From: Leonardo Bras <leobras.c@gmail.com>
To: Michael Ellerman <mpe@ellerman.id.au>,
Benjamin Herrenschmidt <benh@kernel.crashing.org>,
Paul Mackerras <paulus@samba.org>,
Leonardo Bras <leobras.c@gmail.com>,
Joel Stanley <joel@jms.id.au>,
Christophe Leroy <christophe.leroy@c-s.fr>,
Alexey Kardashevskiy <aik@ozlabs.ru>,
Thiago Jung Bauermann <bauerman@linux.ibm.com>,
Ram Pai <linuxram@us.ibm.com>,
Brian King <brking@linux.vnet.ibm.com>,
Murilo Fossa Vicentini <muvic@linux.ibm.com>,
David Dai <zdai@linux.vnet.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Subject: [PATCH v2 08/14] powerpc/pseries/iommu: Allow DDW windows starting at 0x00
Date: Fri, 11 Sep 2020 14:07:33 -0300 [thread overview]
Message-ID: <20200911170738.82818-9-leobras.c@gmail.com> (raw)
In-Reply-To: <20200911170738.82818-1-leobras.c@gmail.com>
Cc: linuxppc-dev@lists.ozlabs.org, linux-kernel@vger.kernel.org,
enable_ddw() currently returns the address of the DMA window, which is
considered invalid if has the value 0x00.
Also, it only considers valid an address returned from find_existing_ddw
if it's not 0x00.
Changing this behavior makes sense, given the users of enable_ddw() only
need to know if direct mapping is possible. It can also allow a DMA window
starting at 0x00 to be used.
This will be helpful for using a DDW with indirect mapping, as the window
address will be different than 0x00, but it will not map the whole
partition.
Signed-off-by: Leonardo Bras <leobras.c@gmail.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
---
arch/powerpc/platforms/pseries/iommu.c | 30 ++++++++++++--------------
1 file changed, 14 insertions(+), 16 deletions(-)
diff --git a/arch/powerpc/platforms/pseries/iommu.c b/arch/powerpc/platforms/pseries/iommu.c
index e4c17d27dcf3..bba8584a8f9d 100644
--- a/arch/powerpc/platforms/pseries/iommu.c
+++ b/arch/powerpc/platforms/pseries/iommu.c
@@ -849,24 +849,25 @@ static void remove_ddw(struct device_node *np, bool remove_prop)
np, ret);
}
-static u64 find_existing_ddw(struct device_node *pdn)
+static bool find_existing_ddw(struct device_node *pdn, u64 *dma_addr)
{
struct direct_window *window;
const struct dynamic_dma_window_prop *direct64;
- u64 dma_addr = 0;
+ bool found = false;
spin_lock(&direct_window_list_lock);
/* check if we already created a window and dupe that config if so */
list_for_each_entry(window, &direct_window_list, list) {
if (window->device == pdn) {
direct64 = window->prop;
- dma_addr = be64_to_cpu(direct64->dma_base);
+ *dma_addr = be64_to_cpu(direct64->dma_base);
+ found = true;
break;
}
}
spin_unlock(&direct_window_list_lock);
- return dma_addr;
+ return found;
}
static struct direct_window *ddw_list_new_entry(struct device_node *pdn,
@@ -1129,15 +1130,15 @@ static void reset_dma_window(struct pci_dev *dev, struct device_node *par_dn)
* pdn: the parent pe node with the ibm,dma_window property
* Future: also check if we can remap the base window for our base page size
*
- * returns the dma offset for use by the direct mapped DMA code.
+ * returns true if can map all pages (direct mapping), false otherwise..
*/
-static u64 enable_ddw(struct pci_dev *dev, struct device_node *pdn)
+static bool enable_ddw(struct pci_dev *dev, struct device_node *pdn)
{
int len, ret;
struct ddw_query_response query;
struct ddw_create_response create;
int page_shift;
- u64 dma_addr, max_addr;
+ u64 max_addr;
struct device_node *dn;
u32 ddw_avail[DDW_APPLICABLE_SIZE];
struct direct_window *window;
@@ -1148,8 +1149,7 @@ static u64 enable_ddw(struct pci_dev *dev, struct device_node *pdn)
mutex_lock(&direct_window_init_mutex);
- dma_addr = find_existing_ddw(pdn);
- if (dma_addr != 0)
+ if (find_existing_ddw(pdn, &dev->dev.archdata.dma_offset))
goto out_unlock;
/*
@@ -1296,7 +1296,7 @@ static u64 enable_ddw(struct pci_dev *dev, struct device_node *pdn)
list_add(&window->list, &direct_window_list);
spin_unlock(&direct_window_list_lock);
- dma_addr = be64_to_cpu(ddwprop->dma_base);
