From: Anton Blanchard <anton@samba.org>
To: Benjamin Herrenschmidt <benh@kernel.crashing.org>,
Paul Mackerras <paulus@samba.org>
Cc: linuxppc-dev@lists.ozlabs.org
Subject: [PATCH 27/39] powerpc/powernv: Fix endian issues in powernv PCI code
Date: Mon, 23 Sep 2013 12:05:01 +1000 [thread overview]
Message-ID: <1379901913-5945-28-git-send-email-anton@samba.org> (raw)
In-Reply-To: <1379901913-5945-1-git-send-email-anton@samba.org>
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
arch/powerpc/platforms/powernv/pci-ioda.c | 31 +++++++++++++++++--------------
arch/powerpc/platforms/powernv/pci.c | 27 +++++++++++++--------------
2 files changed, 30 insertions(+), 28 deletions(-)
diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c
index 9a903ed..f9cb6c5 100644
--- a/arch/powerpc/platforms/powernv/pci-ioda.c
+++ b/arch/powerpc/platforms/powernv/pci-ioda.c
@@ -457,7 +457,7 @@ static void pnv_ioda_setup_bus_dma(struct pnv_ioda_pe *pe, struct pci_bus *bus)
static void pnv_pci_ioda1_tce_invalidate(struct iommu_table *tbl,
u64 *startp, u64 *endp)
{
- u64 __iomem *invalidate = (u64 __iomem *)tbl->it_index;
+ __be64 __iomem *invalidate = (__be64 __iomem *)tbl->it_index;
unsigned long start, end, inc;
start = __pa(startp);
@@ -484,7 +484,7 @@ static void pnv_pci_ioda1_tce_invalidate(struct iommu_table *tbl,
mb(); /* Ensure above stores are visible */
while (start <= end) {
- __raw_writeq(start, invalidate);
+ __raw_writeq(cpu_to_be64(start), invalidate);
start += inc;
}
@@ -499,7 +499,7 @@ static void pnv_pci_ioda2_tce_invalidate(struct pnv_ioda_pe *pe,
u64 *startp, u64 *endp)
{
unsigned long start, end, inc;
- u64 __iomem *invalidate = (u64 __iomem *)tbl->it_index;
+ __be64 __iomem *invalidate = (__be64 __iomem *)tbl->it_index;
/* We'll invalidate DMA address in PE scope */
start = 0x2ul << 60;
@@ -515,7 +515,7 @@ static void pnv_pci_ioda2_tce_invalidate(struct pnv_ioda_pe *pe,
mb();
while (start <= end) {
- __raw_writeq(start, invalidate);
+ __raw_writeq(cpu_to_be64(start), invalidate);
start += inc;
}
}
@@ -786,8 +786,7 @@ static int pnv_pci_ioda_msi_setup(struct pnv_phb *phb, struct pci_dev *dev,
struct irq_data *idata;
struct irq_chip *ichip;
unsigned int xive_num = hwirq - phb->msi_base;
- uint64_t addr64;
- uint32_t addr32, data;
+ __be32 data;
int rc;
/* No PE assigned ? bail out ... no MSI for you ! */
@@ -811,6 +810,8 @@ static int pnv_pci_ioda_msi_setup(struct pnv_phb *phb, struct pci_dev *dev,
}
if (is_64) {
+ __be64 addr64;
+
rc = opal_get_msi_64(phb->opal_id, pe->mve_number, xive_num, 1,
&addr64, &data);
if (rc) {
@@ -818,9 +819,11 @@ static int pnv_pci_ioda_msi_setup(struct pnv_phb *phb, struct pci_dev *dev,
pci_name(dev), rc);
return -EIO;
}
- msg->address_hi = addr64 >> 32;
- msg->address_lo = addr64 & 0xfffffffful;
+ msg->address_hi = be64_to_cpu(addr64) >> 32;
+ msg->address_lo = be64_to_cpu(addr64) & 0xfffffffful;
} else {
+ __be32 addr32;
+
rc = opal_get_msi_32(phb->opal_id, pe->mve_number, xive_num, 1,
&addr32, &data);
if (rc) {
@@ -829,9 +832,9 @@ static int pnv_pci_ioda_msi_setup(struct pnv_phb *phb, struct pci_dev *dev,
return -EIO;
}
msg->address_hi = 0;
- msg->address_lo = addr32;
+ msg->address_lo = be32_to_cpu(addr32);
}
- msg->data = data;
+ msg->data = be32_to_cpu(data);
/*
* Change the IRQ chip for the MSI interrupts on PHB3.
