linux-xfs.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Brian Foster <bfoster@redhat.com>
To: "Darrick J. Wong" <darrick.wong@oracle.com>
Cc: sandeen@sandeen.net, linux-xfs@vger.kernel.org, alex@zadara.com
Subject: Re: [PATCH 3/6] xfs_repair: enforce that inode btree chunks can't point to AG headers
Date: Fri, 6 Dec 2019 11:00:44 -0500	[thread overview]
Message-ID: <20191206160044.GB56473@bfoster> (raw)
In-Reply-To: <20191205162818.GC13260@magnolia>

On Thu, Dec 05, 2019 at 08:28:18AM -0800, Darrick J. Wong wrote:
> On Thu, Dec 05, 2019 at 09:37:27AM -0500, Brian Foster wrote:
> > On Wed, Dec 04, 2019 at 09:04:43AM -0800, Darrick J. Wong wrote:
> > > From: Darrick J. Wong <darrick.wong@oracle.com>
> > > 
> > > xfs_repair has a very old check that evidently excuses the AG 0 inode
> > > btrees pointing to blocks that are already marked XR_E_INUSE_FS* (e.g.
> > > AG headers).  mkfs never formats filesystems that way and it looks like
> > > an error, so purge the check.  After this, we always complain if inodes
> > > overlap with AG headers because that should never happen.
> > > 
> > > Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
> > > ---
> > 
> > Strange.. This seems reasonable to me, but any idea on how this might
> > have been used in the past?
> 
> I don't have a clue -- this code has been there since the start of the
> xfsprogs git repo and I don't have the pre-git history.  Dave said
> "hysterical raisins".
> 

Heh, Ok.

> > The only thing I can see so far is that
> > perhaps if the superblock (blocksize/sectorsize) is corrupted, the
> > in-core state trees could be badly initialized such that the inode falls
> > into the "in use" state. Of course if that were the case the fs probably
> > has bigger problems..
> 
> Yeah.  These days if all those things collide (or look like they
> collide) then chances are the filesystem is already toast.
> 

I guess I'm curious if/how this could change behavior in some way. It
kind of looks like this could be some kind of override to try and
preserve/prioritize the root inode if something else happens to be
corrupted and conflict. E.g., what happens if a stray rmapbt record
(incorrectly) categorizes this range as something other than inodes
before the inode scan gets to it? Would this change recovery behavior
from something that treats that as a broken rmapbt to something broader,
or is the outcome generally the same?

It looks to me it _could_ change behavior, but that's also considering a
very targeted corruption vs. something more likely to manifest in the
wild. This code clearly predates rmapbt, so that's obviously not the
original intent. I do also find it odd the hysterical code doesn't warn
if this condition occurs..

