From: "laurent.miaille" <laurent.miaille@sierbla.com>
To: <linux-kernel@vger.kernel.org>
Subject: PROBLEM
Date: Tue, 21 Oct 2003 15:39:06 +0200 [thread overview]
Message-ID: <000e01c397d8$b31cb900$69c809c0@sierbla.int> (raw)
[-- Attachment #1: Type: text/plain, Size: 419 bytes --]
Hi,
Here's a bug report we had yesterday:
The machine was completely stopped, keyboard and mouse
were not active, we could ping the machine but no access to its files.
Only one solution: reboot the machine. We ' re looking for some
information about this crash. Thanks a lot if you can help us.
I send you a .txt file with all the kernel information and the last
lines in the log we had.
Thanks a lot.
Laurent.
[-- Attachment #2: bug_report_21_10_03.txt --]
[-- Type: text/plain, Size: 12474 bytes --]
Last lines before crashing we had in the logs:
Oct 18 04:44:07 juliette kernel: kernel BUG at dcache.c:362!
Oct 18 04:44:07 juliette kernel: invalid operand: 0000
Oct 18 04:44:07 juliette kernel: ide-cd cdrom cmpci soundcore radeon agpgart nfsd parport_pc lp parport autofs
Oct 18 04:44:07 juliette kernel: CPU: 0
Oct 18 04:44:07 juliette kernel: EIP: 0010:[<c01538d1>] Not tainted
Oct 18 04:44:07 juliette kernel: EFLAGS: 00013202
Oct 18 04:44:07 juliette kernel:
Oct 18 04:44:07 juliette kernel: EIP is at prune_dcache [kernel] 0x91 (2.4.18-14)
Oct 18 04:44:07 juliette kernel: eax: 00000020 ebx: ccae5db8 ecx: ccae5000 edx: ccae5e38
Oct 18 04:44:07 juliette kernel: esi: ccae5da0 edi: dc3ff3e0 ebp: 00007038 esp: dffddfac
Oct 18 04:44:07 juliette kernel: ds: 0018 es: 0018 ss: 0018
Oct 18 04:44:07 juliette kernel: Process kswapd (pid: 5, stackpage=dffdd000)
Oct 18 04:44:07 juliette kernel: Stack: df048360 ccae5d20 dffdc000 00000054 dffdc000 00000000 dffdc245 0008e000
Oct 18 04:44:07 juliette kernel: c0153d04 00009188 c0136c2e 00000006 000001f0 c23a0018 00010f00 c23a5fb8
Oct 18 04:44:07 juliette kernel: c0105000 c010744e 00000000 c0136b60 00000000
Oct 18 04:44:07 juliette kernel: Call Trace: [<c0153d04>] shrink_dcache_memory [kernel] 0x24 (0xdffddfcc))
Oct 18 04:44:07 juliette kernel: [<c0136c2e>] kswapd [kernel] 0xce (0xdffddfd4))
Oct 18 04:44:07 juliette kernel: [<c0105000>] stext [kernel] 0x0 (0xdffddfec))
Oct 18 04:44:07 juliette kernel: [<c010744e>] kernel_thread [kernel] 0x2e (0xdffddff0))
Oct 18 04:44:07 juliette kernel: [<c0136b60>] kswapd [kernel] 0x0 (0xdffddff8))
Oct 18 04:44:07 juliette kernel:
Oct 18 04:44:07 juliette kernel:
Oct 18 04:44:07 juliette kernel: Code: 0f 0b 6a 01 82 aa 25 c0 8d 43 f8 8b 48 04 8b 53 f8 89 11 89
Kernel Information:
Kernel Version:
Linux version 2.4.18-14 (bhcompile@stripples.devel.redhat.com)
(gcc version 3.2 20020903 (Red Hat Linux 8.0 3.2-7)) #1 Wed Sep 4 13:35:50 EDT 2002
Processor information:
processor : 0
vendor_id : GenuineIntel
cpu family : 15
model : 2
model name : Intel(R) Pentium(R) 4 CPU 1.80GHz
stepping : 4
cpu MHz : 1816.131
cache size : 512 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov
pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm
bogomips : 3609.95
Module information:
ide-cd 33608 0 (autoclean)
cdrom 33696 0 (autoclean) [ide-cd]
cmpci 35944 0 (autoclean)
soundcore 6532 4 (autoclean) [cmpci]
radeon 93976 1
agpgart 43072 3
nfsd 79920 8 (autoclean)
parport_pc 19108 1 (autoclean)
lp 8996 0 (autoclean)
parport 37152 1 (autoclean) [parport_pc lp]
autofs 13348 0 (autoclean) (unused)
nfs 82564 1 (autoclean)
lockd 58064 1 (autoclean) [nfsd nfs]
sunrpc 79324 1 (autoclean) [nfsd nfs lockd]
3c59x 30640 1