@@ -1107,7 +1110,7 @@ void __init pnv_pci_init_ioda_phb(struct device_node *np,
struct pnv_phb *phb;
unsigned long size, m32map_off, iomap_off, pemap_off;
const __be64 *prop64;
- const u32 *prop32;
+ const __be32 *prop32;
int len;
u64 phb_id;
void *aux;
@@ -1142,8 +1145,8 @@ void __init pnv_pci_init_ioda_phb(struct device_node *np,
spin_lock_init(&phb->lock);
prop32 = of_get_property(np, "bus-range", &len);
if (prop32 && len == 8) {
- hose->first_busno = prop32[0];
- hose->last_busno = prop32[1];
+ hose->first_busno = be32_to_cpu(prop32[0]);
+ hose->last_busno = be32_to_cpu(prop32[1]);
} else {
pr_warn(" Broken <bus-range> on %s\n", np->full_name);
hose->first_busno = 0;
@@ -1175,7 +1178,7 @@ void __init pnv_pci_init_ioda_phb(struct device_node *np,
if (!prop32)
phb->ioda.total_pe = 1;
else
- phb->ioda.total_pe = *prop32;
+ phb->ioda.total_pe = be32_to_cpup(prop32);
phb->ioda.m32_size = resource_size(&hose->mem_resources[0]);
/* FW Has already off top 64k of M32 space (MSI space) */
diff --git a/arch/powerpc/platforms/powernv/pci.c b/arch/powerpc/platforms/powernv/pci.c
index 9122215..2f73e0d 100644
--- a/arch/powerpc/platforms/powernv/pci.c
+++ b/arch/powerpc/platforms/powernv/pci.c
@@ -236,7 +236,7 @@ static void pnv_pci_config_check_eeh(struct pnv_phb *phb,
{
s64 rc;
u8 fstate;
- u16 pcierr;
+ __be16 pcierr;
u32 pe_no;
/*
@@ -283,16 +283,16 @@ int pnv_pci_cfg_read(struct device_node *dn,
break;
}
case 2: {
- u16 v16;
+ __be16 v16;
rc = opal_pci_config_read_half_word(phb->opal_id, bdfn, where,
&v16);
- *val = (rc == OPAL_SUCCESS) ? v16 : 0xffff;
+ *val = (rc == OPAL_SUCCESS) ? be16_to_cpu(v16) : 0xffff;
break;
}
case 4: {
- u32 v32;
+ __be32 v32;
rc = opal_pci_config_read_word(phb->opal_id, bdfn, where, &v32);
- *val = (rc == OPAL_SUCCESS) ? v32 : 0xffffffff;
+ *val = (rc == OPAL_SUCCESS) ? be32_to_cpu(v32) : 0xffffffff;
break;
}
default:
@@ -404,7 +404,7 @@ static int pnv_tce_build(struct iommu_table *tbl, long index, long npages,
struct dma_attrs *attrs)
{
u64 proto_tce;
- u64 *tcep, *tces;
+ __be64 *tcep, *tces;
u64 rpn;
proto_tce = TCE_PCI_READ; // Read allowed
@@ -416,7 +416,7 @@ static int pnv_tce_build(struct iommu_table *tbl, long index, long npages,
rpn = __pa(uaddr) >> TCE_SHIFT;
while (npages--)
- *(tcep++) = proto_tce | (rpn++ << TCE_RPN_SHIFT);
+ *(tcep++) = cpu_to_be64(proto_tce | (rpn++ << TCE_RPN_SHIFT));
/* Some implementations won't cache invalid TCEs and thus may not
* need that flush. We'll probably turn it_type into a bit mask
@@ -430,12 +430,12 @@ static int pnv_tce_build(struct iommu_table *tbl, long index, long npages,
static void pnv_tce_free(struct iommu_table *tbl, long index, long npages)
{
- u64 *tcep, *tces;
+ __be64 *tcep, *tces;
tces = tcep = ((u64 *)tbl->it_base) + index - tbl->it_offset;
while (npages--)
- *(tcep++) = 0;
+ *(tcep++) = cpu_to_be64(0);
if (tbl->it_type & TCE_PCI_SWINV_FREE)
pnv_pci_ioda_tce_invalidate(tbl, tces, tcep - 1);