+ dev->dev.archdata.dma_offset = be64_to_cpu(ddwprop->dma_base);
goto out_unlock;
out_free_window:
@@ -1309,6 +1309,7 @@ static u64 enable_ddw(struct pci_dev *dev, struct device_node *pdn)
kfree(win64->name);
kfree(win64->value);
kfree(win64);
+ win64 = NULL;
out_failed:
if (default_win_removed)
@@ -1322,7 +1323,7 @@ static u64 enable_ddw(struct pci_dev *dev, struct device_node *pdn)
out_unlock:
mutex_unlock(&direct_window_init_mutex);
- return dma_addr;
+ return win64;
}
static void pci_dma_dev_setup_pSeriesLP(struct pci_dev *dev)
@@ -1401,11 +1402,8 @@ static bool iommu_bypass_supported_pSeriesLP(struct pci_dev *pdev, u64 dma_mask)
break;
}
- if (pdn && PCI_DN(pdn)) {
- pdev->dev.archdata.dma_offset = enable_ddw(pdev, pdn);
- if (pdev->dev.archdata.dma_offset)
- return true;
- }
+ if (pdn && PCI_DN(pdn))
+ return enable_ddw(pdev, pdn);
return false;
}
--
2.25.4
next prev parent reply other threads:[~2020-09-11 17:31 UTC|newest]
Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-09-11 17:07 [PATCH v2 00/14] DDW Indirect Mapping Leonardo Bras
2020-09-11 17:07 ` [PATCH v2 01/14] powerpc/pseries/iommu: Replace hard-coded page shift Leonardo Bras
2020-09-29 3:56 ` Alexey Kardashevskiy
2020-09-29 18:25 ` Leonardo Bras
2020-09-11 17:07 ` [PATCH v2 02/14] powerpc/pseries/iommu: Makes sure IOMMU_PAGE_SIZE <= PAGE_SIZE Leonardo Bras
2020-09-29 3:57 ` Alexey Kardashevskiy
2020-09-11 17:07 ` [PATCH v2 03/14] powerpc/kernel/iommu: Align size for IOMMU_PAGE_SIZE() to save TCEs Leonardo Bras
2020-09-29 3:57 ` Alexey Kardashevskiy
2020-09-11 17:07 ` [PATCH v2 04/14] powerpc/kernel/iommu: Use largepool as a last resort when !largealloc Leonardo Bras
2020-09-11 17:07 ` [PATCH v2 05/14] powerpc/kernel/iommu: Add new iommu_table_in_use() helper Leonardo Bras
2020-09-29 3:57 ` Alexey Kardashevskiy
2021-04-11 6:55 ` Leonardo Bras
2020-09-11 17:07 ` [PATCH v2 06/14] powerpc/pseries/iommu: Add iommu_pseries_alloc_table() helper Leonardo Bras
2020-09-11 17:07 ` [PATCH v2 07/14] powerpc/pseries/iommu: Add ddw_list_new_entry() helper Leonardo Bras
2020-09-29 3:57 ` Alexey Kardashevskiy
2020-09-11 17:07 ` Leonardo Bras [this message]
2020-09-11 17:07 ` [PATCH v2 09/14] powerpc/pseries/iommu: Add ddw_property_create() and refactor enable_ddw() Leonardo Bras
2020-09-29 3:56 ` Alexey Kardashevskiy
2021-04-11 7:52 ` Leonardo Bras
2020-09-11 17:07 ` [PATCH v2 10/14] powerpc/pseries/iommu: Reorganize iommu_table_setparms*() with new helper Leonardo Bras
2020-09-29 3:56 ` Alexey Kardashevskiy
2021-04-11 8:16 ` Leonardo Bras
2020-09-11 17:07 ` [PATCH v2 11/14] powerpc/pseries/iommu: Update remove_dma_window() to accept property name Leonardo Bras
2020-09-29 3:56 ` Alexey Kardashevskiy
2021-04-13 5:44 ` Leonardo Bras
2020-09-11 17:07 ` [PATCH v2 12/14] powerpc/pseries/iommu: Find existing DDW with given " Leonardo Bras
2020-09-11 17:07 ` [PATCH v2 13/14] powerpc/pseries/iommu: Make use of DDW for indirect mapping Leonardo Bras
2020-09-29 3:56 ` Alexey Kardashevskiy
2021-04-13 5:49 ` Leonardo Bras
2021-04-13 7:18 ` Alexey Kardashevskiy
2021-04-13 7:33 ` Leonardo Bras
2021-04-13 7:41 ` Alexey Kardashevskiy
2021-04-13 7:58 ` Leonardo Bras
2021-04-13 8:24 ` Alexey Kardashevskiy
2021-04-13 23:01 ` Leonardo Bras
2020-09-11 17:07 ` [PATCH v2 14/14] powerpc/pseries/iommu: Rename "direct window" to "dma window" Leonardo Bras
2020-09-29 3:55 ` Alexey Kardashevskiy
2020-09-29 20:54 ` Leonardo Bras
2020-09-30 7:29 ` Alexey Kardashevskiy
2021-04-13 6:03 ` Leonardo Bras
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200911170738.82818-9-leobras.c@gmail.com \
--to=leobras.c@gmail.com \
--cc=aik@ozlabs.ru \
--cc=bauerman@linux.ibm.com \
--cc=benh@kernel.crashing.org \
--cc=brking@linux.vnet.ibm.com \
--cc=christophe.leroy@c-s.fr \
--cc=joel@jms.id.au \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=linuxram@us.ibm.com \
--cc=mpe@ellerman.id.au \
--cc=muvic@linux.ibm.com \
--cc=paulus@samba.org \
--cc=zdai@linux.vnet.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).