registered [ 1.372984] Asymmetric key parser 'x509' registered [ 1.372991] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 1.373029] io scheduler mq-deadline registered [ 1.373617] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 1.373638] efifb: probing for efifb [ 1.373654] efifb: framebuffer at 0xe0000000, using 8128k, total 8128k [ 1.373656] efifb: mode is 1920x1080x32, linelength=7680, pages=1 [ 1.373658] efifb: scrolling: redraw [ 1.373660] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 1.377759] Console: switching to colour frame buffer device 240x67 [ 1.381794] fb0: EFI VGA frame buffer device [ 1.381817] intel_idle: MWAIT substates: 0x11142120 [ 1.381818] intel_idle: v0.4.1 model 0x3D [ 1.382038] intel_idle: lapic_timer_reliable_states 0xffffffff [ 1.382582] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.383206] Linux agpgart interface v0.103 [ 1.383267] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel [ 1.383290] AMD-Vi: AMD IOMMUv2 functionality not available on this system [ 1.383581] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 1.407337] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.407358] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.407490] mousedev: PS/2 mouse device common for all mice [ 1.407542] rtc_cmos 00:01: RTC can wake from S4 [ 1.407715] rtc_cmos 00:01: registered as rtc0 [ 1.407744] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 1.407780] intel_pstate: Intel P-state driver initializing [ 1.408024] ledtrig-cpu: registered to indicate activity on CPUs [ 1.409193] NET: Registered protocol family 10 [ 1.418282] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 1.423489] Segment Routing with IPv6 [ 1.423531] mip6: Mobile IPv6 [ 1.423543] NET: Registered protocol family 17 [ 1.423561] mpls_gso: MPLS GSO support [ 1.423874] mce: Using 7 MCE banks [ 1.423926] microcode: sig=0x306d4, pf=0x40, revision=0x2d [ 1.424061] microcode: Microcode Update Driver: v2.2. [ 1.424071] sched_clock: Marking stable (1423486189, 558034)->(1581032697, -156988474) [ 1.424481] registered taskstats version 1 [ 1.424496] Loading compiled-in X.509 certificates [ 1.424526] zswap: loaded using pool lzo/zbud [ 1.424624] AppArmor: AppArmor sha1 policy hashing enabled [ 1.425095] rtc_cmos 00:01: setting system clock to 2019-07-29T10:39:03 UTC (1564396743) [ 1.426244] Freeing unused kernel image memory: 1640K [ 1.442888] Write protecting the kernel read-only data: 16384k [ 1.443497] Freeing unused kernel image memory: 2036K [ 1.443735] Freeing unused kernel image memory: 832K [ 1.457554] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.457572] x86/mm: Checking user space page tables [ 1.464639] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.464657] Run /init as init process [ 1.518834] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 1.518933] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 1.518962] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 1.551223] acpi PNP0C14:01: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00) [ 1.555658] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 1.575617] SCSI subsystem initialized [ 1.577707] ACPI: bus type USB registered [ 1.579298] usbcore: registered new interface driver usbfs [ 1.581245] usbcore: registered new interface driver hub [ 1.582744] usbcore: registered new device driver usb [ 1.585874] cryptd: max_cpu_qlen set to 1000 [ 1.585879] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.586749] libata version 3.00 loaded. [ 1.588428] ehci-pci: EHCI PCI platform driver [ 1.590044] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 1.591491] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 1.592932] ehci-pci 0000:00:1d.0: debug port 2 [ 1.595602] ahci 0000:00:1f.2: version 3.0 [ 1.595773] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x1 impl SATA mode [ 1.595862] xhci_hcd 0000:00:14.0: can't derive routing for PCI INT A [ 1.596960] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst [ 1.597831] xhci_hcd 0000:00:14.0: PCI INT A: no GSI [ 1.598272] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 1.598289] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf121d000 [ 1.602799] scsi host0: ahci [ 1.602851] AVX2 