@@ -462,8 +462,8 @@ void pnv_pci_setup_iommu_table(struct iommu_table *tbl,
static struct iommu_table *pnv_pci_setup_bml_iommu(struct pci_controller *hose)
{
struct iommu_table *tbl;
- const __be64 *basep;
- const __be32 *sizep, *swinvp;
+ const __be64 *basep, *swinvp;
+ const __be32 *sizep;
basep = of_get_property(hose->dn, "linux,tce-base", NULL);
sizep = of_get_property(hose->dn, "linux,tce-size", NULL);
@@ -484,9 +484,8 @@ static struct iommu_table *pnv_pci_setup_bml_iommu(struct pci_controller *hose)
swinvp = of_get_property(hose->dn, "linux,tce-sw-invalidate-info",
NULL);
if (swinvp) {
- tbl->it_busno = of_read_ulong(&swinvp[1], 2);
- tbl->it_index =
- (unsigned long)ioremap(of_read_number(swinvp, 2), 8);
+ tbl->it_busno = swinvp[1];
+ tbl->it_index = (unsigned long)ioremap(be64_to_cpup(swinvp), 8);
tbl->it_type = TCE_PCI_SWINV_CREATE | TCE_PCI_SWINV_FREE;
}
return tbl;
--
1.8.1.2
next prev parent reply other threads:[~2013-09-23 2:05 UTC|newest]
Thread overview: 49+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-09-23 2:04 [PATCH 00/39] Second round of 64bit PowerPC little endian patches Anton Blanchard
2013-09-23 2:04 ` [PATCH 01/39] powerpc: Fix endian issues in VMX copy loops Anton Blanchard
2013-09-23 2:04 ` [PATCH 02/39] powerpc: Book 3S MMU little endian support Anton Blanchard
2013-09-23 2:04 ` [PATCH 03/39] powerpc: Fix offset of FPRs in VSX registers in little endian builds Anton Blanchard
2013-09-23 2:04 ` [PATCH 04/39] powerpc: PTRACE_PEEKUSR/PTRACE_POKEUSER of FPR " Anton Blanchard
2013-09-23 2:04 ` [PATCH 05/39] powerpc: Little endian builds double word swap VSX state during context save/restore Anton Blanchard
2013-09-23 2:04 ` [PATCH 06/39] powerpc: Support endian agnostic MMIO Anton Blanchard
2013-09-23 2:04 ` [PATCH 07/39] powerpc: Add little endian support for word-at-a-time functions Anton Blanchard
2013-09-23 2:04 ` [PATCH 08/39] powerpc: Set MSR_LE bit on little endian builds Anton Blanchard
2013-09-23 2:04 ` [PATCH 09/39] powerpc: Reset MSR_LE on signal entry Anton Blanchard
2013-09-23 2:04 ` [PATCH 10/39] powerpc: Include the appropriate endianness header Anton Blanchard
2013-09-23 2:04 ` [PATCH 11/39] powerpc: endian safe trampoline Anton Blanchard
2013-12-28 7:24 ` Olof Johansson
2013-12-28 7:58 ` Benjamin Herrenschmidt
2013-09-23 2:04 ` [PATCH 12/39] powerpc: Remove open coded byte swap macro in alignment handler Anton Blanchard
2013-09-23 2:04 ` [PATCH 13/39] powerpc: Remove hard coded FP offsets " Anton Blanchard
2013-09-23 2:04 ` [PATCH 14/39] powerpc: Alignment handler shouldn't access VSX registers with TS_FPR Anton Blanchard
2013-09-23 2:04 ` [PATCH 15/39] powerpc: Add little endian support to alignment handler Anton Blanchard
2013-09-23 2:04 ` [PATCH 16/39] powerpc: Handle VSX alignment faults in little endian mode Anton Blanchard
2013-09-23 2:04 ` [PATCH 17/39] powerpc: Use generic checksum code in little endian Anton Blanchard
2013-09-23 2:04 ` [PATCH 18/39] powerpc: Use generic memcpy " Anton Blanchard
