On 1/4/2022 8:26 AM, Hector Martin wrote:
> The TxCap blobs are additional data blobs used on Apple devices, and
> are uploaded analogously to CLM blobs. Add core support for doing this.

Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
> Acked-by: Linus Walleij <linus.walleij@linaro.org>
> Signed-off-by: Hector Martin <marcan@marcan.st>
> ---
>   .../broadcom/brcm80211/brcmfmac/bus.h         |  1 +
>   .../broadcom/brcm80211/brcmfmac/common.c      | 97 +++++++++++++------
>   2 files changed, 71 insertions(+), 27 deletions(-)
> 
> diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bus.h b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bus.h
> index b13af8f631f3..f4bd98da9761 100644
> --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bus.h
> +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bus.h
> @@ -39,6 +39,7 @@ enum brcmf_bus_protocol_type {
>   /* Firmware blobs that may be available */
>   enum brcmf_blob_type {
>   	BRCMF_BLOB_CLM,
> +	BRCMF_BLOB_TXCAP,
>   };
>   
>   struct brcmf_mp_device;
> diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c
> index c84c48e49fde..d65308c3f070 100644
> --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c
> +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c

[...]

> @@ -165,20 +157,64 @@ static int brcmf_c_process_clm_blob(struct brcmf_if *ifp)
>   	} while ((datalen > 0) && (err == 0));
>   

[...]

> +static int brcmf_c_process_txcap_blob(struct brcmf_if *ifp)
> +{
> +	struct brcmf_pub *drvr = ifp->drvr;
> +	struct brcmf_bus *bus = drvr->bus_if;
> +	const struct firmware *fw = NULL;
> +	s32 err;
> +
> +	brcmf_dbg(TRACE, "Enter\n");
> +
> +	err = brcmf_bus_get_blob(bus, &fw, BRCMF_BLOB_TXCAP);
> +	if (err || !fw) {
> +		brcmf_info("no txcap_blob available (err=%d)\n", err);
> +		return 0;
> +	}
> +
> +	brcmf_info("TxCap blob found, loading\n");
> +	err = brcmf_c_download_blob(ifp, fw->data, fw->size,
> +				    "txcapload", "txcapload_status");

Although unlikely that we end up here with a firmware that does not 
support this command it is not impossible. Should we handle that here or 
introduce a feature flag for txcap loading?

> +	release_firmware(fw);
>   	return err;
>   }