version of gcm_enc/dec engaged. [ 1.604431] scsi host1: ahci [ 1.605640] AES CTR mode by8 optimization enabled [ 1.607184] scsi host2: ahci [ 1.609576] scsi host3: ahci [ 1.611034] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 1.611841] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.02 [ 1.612609] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.613479] usb usb1: Product: EHCI Host Controller [ 1.614235] usb usb1: Manufacturer: Linux 5.2.4 ehci_hcd [ 1.614870] ata1: SATA max UDMA/133 abar m2048@0xf121c000 port 0xf121c100 irq 46 [ 1.615185] usb usb1: SerialNumber: 0000:00:1d.0 [ 1.616597] ata2: DUMMY [ 1.618175] hub 1-0:1.0: USB hub found [ 1.619309] ata3: DUMMY [ 1.619310] ata4: DUMMY [ 1.620764] hub 1-0:1.0: 3 ports detected [ 1.623724] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.624686] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 1.626534] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x000000000004b810 [ 1.627331] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 1.628239] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.02 [ 1.629016] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.629811] usb usb2: Product: xHCI Host Controller [ 1.630579] usb usb2: Manufacturer: Linux 5.2.4 xhci-hcd [ 1.631376] usb usb2: SerialNumber: 0000:00:14.0 [ 1.632259] hub 2-0:1.0: USB hub found [ 1.633330] hub 2-0:1.0: 11 ports detected [ 1.636133] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.636906] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 1.637671] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 1.639132] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.02 [ 1.640289] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.641073] usb usb3: Product: xHCI Host Controller [ 1.641805] usb usb3: Manufacturer: Linux 5.2.4 xhci-hcd [ 1.642533] usb usb3: SerialNumber: 0000:00:14.0 [ 1.643864] hub 3-0:1.0: USB hub found [ 1.645133] hub 3-0:1.0: 4 ports detected [ 1.934540] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.937817] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 1.937822] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 1.941117] ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded [ 1.941562] ata1.00: supports DRM functions and may not be fully accessible [ 1.944442] ata1.00: ATA-9: TOSHIBA THNSFJ256GCSU, JULA1102, max UDMA/100 [ 1.947144] ata1.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.949392] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 1.949395] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 1.950818] ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded [ 1.951088] ata1.00: supports DRM functions and may not be fully accessible [ 1.953171] ata1.00: configured for UDMA/100 [ 1.954988] scsi 0:0:0:0: Direct-Access ATA TOSHIBA THNSFJ25 1102 PQ: 0 ANSI: 5 [ 1.957931] sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB) [ 1.959105] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.960218] sd 0:0:0:0: [sda] Write Protect is off [ 1.961320] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.961379] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.964258] sda: sda1 sda2 sda3 [ 1.965927] sd 0:0:0:0: [sda] supports TCG Opal [ 1.967026] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.970798] usb 2-1: new full-speed USB device number 2 using xhci_hcd [ 2.082792] raid6: avx2x4 gen() 25182 MB/s [ 2.115180] usb 1-1: New USB device found, idVendor=8087, idProduct=8001, bcdDevice= 0.03 [ 2.116115] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.117203] hub 1-1:1.0: USB hub found [ 2.118655] hub 1-1:1.0: 8 ports detected [ 2.119966] usb 2-1: New USB device found, idVendor=1209, idProduct=2440, bcdDevice= 2.00 [ 2.121579] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.123109] usb 2-1: Product: GnuK Token [ 2.124586] usb 2-1: Manufacturer: pid.codes [ 2.126028] usb 2-1: SerialNumber: FSIJ-1.2.13-87094336 [ 2.150780] raid6: avx2x4 xor() 17012 MB/s [ 2.178933] random: fast init done [ 2.218791] raid6: avx2x2 gen() 21920 MB/s [ 2.254793] usb 2-4: new full-speed USB device number 3 using xhci_hcd [ 2.286779] raid6: avx2x2 xor() 14348 MB/s [ 2.354779] raid6: avx2x1 gen() 18809 MB/s [ 2.358598] psmouse serio1: synaptics: queried