2013-09-23 2:04 ` [PATCH 19/39] powerpc: uname should return ppc64le/ppcle on little endian builds Anton Blanchard
2013-09-23 2:04 ` [PATCH 20/39] powerpc: Little endian fixes for platforms/powernv/opal.c Anton Blanchard
2013-09-23 2:04 ` [PATCH 21/39] powerpc: Little endian fix for arch/powerpc/platforms/powernv/pci.c Anton Blanchard
2013-09-23 2:04 ` [PATCH 22/39] powerpc: Little endian fix for arch/powerpc/platforms/powernv/pci-p5ioc2.c Anton Blanchard
2013-09-23 2:04 ` [PATCH 23/39] powerpc: Little endian sparse clean up for arch/powerpc/platforms/powernv/pci-ioda.c Anton Blanchard
2013-09-23 2:04 ` [PATCH 24/39] powerpc/powernv: Fix endian issues in OPAL RTC driver Anton Blanchard
2013-09-23 2:04 ` [PATCH 25/39] powerpc/powernv: Fix endian issues in OPAL ICS backend Anton Blanchard
2013-09-23 2:05 ` [PATCH 26/39] powerpc/powernv: Make OPAL NVRAM device tree accesses endian safe Anton Blanchard
2013-09-23 2:05 ` Anton Blanchard [this message]
2013-09-23 2:05 ` [PATCH 28/39] powerpc/powernv: Fix endian issues in OPAL console and udbg backend Anton Blanchard
2013-09-23 2:05 ` [PATCH 29/39] powerpc/powernv: Fix OPAL entry and exit in little endian mode Anton Blanchard
2013-09-23 2:05 ` [PATCH 30/39] powerpc/powernv: Don't register exception handlers " Anton Blanchard
2013-09-23 2:05 ` [PATCH 31/39] powerpc/powernv: More little endian issues in OPAL RTC driver Anton Blanchard
2013-09-23 2:05 ` [PATCH 32/39] powerpc/powernv: Fix some PCI sparse errors and one LE bug Anton Blanchard
2013-09-23 2:05 ` [PATCH 33/39] powerpc/hvsi: Fix endian issues in HVSI driver Anton Blanchard
2013-09-23 2:05 ` [PATCH 34/39] tty/hvc_opal: powerpc: Make OPAL HVC device tree accesses endian safe Anton Blanchard
2013-09-23 2:05 ` [PATCH 35/39] KVM: PPC: Disable KVM on little endian builds Anton Blanchard
2013-09-23 2:05 ` [PATCH 36/39] powerpc/kvm/book3s_hv: Add little endian guest support Anton Blanchard
2013-09-25 12:10 ` [PATCH] powerpc/kvmbook3s_hv: propagate H_SET_MODE to the host Laurent Dufour
2013-09-25 12:27 ` Greg Kurz
2013-09-25 22:31 ` Paul Mackerras
2013-09-27 8:14 ` Laurent Dufour
2013-09-27 13:59 ` [PATCH V2] powerpc/kvm/book3s_hv: propagate H_SET_MODE_RESOURCE_LE " Laurent Dufour
2013-09-27 14:45 ` Greg Kurz
2013-09-30 18:40 ` [PATCH 36/39] powerpc/kvm/book3s_hv: Add little endian guest support Alexander Graf
2013-09-23 2:05 ` [PATCH 37/39] powerpc: Add ability to build little endian kernels Anton Blanchard
2013-09-23 2:05 ` [PATCH 38/39] powerpc: Don't set HAVE_EFFICIENT_UNALIGNED_ACCESS on little endian builds Anton Blanchard
2013-09-23 2:05 ` [PATCH 39/39] powerpc: Work around little endian gcc bug Anton Blanchard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1379901913-5945-28-git-send-email-anton@samba.org \
--to=anton@samba.org \
--cc=benh@kernel.crashing.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=paulus@samba.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).