linuxppc-dev.lists.ozlabs.org archive mirror
 help / color / mirror / Atom feed
From: Sergey Miroshnichenko <s.miroshnichenko@yadro.com>
To: <linux-pci@vger.kernel.org>, <linuxppc-dev@lists.ozlabs.org>
Cc: Sergey Miroshnichenko <s.miroshnichenko@yadro.com>,
	Bjorn Helgaas <helgaas@kernel.org>,
	linux@yadro.com
Subject: [PATCH v5 08/23] PCI: Include fixed and immovable BARs into the bus size calculating
Date: Fri, 16 Aug 2019 19:50:46 +0300	[thread overview]
Message-ID: <20190816165101.911-9-s.miroshnichenko@yadro.com> (raw)
In-Reply-To: <20190816165101.911-1-s.miroshnichenko@yadro.com>

The only difference between the fixed/immovable and movable BARs is a size
and offset preservation after they are released (the corresponding struct
resource* detached from a bridge window for a while during a bus rescan).

Include fixed/immovable BARs into result of pbus_size_mem() and prohibit
assigning them to non-direct parents.

Signed-off-by: Sergey Miroshnichenko <s.miroshnichenko@yadro.com>
---
 drivers/pci/setup-bus.c | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c
index 1a731002ce18..2c250efca512 100644
--- a/drivers/pci/setup-bus.c
+++ b/drivers/pci/setup-bus.c
@@ -1011,12 +1011,21 @@ static int pbus_size_mem(struct pci_bus *bus, unsigned long mask,
 			struct resource *r = &dev->resource[i];
 			resource_size_t r_size;
 
-			if (r->parent || (r->flags & IORESOURCE_PCI_FIXED) ||
+			if (r->parent ||
 			    ((r->flags & mask) != type &&
 			     (r->flags & mask) != type2 &&
 			     (r->flags & mask) != type3))
 				continue;
 			r_size = resource_size(r);
+
+			if ((r->flags & IORESOURCE_PCI_FIXED) ||
+			    !pci_dev_movable_bars_supported(dev)) {
+				if (pci_movable_bars_enabled())
+					size += r_size;
+
+				continue;
+			}
+
 #ifdef CONFIG_PCI_IOV
 			/* Put SRIOV requested res to the optional list */
 			if (realloc_head && i >= PCI_IOV_RESOURCES &&
-- 
2.21.0


  parent reply	other threads:[~2019-08-16 17:09 UTC|newest]

Thread overview: 40+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-08-16 16:50 [PATCH v5 00/23] PCI: Allow BAR movement during hotplug Sergey Miroshnichenko
2019-08-16 16:50 ` [PATCH v5 01/23] PCI: Fix race condition in pci_enable/disable_device() Sergey Miroshnichenko
2019-08-22 12:37   ` Marta Rybczynska
2019-09-27 21:59   ` Bjorn Helgaas
2019-09-30  8:53     ` Sergey Miroshnichenko
2019-08-16 16:50 ` [PATCH v5 02/23] PCI: Enable bridge's I/O and MEM access for hotplugged devices Sergey Miroshnichenko
2019-09-27 22:01   ` Bjorn Helgaas
2019-08-16 16:50 ` [PATCH v5 03/23] PCI: hotplug: Add a flag for the movable BARs feature Sergey Miroshnichenko
2019-09-27 22:02   ` Bjorn Helgaas
2019-09-30  8:44     ` David Laight
2019-09-30 16:17       ` Sergey Miroshnichenko
2019-09-30 12:59     ` Sergey Miroshnichenko
2019-10-15 22:14       ` Bjorn Helgaas
2019-10-16 15:50         ` Sergey Miroshnichenko
2019-10-16 17:29           ` Bjorn Helgaas
2019-08-16 16:50 ` [PATCH v5 04/23] PCI: Define PCI-specific version of the release_child_resources() Sergey Miroshnichenko
2019-08-16 16:50 ` [PATCH v5 05/23] PCI: hotplug: movable BARs: Fix reassigning the released bridge windows Sergey Miroshnichenko
2019-08-16 16:50 ` [PATCH v5 06/23] PCI: hotplug: movable BARs: Recalculate all bridge windows during rescan Sergey Miroshnichenko
2019-08-16 16:50 ` [PATCH v5 07/23] PCI: hotplug: movable BARs: Don't allow added devices to steal resources Sergey Miroshnichenko
2019-08-16 16:50 ` Sergey Miroshnichenko [this message]
2019-08-16 16:50 ` [PATCH v5 09/23] PCI: Prohibit assigning BARs and bridge windows to non-direct parents Sergey Miroshnichenko
2019-08-16 16:50 ` [PATCH v5 10/23] PCI: hotplug: movable BARs: Try to assign unassigned resources only once Sergey Miroshnichenko
2019-08-16 16:50 ` [PATCH v5 11/23] PCI: hotplug: movable BARs: Calculate immovable parts of bridge windows Sergey Miroshnichenko
2019-08-16 16:50 ` [PATCH v5 12/23] PCI: hotplug: movable BARs: Compute limits for relocated " Sergey Miroshnichenko
2019-08-16 16:50 ` [PATCH v5 13/23] PCI: Make sure bridge windows include their fixed BARs Sergey Miroshnichenko
2019-08-16 16:50 ` [PATCH v5 14/23] PCI: Fix assigning the fixed prefetchable resources Sergey Miroshnichenko
2019-08-16 16:50 ` [PATCH v5 15/23] PCI: hotplug: movable BARs: Assign fixed and immovable BARs before others Sergey Miroshnichenko
2019-08-16 16:50 ` [PATCH v5 16/23] PCI: hotplug: movable BARs: Don't reserve IO/mem bus space Sergey Miroshnichenko
2019-09-04  5:42   ` Oliver O'Halloran
2019-09-04 11:22     ` Sergey Miroshnichenko
2019-08-16 16:50 ` [PATCH v5 17/23] powerpc/pci: Fix crash with enabled movable BARs Sergey Miroshnichenko
2019-08-16 16:50 ` [PATCH v5 18/23] powerpc/pci: Handle BAR movement Sergey Miroshnichenko
2019-09-04  5:37   ` Oliver O'Halloran
2019-09-06 16:24     ` Sergey Miroshnichenko
2019-09-09 14:02       ` Oliver O'Halloran
2019-08-16 16:50 ` [PATCH v5 19/23] PCI: hotplug: Configure MPS for hot-added bridges during bus rescan Sergey Miroshnichenko
2019-08-16 16:50 ` [PATCH v5 20/23] PCI: hotplug: movable BARs: Enable the feature by default Sergey Miroshnichenko
2019-08-16 16:50 ` [PATCH v5 21/23] nvme-pci: Handle movable BARs Sergey Miroshnichenko
2019-08-16 16:51 ` [PATCH v5 22/23] PCI/portdrv: Declare support of " Sergey Miroshnichenko
2019-08-16 16:51 ` [PATCH v5 23/23] PCI: pciehp: movable BARs: Trigger a domain rescan on hp events Sergey Miroshnichenko

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190816165101.911-9-s.miroshnichenko@yadro.com \
    --to=s.miroshnichenko@yadro.com \
    --cc=helgaas@kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=linux@yadro.com \
    --cc=linuxppc-dev@lists.ozlabs.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).