max coordinates: x [..5712], y [..4780] [ 2.382795] tsc: Refined TSC clocksource calibration: 2394.453 MHz [ 2.384284] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2283bf4e6f2, max_idle_ns: 440795216136 ns [ 2.422783] raid6: avx2x1 xor() 10536 MB/s [ 2.490791] raid6: sse2x4 gen() 7819 MB/s [ 2.558798] raid6: sse2x4 xor() 5243 MB/s [ 2.626805] raid6: sse2x2 gen() 7718 MB/s [ 2.694806] raid6: sse2x2 xor() 4497 MB/s [ 2.762813] raid6: sse2x1 gen() 5759 MB/s [ 2.830823] raid6: sse2x1 xor() 4305 MB/s [ 2.832172] raid6: using algorithm avx2x4 gen() 25182 MB/s [ 2.833541] raid6: .... xor() 17012 MB/s, rmw enabled [ 2.834913] raid6: using avx2x2 recovery algorithm [ 2.836285] clocksource: Switched to clocksource tsc [ 2.836288] psmouse serio1: synaptics: queried min coordinates: x [1232..], y [1074..] [ 2.836289] usb 1-1.7: new full-speed USB device number 3 using ehci-pci [ 2.839341] psmouse serio1: synaptics: The touchpad can support a better bus than the too old PS/2 protocol. Make sure MOUSE_PS2_SYNAPTICS_SMBUS and RMI4_SMB are enabled to get a better touchpad experience. [ 2.839366] xor: automatically using best checksumming function avx [ 2.841238] async_tx: api initialized (async) [ 2.856153] usb 2-4: New USB device found, idVendor=8087, idProduct=0a2a, bcdDevice= 0.01 [ 2.857032] usb 2-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.883240] device-mapper: uevent: version 1.0.3 [ 2.884258] device-mapper: ioctl: 4.40.0-ioctl (2019-01-18) initialised: dm-devel@redhat.com [ 2.898130] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xf002a3/0x943300/0x12e800/0x10000, board id: 3075, fw id: 2560 [ 2.899445] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0 [ 2.938099] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input2 [ 2.950180] usb 1-1.7: New USB device found, idVendor=0483, idProduct=91d1, bcdDevice= 0.35 [ 2.950184] usb 1-1.7: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.950187] usb 1-1.7: Product: ST_SENSOR_HUB [ 2.950190] usb 1-1.7: Manufacturer: STMicroelectronics [ 2.950192] usb 1-1.7: SerialNumber: ST_SENSOR_HUB [ 2.957375] hidraw: raw HID events driver (C) Jiri Kosina [ 2.967373] usbcore: registered new interface driver usbhid [ 2.967374] usbhid: USB HID core driver [ 2.969019] hid-generic 0003:0483:91D1.0001: hiddev0,hidraw0: USB HID v1.10 Device [STMicroelectronics ST_SENSOR_HUB] on usb-0000:00:1d.0-1.7/input0 [ 2.986890] usb 2-5: new full-speed USB device number 4 using xhci_hcd [ 3.136504] usb 2-5: New USB device found, idVendor=06cb, idProduct=7244, bcdDevice= 0.05 [ 3.136509] usb 2-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.136511] usb 2-5: Product: Synaptics Touch Digitizer V04 [ 3.136514] usb 2-5: Manufacturer: SYNAPTICS [ 3.141237] input: SYNAPTICS Synaptics Touch Digitizer V04 Mouse as /devices/pci0000:00/0000:00:14.0/usb2/2-5/2-5:1.0/0003:06CB:7244.0002/input/input4 [ 3.141466] input: SYNAPTICS Synaptics Touch Digitizer V04 Touchscreen as /devices/pci0000:00/0000:00:14.0/usb2/2-5/2-5:1.0/0003:06CB:7244.0002/input/input5 [ 3.141903] hid-generic 0003:06CB:7244.0002: input,hiddev0,hidraw0: USB HID v1.11 Mouse [SYNAPTICS Synaptics Touch Digitizer V04] on usb-0000:00:14.0-5/input0 [ 3.566903] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3 [ 3.761905] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input3 [ 7.925906] random: crng init done [ 7.925909] random: 7 urandom warning(s) missed due to ratelimiting [ 11.463675] NET: Registered protocol family 38 [ 12.434194] Btrfs loaded, crc32c=crc32c-intel [ 12.511759] PM: Image not found (code -22) [ 12.571868] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null) [ 12.613828] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null) [ 12.669709] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. [ 13.023621] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN) [ 13.043035] systemd[1]: Detected architecture x86-64. [ 13.049010] systemd[1]: Set hostname to . [ 13.116562] systemd[1]: usr.mount: Unit is bound to inactive unit dev-terrence\x2dhg6-usr.device. Stopping, too. [ 13.132675] systemd[1]: ulogd2.service: Cannot add dependency job, ignoring: Unit ulogd2.service is masked. [ 13.134626] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 