From: Baolin Wang <baolin.wang@linaro.org>
To: sre@kernel.org
Cc: orsonzhai@gmail.com, zhang.lyra@gmail.com,
yuanjiang.yu@unisoc.com, baolin.wang@linaro.org,
vincent.guittot@linaro.org, linux-pm@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [PATCH 3/6] power: supply: sc27xx: Fix the the accuracy issue of coulomb calculation
Date: Wed, 31 Jul 2019 18:00:25 +0800 [thread overview]
Message-ID: <0e86ed1f992d2eb99fd4abb9e0c51ca2c4ccd4eb.1564566425.git.baolin.wang@linaro.org> (raw)
In-Reply-To: <cover.1564566425.git.baolin.wang@linaro.org>
In-Reply-To: <cover.1564566425.git.baolin.wang@linaro.org>
From: Yuanjiang Yu <yuanjiang.yu@unisoc.com>
The Spreadtrum fuel gauge will multiply by 2 for counting the coulomb
counter to improve the accuracy, which means the value saved in fuel
gauge is: coulomb counter * 2 * 1000ma_adc. Thus fix the conversion
formular to improve the accuracy of calculating the battery capacity.
Signed-off-by: Yuanjiang Yu <yuanjiang.yu@unisoc.com>
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
---
drivers/power/supply/sc27xx_fuel_gauge.c | 11 ++++-------
1 file changed, 4 insertions(+), 7 deletions(-)
diff --git a/drivers/power/supply/sc27xx_fuel_gauge.c b/drivers/power/supply/sc27xx_fuel_gauge.c
index ca7b73e..ab3afa1 100644
--- a/drivers/power/supply/sc27xx_fuel_gauge.c
+++ b/drivers/power/supply/sc27xx_fuel_gauge.c
@@ -326,8 +326,6 @@ static int sc27xx_fgu_set_clbcnt(struct sc27xx_fgu_data *data, int clbcnt)
{
int ret;
- clbcnt *= SC27XX_FGU_SAMPLE_HZ;
-
ret = regmap_update_bits(data->regmap,
data->base + SC27XX_FGU_CLBCNT_SETL,
SC27XX_FGU_CLBCNT_MASK, clbcnt);
@@ -362,7 +360,6 @@ static int sc27xx_fgu_get_clbcnt(struct sc27xx_fgu_data *data, int *clb_cnt)
*clb_cnt = ccl & SC27XX_FGU_CLBCNT_MASK;
*clb_cnt |= (cch & SC27XX_FGU_CLBCNT_MASK) << SC27XX_FGU_CLBCNT_SHIFT;
- *clb_cnt /= SC27XX_FGU_SAMPLE_HZ;
return 0;
}
@@ -380,10 +377,10 @@ static int sc27xx_fgu_get_capacity(struct sc27xx_fgu_data *data, int *cap)
/*
* Convert coulomb counter to delta capacity (mAh), and set multiplier
- * as 100 to improve the precision.
+ * as 10 to improve the precision.
*/
- temp = DIV_ROUND_CLOSEST(delta_clbcnt, 360);
- temp = sc27xx_fgu_adc_to_current(data, temp);
+ temp = DIV_ROUND_CLOSEST(delta_clbcnt * 10, 36 * SC27XX_FGU_SAMPLE_HZ);
+ temp = sc27xx_fgu_adc_to_current(data, temp / 1000);
/*
* Convert to capacity percent of the battery total capacity,
@@ -790,7 +787,7 @@ static int sc27xx_fgu_cap_to_clbcnt(struct sc27xx_fgu_data *data, int capacity)
* Convert current capacity (mAh) to coulomb counter according to the
* formula: 1 mAh =3.6 coulomb.
*/
- return DIV_ROUND_CLOSEST(cur_cap * 36 * data->cur_1000ma_adc, 10);
+ return DIV_ROUND_CLOSEST(cur_cap * 36 * data->cur_1000ma_adc * SC27XX_FGU_SAMPLE_HZ, 10);
}
static int sc27xx_fgu_calibration(struct sc27xx_fgu_data *data)
--
1.7.9.5
next prev parent reply other threads:[~2019-07-31 10:01 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-07-31 10:00 [PATCH 0/6] Optimize the Spreadtrum SC27xx fuel gauge Baolin Wang
2019-07-31 10:00 ` [PATCH 1/6] power: supply: sc27xx: Add POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN attribute Baolin Wang
2019-07-31 10:00 ` [PATCH 2/6] power: supply: sc27xx: Fix conditon to enable the FGU interrupt Baolin Wang
2019-07-31 10:00 ` Baolin Wang [this message]
2019-07-31 10:00 ` [PATCH 4/6] power: supply: sc27xx: Optimize the battery capacity calibration Baolin Wang
2019-07-31 10:00 ` [PATCH 5/6] power: supply: sc27xx: Make sure the alarm capacity is larger than 0 Baolin Wang
2019-07-31 10:00 ` [PATCH 6/6] power: supply: sc27xx: Add POWER_SUPPLY_PROP_CALIBRATE attribute Baolin Wang
2019-09-02 21:04 ` [PATCH 0/6] Optimize the Spreadtrum SC27xx fuel gauge Sebastian Reichel
2019-09-03 1:34 ` Baolin Wang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=0e86ed1f992d2eb99fd4abb9e0c51ca2c4ccd4eb.1564566425.git.baolin.wang@linaro.org \
--to=baolin.wang@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=orsonzhai@gmail.com \
--cc=sre@kernel.org \
--cc=vincent.guittot@linaro.org \
--cc=yuanjiang.yu@unisoc.com \
--cc=zhang.lyra@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).