From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Sasha Levin <sashal@kernel.org>,
Chen Zhou <chenzhou10@huawei.com>,
netdev@vger.kernel.org, Hulk Robot <hulkci@huawei.com>,
linuxppc-dev@lists.ozlabs.org,
"David S . Miller" <davem@davemloft.net>
Subject: [PATCH AUTOSEL 4.14 091/186] net/wan/fsl_ucc_hdlc: remove set but not used variables 'ut_info' and 'ret'
Date: Fri, 14 Feb 2020 11:15:40 -0500 [thread overview]
Message-ID: <20200214161715.18113-91-sashal@kernel.org> (raw)
In-Reply-To: <20200214161715.18113-1-sashal@kernel.org>
From: Chen Zhou <chenzhou10@huawei.com>
[ Upstream commit 270fe2ceda66b6964d4c6f261d7f562a02c1c786 ]
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/net/wan/fsl_ucc_hdlc.c: In function ucc_hdlc_irq_handler:
drivers/net/wan/fsl_ucc_hdlc.c:643:23:
warning: variable ut_info set but not used [-Wunused-but-set-variable]
drivers/net/wan/fsl_ucc_hdlc.c: In function uhdlc_suspend:
drivers/net/wan/fsl_ucc_hdlc.c:880:23:
warning: variable ut_info set but not used [-Wunused-but-set-variable]
drivers/net/wan/fsl_ucc_hdlc.c: In function uhdlc_resume:
drivers/net/wan/fsl_ucc_hdlc.c:925:6:
warning: variable ret set but not used [-Wunused-but-set-variable]
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Chen Zhou <chenzhou10@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wan/fsl_ucc_hdlc.c | 14 +++++---------
1 file changed, 5 insertions(+), 9 deletions(-)
diff --git a/drivers/net/wan/fsl_ucc_hdlc.c b/drivers/net/wan/fsl_ucc_hdlc.c
index 6a26cef621935..c1e613e2c72c8 100644
--- a/drivers/net/wan/fsl_ucc_hdlc.c
+++ b/drivers/net/wan/fsl_ucc_hdlc.c
@@ -592,11 +592,9 @@ static irqreturn_t ucc_hdlc_irq_handler(int irq, void *dev_id)
struct ucc_hdlc_private *priv = (struct ucc_hdlc_private *)dev_id;
struct net_device *dev = priv->ndev;
struct ucc_fast_private *uccf;
- struct ucc_tdm_info *ut_info;
u32 ucce;
u32 uccm;
- ut_info = priv->ut_info;
uccf = priv->uccf;
ucce = ioread32be(uccf->p_ucce);
@@ -826,7 +824,6 @@ static void resume_clk_config(struct ucc_hdlc_private *priv)
static int uhdlc_suspend(struct device *dev)
{
struct ucc_hdlc_private *priv = dev_get_drvdata(dev);
- struct ucc_tdm_info *ut_info;
struct ucc_fast __iomem *uf_regs;
if (!priv)
@@ -838,7 +835,6 @@ static int uhdlc_suspend(struct device *dev)
netif_device_detach(priv->ndev);
napi_disable(&priv->napi);
- ut_info = priv->ut_info;
uf_regs = priv->uf_regs;
/* backup gumr guemr*/
@@ -871,7 +867,7 @@ static int uhdlc_resume(struct device *dev)
struct ucc_fast __iomem *uf_regs;
struct ucc_fast_private *uccf;
struct ucc_fast_info *uf_info;
- int ret, i;
+ int i;
u32 cecr_subblock;
u16 bd_status;
@@ -916,16 +912,16 @@ static int uhdlc_resume(struct device *dev)
/* Write to QE CECR, UCCx channel to Stop Transmission */
cecr_subblock = ucc_fast_get_qe_cr_subblock(uf_info->ucc_num);
- ret = qe_issue_cmd(QE_STOP_TX, cecr_subblock,
- (u8)QE_CR_PROTOCOL_UNSPECIFIED, 0);
+ qe_issue_cmd(QE_STOP_TX, cecr_subblock,
+ (u8)QE_CR_PROTOCOL_UNSPECIFIED, 0);
/* Set UPSMR normal mode */
iowrite32be(0, &uf_regs->upsmr);
/* init parameter base */
cecr_subblock = ucc_fast_get_qe_cr_subblock(uf_info->ucc_num);
- ret = qe_issue_cmd(QE_ASSIGN_PAGE_TO_DEVICE, cecr_subblock,
- QE_CR_PROTOCOL_UNSPECIFIED, priv->ucc_pram_offset);
+ qe_issue_cmd(QE_ASSIGN_PAGE_TO_DEVICE, cecr_subblock,
+ QE_CR_PROTOCOL_UNSPECIFIED, priv->ucc_pram_offset);
priv->ucc_pram = (struct ucc_hdlc_param __iomem *)
qe_muram_addr(priv->ucc_pram_offset);
--
2.20.1
next prev parent reply other threads:[~2020-02-14 19:13 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20200214161715.18113-1-sashal@kernel.org>
2020-02-14 16:14 ` [PATCH AUTOSEL 4.14 004/186] soc: fsl: qe: change return type of cpm_muram_alloc() to s32 Sasha Levin
2020-02-14 16:14 ` [PATCH AUTOSEL 4.14 017/186] powerpc/powernv/iov: Ensure the pdn for VFs always contains a valid PE number Sasha Levin
2020-02-14 16:14 ` [PATCH AUTOSEL 4.14 038/186] powerpc/pseries/vio: Fix iommu_table use-after-free refcount warning Sasha Levin
2020-02-14 16:15 ` [PATCH AUTOSEL 4.14 063/186] net/wan/fsl_ucc_hdlc: reject muram offsets above 64K Sasha Levin
2020-02-14 16:15 ` Sasha Levin [this message]
2020-02-14 16:15 ` [PATCH AUTOSEL 4.14 104/186] soc: fsl: qe: remove set but not used variable 'mm_gc' Sasha Levin
2020-02-14 16:16 ` [PATCH AUTOSEL 4.14 140/186] ide: remove set but not used variable 'hwif' Sasha Levin
2020-02-14 16:16 ` [PATCH AUTOSEL 4.14 155/186] powerpc/sriov: Remove VF eeh_dev state when disabling SR-IOV Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200214161715.18113-91-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=chenzhou10@huawei.com \
--cc=davem@davemloft.net \
--cc=hulkci@huawei.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=netdev@vger.kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).