13.137403] systemd[1]: Created slice System Slice. [ 13.140857] systemd[1]: Mounting Debug File System... [ 13.145408] systemd[1]: Mounting RPC Pipe File System... [ 13.149240] systemd[1]: Reached target Libvirt guests shutdown. [ 13.162008] RPC: Registered named UNIX socket transport module. [ 13.162009] RPC: Registered udp transport module. [ 13.162010] RPC: Registered tcp transport module. [ 13.162010] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 13.188851] lp: driver loaded but no devices found [ 13.190323] ppdev: user-space parallel port driver [ 13.212178] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro [ 13.214809] EXT4-fs (dm-2): re-mounted. Opts: (null) [ 13.384894] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input7 [ 13.386785] ACPI: Power Button [PWRB] [ 13.388372] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input8 [ 13.390159] ACPI: Lid Switch [LID0] [ 13.391425] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input9 [ 13.393019] ACPI: Power Button [PWRF] [ 13.415705] ACPI: AC Adapter [ACAD] (on-line) [ 13.419577] intel-vbtn INT33D6:00: failed to read Intel Virtual Button driver [ 13.457102] Non-volatile memory driver v1.3 [ 13.474552] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 13.483515] EFI Variables Facility v0.08 2004-May-17 [ 13.486220] thinkpad_acpi: ThinkPad ACPI Extras v0.26 [ 13.486868] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 13.487798] thinkpad_acpi: http://ibm-acpi.sf.net/ [ 13.490847] thinkpad_acpi: ThinkPad BIOS JEET85WW (1.34 ), EC JEHT85WW [ 13.492319] thinkpad_acpi: Lenovo ThinkPad S1 Yoga 12, model 20DL000SMH [ 13.503223] thinkpad_acpi: Tablet mode switch found (type: GMMS), currently in laptop mode [ 13.505213] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver [ 13.506871] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default... [ 13.516244] input: PC Speaker as /devices/platform/pcspkr/input/input11 [ 13.528455] Error: Driver 'pcspkr' is already registered, aborting... [ 13.655945] snd_hda_codec_conexant hdaudioC1D0: CX20751/2: BIOS auto-probing. [ 13.657804] snd_hda_codec_conexant hdaudioC1D0: autoconfig for CX20751/2: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker [ 13.659493] snd_hda_codec_conexant hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 13.661220] snd_hda_codec_conexant hdaudioC1D0: hp_outs=1 (0x16/0x0/0x0/0x0/0x0) [ 13.662934] snd_hda_codec_conexant hdaudioC1D0: mono: mono_out=0x0 [ 13.664643] snd_hda_codec_conexant hdaudioC1D0: inputs: [ 13.668024] snd_hda_codec_conexant hdaudioC1D0: Internal Mic=0x1a [ 13.669732] snd_hda_codec_conexant hdaudioC1D0: Mic=0x19 [ 13.675059] snd_hda_codec_conexant hdaudioC1D0: Enable sync_write for stable communication [ 13.676964] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked [ 13.679055] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer [ 13.679892] ACPI: \_SB.PCI0.LPCB.EC0.ECRD: 1 arguments were passed to a non-method ACPI object (RegionField) (20190509/nsarguments-209) [ 13.680694] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules [ 13.749567] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 13.750760] RAPL PMU: hw unit of domain package 2^-14 Joules [ 13.754081] RAPL PMU: hw unit of domain dram 2^-14 Joules [ 13.757205] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 13.760938] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules [ 13.762612] cfg80211: failed to load regulatory.db [ 13.781780] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input12 [ 13.788037] i915 0000:00:02.0: enabling device (0006 -> 0007) [ 13.788714] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input13 [ 13.805355] checking generic (e0000000 7f0000) vs hw (e0000000 10000000) [ 13.805356] fb0: switching to inteldrmfb from EFI VGA [ 13.807479] Console: switching to colour dummy device 80x25 [ 13.807519] ACPI: \_SB.PCI0.LPCB.EC0.ECRD: 1 arguments were passed to a non-method ACPI object (RegionField) (20190509/nsarguments-209) [ 13.807597] i915 0000:00:02.0: vgaarb: deactivate vga console [ 13.807704] ACPI: \_SB.PCI0.LPCB.EC0.ECRD: 1 arguments were passed to a non-method ACPI object (RegionField) (20190509/nsarguments-209) [ 13.807729] ACPI: \_SB.PCI0.LPCB.EC0.ECRD: 