linuxppc-dev.lists.ozlabs.org archive mirror
 help / color / mirror / Atom feed
From: Kumar Gala <galak@kernel.crashing.org>
To: linuxppc-dev@ozlabs.org
Subject: [PATCH 11/11] powerpc/fsl-booke: Add e55xx (64-bit) smp defconfig
Date: Fri,  8 Oct 2010 14:06:53 -0500	[thread overview]
Message-ID: <1286564813-21209-11-git-send-email-galak@kernel.crashing.org> (raw)
In-Reply-To: <1286564813-21209-10-git-send-email-galak@kernel.crashing.org>

The p5020 SoC from Freescale is the first 64-bit Book-E processor and
utilizes the two e5500 cores.  Adding a defconfig that enables basic kernel
for e5500 based processors.

Also added the p5020 / e5500 support to the ppc64e defconfig.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
 arch/powerpc/configs/e55xx_smp_defconfig |   84 ++++++++++++++++++++++++++++++
 arch/powerpc/configs/ppc64e_defconfig    |    4 +-
 2 files changed, 85 insertions(+), 3 deletions(-)
 create mode 100644 arch/powerpc/configs/e55xx_smp_defconfig

diff --git a/arch/powerpc/configs/e55xx_smp_defconfig b/arch/powerpc/configs/e55xx_smp_defconfig
new file mode 100644
index 0000000..94d120e
--- /dev/null
+++ b/arch/powerpc/configs/e55xx_smp_defconfig
@@ -0,0 +1,84 @@
+CONFIG_PPC64=y
+CONFIG_PPC_BOOK3E_64=y
+# CONFIG_VIRT_CPU_ACCOUNTING is not set
+CONFIG_SMP=y
+CONFIG_NR_CPUS=2
+CONFIG_EXPERIMENTAL=y
+CONFIG_SYSVIPC=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_SYSFS_DEPRECATED_V2=y
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_P5020_DS=y
+# CONFIG_PPC_OF_BOOT_TRAMPOLINE is not set
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_BINFMT_MISC=m
+CONFIG_SPARSE_IRQ=y
+# CONFIG_PCI is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_PROC_DEVICETREE=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_SIZE=131072
+CONFIG_EEPROM_LEGACY=y
+CONFIG_INPUT_FF_MEMLESS=m
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+CONFIG_SERIO_LIBPS2=y
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+CONFIG_I2C=y
+# CONFIG_HWMON is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=y
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_DMADEVICES=y
+CONFIG_FSL_DMA=y
+CONFIG_EXT2_FS=y
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_PROC_KCORE=y
+CONFIG_TMPFS=y
+# CONFIG_MISC_FILESYSTEMS is not set
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_MAC_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_UTF8=m
+CONFIG_CRC_T10DIF=y
+CONFIG_CRC_ITU_T=m
+CONFIG_LIBCRC32C=m
+CONFIG_FRAME_WARN=1024
+CONFIG_DEBUG_FS=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_VIRQ_DEBUG=y
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_DEV_TALITOS=y
diff --git a/arch/powerpc/configs/ppc64e_defconfig b/arch/powerpc/configs/ppc64e_defconfig
index 04ae074..7bd1763 100644
--- a/arch/powerpc/configs/ppc64e_defconfig
+++ b/arch/powerpc/configs/ppc64e_defconfig
@@ -18,6 +18,7 @@ CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_P5020_DS=y
 CONFIG_CPU_FREQ=y
 CONFIG_CPU_FREQ_GOV_POWERSAVE=y
 CONFIG_CPU_FREQ_GOV_USERSPACE=y
@@ -256,7 +257,6 @@ CONFIG_HID_ZEROPLUS=y
 CONFIG_USB=y
 CONFIG_USB_DEVICEFS=y
 CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_TT_NEWSCHED=y
 # CONFIG_USB_EHCI_HCD_PPC_OF is not set
 CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_STORAGE=m
@@ -290,7 +290,6 @@ CONFIG_JFS_POSIX_ACL=y
 CONFIG_JFS_SECURITY=y
 CONFIG_XFS_FS=m
 CONFIG_XFS_POSIX_ACL=y
-CONFIG_INOTIFY=y
 CONFIG_AUTOFS4_FS=m
 CONFIG_ISO9660_FS=y
 CONFIG_UDF_FS=m
@@ -384,7 +383,6 @@ CONFIG_CRYPTO_TGR192=m
 CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_AES=m
 CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_ARC4=m
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_CAST6=m
 CONFIG_CRYPTO_KHAZAD=m
-- 
1.7.2.3

  reply	other threads:[~2010-10-08 19:07 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-10-08 19:06 [PATCH 01/11] powerpc/mpc8xxx_gpio: Add support for 'qoriq-gpio' controllers Kumar Gala
2010-10-08 19:06 ` [PATCH 02/11] oprofile/fsl emb: Don't set MSR[PMM] until after clearing the interrupt Kumar Gala
2010-10-08 19:06   ` [PATCH 03/11] powerpc/fsl-booke: Add PCI device ids for P2040/P3041/P5010/P5020 QoirQ chips Kumar Gala
2010-10-08 19:06     ` [PATCH 04/11] powerpc/fsl-booke: Add p3041 DS board support Kumar Gala
2010-10-08 19:06       ` [PATCH 05/11] powerpc: Fix compile error with paca code on ppc64e Kumar Gala
2010-10-08 19:06         ` [PATCH 06/11] powerpc/ppc64e: Fix link problem when building ppc64e_defconfig Kumar Gala
2010-10-08 19:06           ` [PATCH 07/11] powerpc/fsl-booke: Add support for FSL 64-bit e5500 core Kumar Gala
2010-10-08 19:06             ` [PATCH 08/11] powerpc/fsl-booke: Add support for FSL Arch v1.0 MMU in setup_page_sizes Kumar Gala
2010-10-08 19:06               ` [PATCH 09/11] powerpc/fsl-booke64: Use TLB CAMs to cover linear mapping on FSL 64-bit chips Kumar Gala
2010-10-08 19:06                 ` [PATCH 10/11] powerpc/fsl-booke: Add p5020 DS board support Kumar Gala
2010-10-08 19:06                   ` Kumar Gala [this message]
2010-10-13 23:57                 ` [PATCH 09/11] powerpc/fsl-booke64: Use TLB CAMs to cover linear mapping on FSL 64-bit chips Benjamin Herrenschmidt
2010-10-08 20:55             ` [PATCH 07/11] powerpc/fsl-booke: Add support for FSL 64-bit e5500 core Scott Wood
2010-10-08 19:24     ` [PATCH 03/11] powerpc/fsl-booke: Add PCI device ids for P2040/P3041/P5010/P5020 QoirQ chips Kumar Gala
2010-10-08 19:28     ` Timur Tabi
2010-10-08 20:20       ` Kumar Gala
2010-10-08 19:24 ` [PATCH 01/11] powerpc/mpc8xxx_gpio: Add support for 'qoriq-gpio' controllers Kumar Gala

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1286564813-21209-11-git-send-email-galak@kernel.crashing.org \
    --to=galak@kernel.crashing.org \
    --cc=linuxppc-dev@ozlabs.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).