iptable_filter 2412 0 (autoclean) (unused)
ip_tables 14936 1 [iptable_filter]
aic7xxx 137204 2 (autoclean)
sd_mod 13584 4 (autoclean)
scsi_mod 107176 2 (autoclean) [aic7xxx sd_mod]
mousedev 5524 1
keybdev 2976 0 (unused)
hid 22244 0 (unused)
input 5888 0 [mousedev keybdev hid]
usb-uhci 26188 0 (unused)
usbcore 77024 1 [hid usb-uhci]
ext3 70368 9
jbd 52212 9 [ext3]
Loaded driver and hardware information:
- ioports:
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0070-007f : rtc
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
02f8-02ff : serial(auto)
0330-0331 : cmpci Midi
0376-0376 : ide1
0378-037a : parport0
0388-038b : cmpci FM
03c0-03df : vga+
03f6-03f6 : ide0
03f8-03ff : serial(auto)
0cf8-0cff : PCI conf1
a000-a01f : Intel Corp. 82801BA/BAM USB (Hub #2)
a000-a01f : usb-uhci
a400-a41f : Intel Corp. 82801BA/BAM USB (Hub #1)
a400-a41f : usb-uhci
a800-a80f : Intel Corp. 82801BA IDE U100
a800-a807 : ide0
a808-a80f : ide1
b000-bfff : PCI Bus #02
b000-b07f : 3Com Corporation 3c905C-TX/TX-M [Tornado]
b000-b07f : 02:0c.0
b400-b4ff : Adaptec AHA-7850
b800-b8ff : C-Media Electronics Inc CM8738
b800-b8ff : cmpci
d000-dfff : PCI Bus #01
d800-d8ff : ATI Technologies Inc Radeon VE QY
- iomem:
00000000-0009fbff : System RAM
0009fc00-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000f0000-000fffff : System ROM
00100000-1ffebfff : System RAM
00100000-0024b8dd : Kernel code
0024b8de-003457a3 : Kernel data
1ffec000-1ffeefff : ACPI Tables
1ffef000-1fffefff : reserved
1ffff000-1fffffff : ACPI Non-volatile Storage
ee000000-eeffffff : PCI Bus #02
ee000000-ee00007f : 3Com Corporation 3c905C-TX/TX-M [Tornado]
ee800000-ee800fff : Adaptec AHA-7850
ee800000-ee800fff : aic7xxx
ef000000-efdfffff : PCI Bus #01
ef000000-ef00ffff : ATI Technologies Inc Radeon VE QY
efe00000-efefffff : PCI Bus #02
eff00000-f7ffffff : PCI Bus #01
f0000000-f7ffffff : ATI Technologies Inc Radeon VE QY
f8000000-fbffffff : Intel Corp. 82845 845 (Brookdale) Chipset Host Bridge
fec00000-fec00fff : reserved
fee00000-fee00fff : reserved
ffff0000-ffffffff : reserved
PCI information:
00:00.0 Host bridge: Intel Corp. 82845 845 (Brookdale) Chipset Host Bridge (rev 04)
Subsystem: Asustek Computer, Inc.: Unknown device 8070
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 0
Region 0: Memory at f8000000 (32-bit, prefetchable) [size=64M]
Capabilities: [e4] #09 [9104]
Capabilities: [a0] AGP version 2.0
Status: RQ=31 SBA+ 64bit- FW+ Rate=x1,x2,x4
Command: RQ=0 SBA+ AGP+ 64bit- FW- Rate=x1
00:01.0 PCI bridge: Intel Corp. 82845 845 (Brookdale) Chipset AGP Bridge (rev 04) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: ef000000-efdfffff
Prefetchable memory behind bridge: eff00000-f7ffffff
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
00:1e.0 PCI bridge: Intel Corp. 82801BA/CA/DB PCI Bridge (rev 05) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: ee000000-eeffffff
Prefetchable memory behind bridge: efe00000-efefffff
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
00:1f.0 ISA bridge: Intel Corp. 82801BA ISA Bridge (LPC) (rev 05)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:1f.1 IDE interface: Intel Corp. 82801BA IDE U100 (rev 05) (prog-if 80 [Master])
Subsystem: Asustek Computer, Inc.: Unknown device 8028
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Region 0: [virtual] I/O ports at 01f0
Region 1: [virtual] I/O ports at 03f4
Region 2: [virtual] I/O ports at 0170
Region 3: [virtual] I/O ports at 0374
Region 4: I/O ports at a800 [size=16]