1 arguments were passed to a non-method ACPI object (RegionField) (20190509/nsarguments-209) [ 13.807739] ACPI: \_SB.PCI0.LPCB.EC0.ECRD: 1 arguments were passed to a non-method ACPI object (RegionField) (20190509/nsarguments-209) [ 13.807748] ACPI: \_SB.PCI0.LPCB.EC0.ECRD: 1 arguments were passed to a non-method ACPI object (RegionField) (20190509/nsarguments-209) [ 13.807757] ACPI: \_SB.PCI0.LPCB.EC0.ECRD: 1 arguments were passed to a non-method ACPI object (RegionField) (20190509/nsarguments-209) [ 13.807778] ACPI: \_SB.PCI0.LPCB.EC0.ECRD: 1 arguments were passed to a non-method ACPI object (RegionField) (20190509/nsarguments-209) [ 13.807787] ACPI: \_SB.PCI0.LPCB.EC0.ECRD: 1 arguments were passed to a non-method ACPI object (RegionField) (20190509/nsarguments-209) [ 13.807866] ACPI: \_SB.PCI0.LPCB.EC0.ECRD: 1 arguments were passed to a non-method ACPI object (RegionField) (20190509/nsarguments-209) [ 13.807888] ACPI: \_SB.PCI0.LPCB.EC0.ECRD: 1 arguments were passed to a non-method ACPI object (RegionField) (20190509/nsarguments-209) [ 13.807905] ACPI: \_SB.PCI0.LPCB.EC0.ECRD: 1 arguments were passed to a non-method ACPI object (RegionField) (20190509/nsarguments-209) [ 13.811472] pstore: Using crash dump compression: deflate [ 13.814857] ACPI: \_SB.PCI0.LPCB.EC0.ECRD: 1 arguments were passed to a non-method ACPI object (RegionField) (20190509/nsarguments-209) [ 13.815929] ACPI: \_SB.PCI0.LPCB.EC0.ECRD: 1 arguments were passed to a non-method ACPI object (RegionField) (20190509/nsarguments-209) [ 13.816483] ACPI: \_SB.PCI0.LPCB.EC0.ECRD: 1 arguments were passed to a non-method ACPI object (RegionField) (20190509/nsarguments-209) [ 13.820296] ACPI: \_SB.PCI0.LPCB.EC0.ECRD: 1 arguments were passed to a non-method ACPI object (RegionField) (20190509/nsarguments-209) [ 13.823403] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 13.823407] [drm] Driver supports precise vblank timestamp query. [ 13.823436] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=mem [ 13.823445] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one [ 13.826992] Intel(R) Wireless WiFi driver for Linux [ 13.827153] Copyright(c) 2003- 2015 Intel Corporation [ 13.831624] ACPI: \_SB.PCI0.LPCB.EC0.ECRD: 1 arguments were passed to a non-method ACPI object (RegionField) (20190509/nsarguments-209) [ 13.833512] pstore: Registered efi as persistent store backend [ 13.838233] ACPI: \_SB.PCI0.LPCB.EC0.ECRD: 1 arguments were passed to a non-method ACPI object (RegionField) (20190509/nsarguments-209) [ 13.838251] ACPI: \_SB.PCI0.LPCB.EC0.ECRD: 1 arguments were passed to a non-method ACPI object (RegionField) (20190509/nsarguments-209) [ 13.838338] battery: new extension: ThinkPad Battery Extension [ 13.838385] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input10 [ 13.843486] iwlwifi 0000:04:00.0: loaded firmware version 29.1044073957.0 op_mode iwlmvm [ 13.853778] thinkpad_acpi: battery 1 registered (start 0, stop 100) [ 13.853782] battery: ACPI: Battery Slot [BAT0] (battery present) [ 13.857634] [drm] Initialized i915 1.6.0 20190417 for 0000:00:02.0 on minor 0 [ 13.864796] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 13.865035] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input14 [ 13.865238] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 13.886328] iwlwifi 0000:04:00.0: Detected Intel(R) Dual Band Wireless AC 7265, REV=0x210 [ 13.888515] intel_rapl: Found RAPL domain package [ 13.888521] intel_rapl: Found RAPL domain core [ 13.888524] intel_rapl: Found RAPL domain uncore [ 13.888526] intel_rapl: Found RAPL domain dram [ 13.895478] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input15 [ 13.895548] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input16 [ 13.895610] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input17 [ 13.895674] input: HDA Intel HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/sound/card0/input18 [ 13.895742] input: HDA Intel HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.0/sound/card0/input19 [ 13.909909] iwlwifi 0000:04:00.0: base HW address: 60:57:18:ab:e9:ce [ 13.968766] EXT4-fs (sda2): mounting ext2 file system using the ext4 subsystem [ 13.976264] EXT4-fs (sda2): mounted filesystem without