Brian

> --D
> 
> > Brian
> > 
> > >  repair/globals.c    |    1 -
> > >  repair/globals.h    |    1 -
> > >  repair/scan.c       |   19 -------------------
> > >  repair/xfs_repair.c |    7 -------
> > >  4 files changed, 28 deletions(-)
> > > 
> > > 
> > > diff --git a/repair/globals.c b/repair/globals.c
> > > index dcd79ea4..8a60e706 100644
> > > --- a/repair/globals.c
> > > +++ b/repair/globals.c
> > > @@ -73,7 +73,6 @@ int	lost_gquotino;
> > >  int	lost_pquotino;
> > >  
> > >  xfs_agino_t	first_prealloc_ino;
> > > -xfs_agino_t	last_prealloc_ino;
> > >  xfs_agblock_t	bnobt_root;
> > >  xfs_agblock_t	bcntbt_root;
> > >  xfs_agblock_t	inobt_root;
> > > diff --git a/repair/globals.h b/repair/globals.h
> > > index 008bdd90..2ed5c894 100644
> > > --- a/repair/globals.h
> > > +++ b/repair/globals.h
> > > @@ -114,7 +114,6 @@ extern int		lost_gquotino;
> > >  extern int		lost_pquotino;
> > >  
> > >  extern xfs_agino_t	first_prealloc_ino;
> > > -extern xfs_agino_t	last_prealloc_ino;
> > >  extern xfs_agblock_t	bnobt_root;
> > >  extern xfs_agblock_t	bcntbt_root;
> > >  extern xfs_agblock_t	inobt_root;
> > > diff --git a/repair/scan.c b/repair/scan.c
> > > index c383f3aa..05707dd2 100644
> > > --- a/repair/scan.c
> > > +++ b/repair/scan.c
> > > @@ -1645,13 +1645,6 @@ scan_single_ino_chunk(
> > >  				break;
> > >  			case XR_E_INUSE_FS:
> > >  			case XR_E_INUSE_FS1:
> > > -				if (agno == 0 &&
> > > -				    ino + j >= first_prealloc_ino &&
> > > -				    ino + j < last_prealloc_ino) {
> > > -					set_bmap(agno, agbno, XR_E_INO);
> > > -					break;
> > > -				}
> > > -				/* fall through */
> > >  			default:
> > >  				/* XXX - maybe should mark block a duplicate */
> > >  				do_warn(
> > > @@ -1782,18 +1775,6 @@ _("inode chunk claims untracked block, finobt block - agno %d, bno %d, inopb %d\
> > >  				break;
> > >  			case XR_E_INUSE_FS:
> > >  			case XR_E_INUSE_FS1:
> > > -				if (agno == 0 &&
> > > -				    ino + j >= first_prealloc_ino &&
> > > -				    ino + j < last_prealloc_ino) {
> > > -					do_warn(
> > > -_("inode chunk claims untracked block, finobt block - agno %d, bno %d, inopb %d\n"),
> > > -						agno, agbno, mp->m_sb.sb_inopblock);
> > > -
> > > -					set_bmap(agno, agbno, XR_E_INO);
> > > -					suspect++;
> > > -					break;
> > > -				}
> > > -				/* fall through */
> > >  			default:
> > >  				do_warn(
> > >  _("inode chunk claims used block, finobt block - agno %d, bno %d, inopb %d\n"),
> > > diff --git a/repair/xfs_repair.c b/repair/xfs_repair.c
> > > index 9295673d..3e9059f3 100644
> > > --- a/repair/xfs_repair.c
> > > +++ b/repair/xfs_repair.c
> > > @@ -460,13 +460,6 @@ calc_mkfs(xfs_mount_t *mp)
> > >  		first_prealloc_ino = XFS_AGB_TO_AGINO(mp, fino_bno);
> > >  	}
> > >  
> > > -	ASSERT(M_IGEO(mp)->ialloc_blks > 0);
> > > -
> > > -	if (M_IGEO(mp)->ialloc_blks > 1)
> > > -		last_prealloc_ino = first_prealloc_ino + XFS_INODES_PER_CHUNK;
> > > -	else
> > > -		last_prealloc_ino = XFS_AGB_TO_AGINO(mp, fino_bno + 1);
> > > -
> > >  	/*
> > >  	 * now the first 3 inodes in the system
> > >  	 */
> > > 
> > 
> 


  reply	other threads:[~2019-12-06 16:00 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-12-04 17:04 [PATCH v2 0/6] xfs_repair: do not trash valid root dirs Darrick J. Wong
2019-12-04 17:04 ` [PATCH 1/6] xfs: don't commit sunit/swidth updates to disk if that would cause repair failures Darrick J. Wong
2019-12-04 17:04 ` [PATCH 2/6] mkfs: check root inode location Darrick J. Wong
2019-12-05 14:36   ` Brian Foster
2019-12-04 17:04 ` [PATCH 3/6] xfs_repair: enforce that inode btree chunks can't point to AG headers Darrick J. Wong
2019-12-05 14:37   ` Brian Foster
2019-12-05 16:28     ` Darrick J. Wong
2019-12-06 16:00       ` Brian Foster [this message]
2019-12-12 19:11       ` Eric Sandeen
2019-12-12 20:38   ` Eric Sandeen
2019-12-12 22:10     ` Darrick J. Wong
2019-12-04 17:04 ` [PATCH 4/6] xfs_repair: refactor fixed inode location checks Darrick J. Wong
2019-12-05 14:37   ` Brian Foster
2019-12-04 17:04 ` [PATCH 5/6] xfs_repair: use libxfs function to calculate root inode location Darrick J. Wong
2019-12-05 14:37   ` Brian Foster
2019-12-04 17:05 ` [PATCH 6/6] xfs_repair: check plausibility of root dir pointer before trashing it Darrick J. Wong
2019-12-05 14:38   ` Brian Foster
2019-12-12 22:46     ` [PATCH 6/6] xfs_repair: check plausibility of root dir pointer before trashing it\ Darrick J. Wong
2019-12-13 11:19       ` Brian Foster
2019-12-16 16:34         ` Darrick J. Wong
2019-12-17 11:32           ` Brian Foster

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191206160044.GB56473@bfoster \
    --to=bfoster@redhat.com \
    --cc=alex@zadara.com \
    --cc=darrick.wong@oracle.com \
    --cc=linux-xfs@vger.kernel.org \
    --cc=sandeen@sandeen.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).