00:1f.2 USB Controller: Intel Corp. 82801BA/BAM USB (Hub #1) (rev 05) (prog-if 00 [UHCI])
Subsystem: Asustek Computer, Inc.: Unknown device 8028
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin D routed to IRQ 10
Region 4: I/O ports at a400 [size=32]
00:1f.4 USB Controller: Intel Corp. 82801BA/BAM USB (Hub #2) (rev 05) (prog-if 00 [UHCI])
Subsystem: Asustek Computer, Inc.: Unknown device 8028
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin C routed to IRQ 9
Region 4: I/O ports at a000 [size=32]
01:00.0 VGA compatible controller: ATI Technologies Inc Radeon VE QY (prog-if 00 [VGA])
Subsystem: Palit Microsystems Inc.: Unknown device 5159
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (2000ns min), cache line size 08
Interrupt: pin A routed to IRQ 11
Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M]
Region 1: I/O ports at d800 [size=256]
Region 2: Memory at ef000000 (32-bit, non-prefetchable) [size=64K]
Expansion ROM at effe0000 [disabled] [size=128K]
Capabilities: [58] AGP version 2.0
Status: RQ=47 SBA+ 64bit- FW- Rate=x1,x2,x4
Command: RQ=31 SBA+ AGP+ 64bit- FW- Rate=x1
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
02:03.0 Multimedia audio controller: C-Media Electronics Inc CM8738 (rev 10)
Subsystem: Asustek Computer, Inc. CMI8738 6ch-MX
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (500ns min, 6000ns max)
Interrupt: pin A routed to IRQ 9
Region 0: I/O ports at b800 [size=256]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
02:09.0 SCSI storage controller: Adaptec AHA-7850 (rev 03)
Subsystem: Adaptec AHA-2904/Integrated AIC-7850
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (1000ns min, 1000ns max), cache line size 08
Interrupt: pin A routed to IRQ 9
Region 0: I/O ports at b400 [disabled] [size=256]
Region 1: Memory at ee800000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
02:0c.0 Ethernet controller: 3Com Corporation 3c905C-TX/TX-M [Tornado] (rev 78)
Subsystem: 3Com Corporation 3C905C-TX Fast Etherlink for PC Management NIC
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (2500ns min, 2500ns max), cache line size 08
Interrupt: pin A routed to IRQ 5
Region 0: I/O ports at b000 [size=128]
Region 1: Memory at ee000000 (32-bit, non-prefetchable) [size=128]
Expansion ROM at <unassigned> [disabled] [size=128K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=2 PME-
next reply other threads:[~2003-10-21 13:40 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-10-21 13:39 laurent.miaille [this message]
-- strict thread matches above, loose matches on Subject: below --
2007-04-27 1:35 PROBLEM Thomas Kayser
2006-02-03 12:02 PROBLEM Badri Pillai
2004-12-24 4:22 PROBLEM Scott Mollica
2004-12-27 3:28 ` PROBLEM Adrian Bunk
2003-12-19 18:10 PROBLEM Federico Freire
2003-12-19 18:25 ` PROBLEM Jean-Philippe Woot de Trixhe
2003-12-19 19:29 ` PROBLEM Jose Luis Domingo Lopez
2003-11-30 4:07 PROBLEM Mike Morrell
2003-11-30 6:05 ` PROBLEM Chris Ernst
2003-03-13 21:40 Problem Smiler
2003-03-09 11:49 PROBLEM Kósa Ferenc
2003-03-09 12:55 ` PROBLEM John Bradford
2002-12-31 16:19 Problem Amar Lior
2002-12-31 17:38 ` Problem Hugh Dickins
2002-12-31 16:18 PROBLEM Amar Lior
2002-08-29 19:55 Problem Ryan White
2002-08-14 14:20 PROBLEM Bob Kruger
2001-09-11 23:16 Problem George Lloyd
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='000e01c397d8$b31cb900$69c809c0@sierbla.int' \
--to=laurent.miaille@sierbla.com \
--cc=administrateur@sierbla.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).