journal. Opts: (null) [ 14.013004] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs' [ 14.013773] thermal thermal_zone2: failed to read out thermal zone (-61) [ 14.080789] fbcon: i915drmfb (fb0) is primary device [ 14.088399] usb 2-5: USB disconnect, device number 4 [ 14.135504] Adding 15622140k swap on /dev/mapper/terrence--hg6-swap. Priority:-2 extents:1 across:15622140k SSDsFS [ 14.137548] iTCO_vendor_support: vendor-support=0 [ 14.138123] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 14.138175] iTCO_wdt: Found a Wildcat Point_LP TCO device (Version=2, TCOBASE=0x1860) [ 14.138369] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 14.222378] Bluetooth: Core ver 2.22 [ 14.222392] NET: Registered protocol family 31 [ 14.222393] Bluetooth: HCI device and connection manager initialized [ 14.222396] Bluetooth: HCI socket layer initialized [ 14.222398] Bluetooth: L2CAP socket layer initialized [ 14.222401] Bluetooth: SCO socket layer initialized [ 14.238183] usbcore: registered new interface driver btusb [ 14.252482] Bluetooth: hci0: read Intel version: 370810011003110e00 [ 14.253145] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq [ 14.295977] iwlwifi 0000:04:00.0 wlp4s0: renamed from wlan0 [ 14.551659] Bluetooth: hci0: unexpected event for opcode 0xfc2f [ 14.568693] Bluetooth: hci0: Intel firmware patch completed and activated [ 15.181934] Console: switching to colour frame buffer device 240x67 [ 15.211430] i915 0000:00:02.0: fb0: i915drmfb frame buffer device [ 15.679027] EXT4-fs (dm-6): mounted filesystem with ordered data mode. Opts: (null) [ 15.679207] EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts: (null) [ 15.698786] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null) [ 15.740194] systemd-journald[502]: Received request to flush runtime journal from PID 1 [ 15.833319] tun: Universal TUN/TAP device driver, 1.6 [ 15.851530] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 15.856129] museum: port 1(museum0) entered blocking state [ 15.857391] museum: port 1(museum0) entered disabled state [ 15.858921] device museum0 entered promiscuous mode [ 16.014845] usb 2-5: new full-speed USB device number 5 using xhci_hcd [ 16.119636] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 16.119637] Bluetooth: BNEP filters: protocol multicast [ 16.119640] Bluetooth: BNEP socket layer initialized [ 16.163964] usb 2-5: New USB device found, idVendor=06cb, idProduct=7244, bcdDevice= 0.05 [ 16.165666] usb 2-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 16.167274] usb 2-5: Product: Synaptics Touch Digitizer V04 [ 16.168949] usb 2-5: Manufacturer: SYNAPTICS [ 16.173419] input: SYNAPTICS Synaptics Touch Digitizer V04 as /devices/pci0000:00/0000:00:14.0/usb2/2-5/2-5:1.0/0003:06CB:7244.0003/input/input21 [ 16.174901] hid-multitouch 0003:06CB:7244.0003: input,hiddev0,hidraw0: USB HID v1.11 Mouse [SYNAPTICS Synaptics Touch Digitizer V04] on usb-0000:00:14.0-5/input0 [ 16.184036] ACPI: \_SB.PCI0.LPCB.EC0.ECRD: 1 arguments were passed to a non-method ACPI object (RegionField) (20190509/nsarguments-209) [ 16.185428] ACPI: \_SB.PCI0.LPCB.EC0.ECRD: 1 arguments were passed to a non-method ACPI object (RegionField) (20190509/nsarguments-209) [ 16.185491] ACPI: \_SB.PCI0.LPCB.EC0.ECRD: 1 arguments were passed to a non-method ACPI object (RegionField) (20190509/nsarguments-209) [ 16.185521] ACPI: \_SB.PCI0.LPCB.EC0.ECRD: 1 arguments were passed to a non-method ACPI object (RegionField) (20190509/nsarguments-209) [ 16.185565] ACPI: \_SB.PCI0.LPCB.EC0.ECRD: 1 arguments were passed to a non-method ACPI object (RegionField) (20190509/nsarguments-209) [ 16.192236] ACPI: \_SB.PCI0.LPCB.EC0.ECRD: 1 arguments were passed to a non-method ACPI object (RegionField) (20190509/nsarguments-209) [ 16.192288] ACPI: \_SB.PCI0.LPCB.EC0.ECRD: 1 arguments were passed to a non-method ACPI object (RegionField) (20190509/nsarguments-209) [ 16.192315] ACPI: \_SB.PCI0.LPCB.EC0.ECRD: 1 arguments were passed to a non-method ACPI object (RegionField) (20190509/nsarguments-209) [ 16.192351] ACPI: \_SB.PCI0.LPCB.EC0.ECRD: 1 arguments were passed to a non-method ACPI object (RegionField) (20190509/nsarguments-209) [ 16.192375] ACPI: \_SB.PCI0.LPCB.EC0.ECRD: 1 arguments were passed to a non-method ACPI object (RegionField) (20190509/nsarguments-209) [ 16.192409] ACPI: \_SB.PCI0.LPCB.EC0.ECRD: 1 arguments were passed to a non-method ACPI object (RegionField) (20190509/nsarguments-209) [ 16.192433] ACPI: \_SB.PCI0.LPCB.EC0.ECRD: 1 arguments were passed to a non-method ACPI object (RegionField) (20190509/nsarguments-209) [ 16.192468] ACPI: \_SB.PCI0.LPCB.EC0.ECRD: 1 arguments were passed to a non-method ACPI object (RegionField) (20190509/nsarguments-209) [ 16.192490] ACPI: \_SB.PCI0.LPCB.EC0.ECRD: 1 arguments were passed to a non-method ACPI object (RegionField) (20190509/nsarguments-209) [ 16.192524] ACPI: \_SB.PCI0.LPCB.EC0.ECRD: 1 arguments were passed to a non-method ACPI object (RegionField) (20190509/nsarguments-209) [ 16.192547] ACPI: \_SB.PCI0.LPCB.EC0.ECRD: 1 arguments were passed to a non-method ACPI object (RegionField) (20190509/nsarguments-209) [ 16.192580] ACPI: \_SB.PCI0.LPCB.EC0.ECRD: 1 arguments were passed to a non-method ACPI object (RegionField) (20190509/nsarguments-209) [ 16.192602] ACPI: \_SB.PCI0.LPCB.EC0.ECRD: 1 arguments were passed to a non-method ACPI object (RegionField) (20190509/nsarguments-209) [ 16.192638] ACPI: \_SB.PCI0.LPCB.EC0.ECRD: 1 arguments were passed to a non-method ACPI object (RegionField) (20190509/nsarguments-209) [ 16.192660] ACPI: \_SB.PCI0.LPCB.EC0.ECRD: 1 arguments were passed to a non-method ACPI object (RegionField) (20190509/nsarguments-209) [ 16.192694] ACPI: \_SB.PCI0.LPCB.EC0.ECRD: 1 arguments were passed to a non-method ACPI object (RegionField) (20190509/nsarguments-209) [ 16.192717] ACPI: \_SB.PCI0.LPCB.EC0.ECRD: 1 arguments were passed to a non-method ACPI object (RegionField) (20190509/nsarguments-209) [ 16.192750] ACPI: \_SB.PCI0.LPCB.EC0.ECRD: 1 arguments were passed to a non-method ACPI object (RegionField) (20190509/nsarguments-209) [ 16.192771] ACPI: \_SB.PCI0.LPCB.EC0.ECRD: 1 arguments were passed to a non-method ACPI object (RegionField) (20190509/nsarguments-209) [ 16.192805] ACPI: \_SB.PCI0.LPCB.EC0.ECRD: 1 arguments were passed to a non-method ACPI object (RegionField) (20190509/nsarguments-209) [ 16.192827] ACPI: \_SB.PCI0.LPCB.EC0.ECRD: 1 arguments were passed to a non-method ACPI object (RegionField) (20190509/nsarguments-209) [ 16.192860] ACPI: \_SB.PCI0.LPCB.EC0.ECRD: 1 arguments were passed to a non-method ACPI object (RegionField) (20190509/nsarguments-209) [ 16.192882] ACPI: \_SB.PCI0.LPCB.EC0.ECRD: 1 arguments were passed to a non-method ACPI object (RegionField) (20190509/nsarguments-209) [ 16.192916] ACPI: \_SB.PCI0.LPCB.EC0.ECRD: 1 arguments were passed to a non-method ACPI object (RegionField) (20190509/nsarguments-209) [ 16.192937] ACPI: \_SB.PCI0.LPCB.EC0.ECRD: 1 arguments were passed to a non-method ACPI object (RegionField) (20190509/nsarguments-209) [ 16.192971] ACPI: \_SB.PCI0.LPCB.EC0.ECRD: 1 arguments were passed to a non-method ACPI object (RegionField) (20190509/nsarguments-209) [ 16.192993] ACPI: \_SB.PCI0.LPCB.EC0.ECRD: 1 arguments were passed to a non-method ACPI object (RegionField) (20190509/nsarguments-209) [ 16.193027] ACPI: \_SB.PCI0.LPCB.EC0.ECRD: 1 arguments were passed to a non-method ACPI object (RegionField) (20190509/nsarguments-209) [ 16.193049] ACPI: \_SB.PCI0.LPCB.EC0.ECRD: 1 arguments were passed to a non-method ACPI object (RegionField) (20190509/nsarguments-209) [ 17.282927] virbr0: port 1(virbr0-nic) entered blocking state [ 17.282929] virbr0: port 1(virbr0-nic) entered disabled state [ 17.283000] device virbr0-nic entered promiscuous mode [ 17.413481] virbr0: port 1(virbr0-nic) entered blocking state [ 17.413486] virbr0: port 1(virbr0-nic) entered listening state [ 17.466890] virbr0: port 1(virbr0-nic) entered disabled state [ 19.173709] fuse: init (API version 7.31) [ 19.413939] Bluetooth: RFCOMM TTY layer initialized [ 19.413946] Bluetooth: RFCOMM socket layer initialized [ 19.413951] Bluetooth: RFCOMM ver 1.11 [ 28.262634] wlp4s0: authenticate with e8:94:f6:ae:17:83 [ 28.269371] wlp4s0: send auth to e8:94:f6:ae:17:83 (try 1/3) [ 28.272047] wlp4s0: authenticated [ 28.274876] wlp4s0: associate with e8:94:f6:ae:17:83 (try 1/3) [ 28.284638] wlp4s0: RX AssocResp from e8:94:f6:ae:17:83 (capab=0x411 status=0 aid=1) [ 28.287049] wlp4s0: associated [ 28.308831] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready [ 28.368763] wlp4s0: Limiting TX power to 17 (20 - 3) dBm as advertised by e8:94:f6:ae:17:83 [ 28.377558] wlp4s0: AddBA Req buf_size=64 for e8:94:f6:ae:17:83 [ 28.377688] wlp4s0: Rx A-MPDU request on e8:94:f6:ae:17:83 tid 6 result 0 [ 28.480538] wlp4s0: AddBA Req buf_size=64 for e8:94:f6:ae:17:83 [ 28.480686] wlp4s0: Rx A-MPDU request on e8:94:f6:ae:17:83 tid 0 result 0 [ 28.748317] wlp4s0: Open BA session requested for e8:94:f6:ae:17:83 tid 0 [ 28.762876] wlp4s0: activated addBA response timer on e8:94:f6:ae:17:83 tid 0 [ 28.763430] wlp4s0: switched off addBA timer for e8:94:f6:ae:17:83 tid 0 [ 28.763432] wlp4s0: Aggregation is on for e8:94:f6:ae:17:83 tid 0 [ 46.258063] wlp4s0: AddBA Req buf_size=64 for e8:94:f6:ae:17:83 [ 46.258259] wlp4s0: Rx A-MPDU request on e8:94:f6:ae:17:83 tid 1 result 0 [ 276.526426] wlp4s0: deauthenticating from e8:94:f6:ae:17:83 by local choice (Reason: 3=DEAUTH_LEAVING) [ 276.528260] wlp4s0: Rx BA session stop requested for e8:94:f6:ae:17:83 tid 0 recipient reason: 36 [ 276.528391] wlp4s0: Rx BA session stop requested for e8:94:f6:ae:17:83 tid 1 recipient reason: 36 [ 276.528489] wlp4s0: Rx BA session stop requested for e8:94:f6:ae:17:83 tid 6 recipient reason: 36 [ 276.528610] wlp4s0: Tx BA session stop requested for e8:94:f6:ae:17:83 tid 0 [ 293.275039] wlp4s0: authenticate with e8:94:f6:ae:17:83 [ 293.281370] wlp4s0: send auth to e8:94:f6:ae:17:83 (try 1/3) [ 293.283333] wlp4s0: authenticated [ 293.284088] wlp4s0: associate with e8:94:f6:ae:17:83 (try 1/3) [ 293.294096] wlp4s0: RX AssocResp from e8:94:f6:ae:17:83 (capab=0x411 status=0 aid=1) [ 293.296684] wlp4s0: associated [ 293.312189] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready [ 293.379061] wlp4s0: AddBA Req buf_size=64 for e8:94:f6:ae:17:83 [ 293.379240] wlp4s0: Rx A-MPDU request on e8:94:f6:ae:17:83 tid 6 result 0 [ 293.383893] wlp4s0: Limiting TX power to 17 (20 - 3) dBm as advertised by e8:94:f6:ae:17:83 [ 293.762488] wlp4s0: AddBA Req buf_size=64 for e8:94:f6:ae:17:83 [ 293.762734] wlp4s0: Rx A-MPDU request on e8:94:f6:ae:17:83 tid 0 result 0 [ 295.394312] wlp4s0: Open BA session requested for e8:94:f6:ae:17:83 tid 0 [ 295.408205] wlp4s0: activated addBA response timer on e8:94:f6:ae:17:83 tid 0 [ 295.408888] wlp4s0: switched off addBA timer for e8:94:f6:ae:17:83 tid 0 [ 295.408892] wlp4s0: Aggregation is on for e8:94:f6:ae:17:83 tid 0 [ 303.470180] wlp4s0: AddBA Req buf_size=64 for e8:94:f6:ae:17:83 [ 303.470321] wlp4s0: Rx A-MPDU request on e8:94:f6:ae:17:83 tid 1 result 0 [ 415.566832] wlp4s0: deauthenticating from e8:94:f6:ae:17:83 by local choice (Reason: 3=DEAUTH_LEAVING) [ 415.577284] wlp4s0: Rx BA session stop requested for e8:94:f6:ae:17:83 tid 0 recipient reason: 36 [ 415.577450] wlp4s0: Rx BA session stop requested for e8:94:f6:ae:17:83 tid 1 recipient reason: 36 [ 415.577600] wlp4s0: Rx BA session stop requested for e8:94:f6:ae:17:83 tid 6 recipient reason: 36 [ 415.577739] wlp4s0: Tx BA session stop requested for e8:94:f6:ae:17:83 tid 0 [ 426.699631] wlp4s0: authenticate with e8:94:f6:ae:17:83 [ 426.705748] wlp4s0: send auth to e8:94:f6:ae:17:83 (try 1/3) [ 426.707762] wlp4s0: authenticated [ 426.710912] wlp4s0: associate with e8:94:f6:ae:17:83 (try 1/3) [ 426.720749] wlp4s0: RX AssocResp from e8:94:f6:ae:17:83 (capab=0x411 status=0 aid=1) [ 426.723688] wlp4s0: associated [ 426.731001] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready [ 426.793605] wlp4s0: AddBA Req buf_size=64 for e8:94:f6:ae:17:83 [ 426.793743] wlp4s0: Rx A-MPDU request on e8:94:f6:ae:17:83 tid 6 result 0 [ 426.813241] wlp4s0: Limiting TX power to 17 (20 - 3) dBm as advertised by e8:94:f6:ae:17:83 [ 427.491814] wlp4s0: AddBA Req buf_size=64 for e8:94:f6:ae:17:83 [ 427.492067] wlp4s0: Rx A-MPDU request on e8:94:f6:ae:17:83 tid 0 result 0 [ 428.705260] wlp4s0: Open BA session requested for e8:94:f6:ae:17:83 tid 0 [ 428.722953] wlp4s0: activated addBA response timer on e8:94:f6:ae:17:83 tid 0 [ 428.723607] wlp4s0: switched off addBA timer for e8:94:f6:ae:17:83 tid 0 [ 428.723612] wlp4s0: Aggregation is on for e8:94:f6:ae:17:83 tid 0