From: "Trever L. Adams" <tadams-lists@myrealbox.com>
To: Zwane Mwaikambo <zwane@arm.linux.org.uk>
Cc: Linux Kernel Mailing List <linux-kernel@vger.kernel.org>
Subject: Re: 2.6.0test 1 fails on eth0 up (arjanv RPM's - all needed rpms installed)
Date: 16 Jul 2003 23:11:25 -0400 [thread overview]
Message-ID: <1058411485.4705.20.camel@aurora.localdomain> (raw)
In-Reply-To: <Pine.LNX.4.53.0307160148420.32541@montezuma.mastecende.com>
On Wed, 2003-07-16 at 14:59, Zwane Mwaikambo wrote:
> Can you capture that message? Perhaps your network card and sound card
> share an interrupt?
>
> Zwane
Sure, I sent it to the list already, here it is again. This is some
time before the ethernet card driver gets loaded, etc. Hopefully this
helps clear things up.
kernel: ehci_hcd 0000:00:02.2: PCI device 10de:0068 (nVidia Corporation)
kernel: irq 3: nobody cared!
kernel: Call Trace:
kernel: [<c010c12a>] __report_bad_irq+0x2a/0x90
kernel: [<c010c21c>] note_interrupt+0x6c/0xb0
kernel: [<c010c42d>] do_IRQ+0xed/0x110
kernel: [<c010a9f8>] common_interrupt+0x18/0x20
kernel: [<c011f700>] do_softirq+0x40/0xa0
kernel: [<c010c414>] do_IRQ+0xd4/0x110
kernel: [<c010a9f8>] common_interrupt+0x18/0x20
kernel: [<c010c84e>] setup_irq+0x6e/0xb0
kernel: [<e087e310>] usb_hcd_irq+0x0/0x60 [usbcore]
kernel: [<c010c4d0>] request_irq+0x80/0xd0
kernel: [<e08813f6>] usb_hcd_pci_probe+0x1d6/0x440 [usbcore]
kernel: [<e087e310>] usb_hcd_irq+0x0/0x60 [usbcore]
kernel: [<c0180033>] t_start+0x43/0x50
kernel: [<c01a92f2>] pci_device_probe_static+0x52/0x70
kernel: [<c01a940c>] __pci_device_probe+0x3c/0x50
kernel: [<c01a944f>] pci_device_probe+0x2f/0x50
kernel: [<c01ea715>] bus_match+0x45/0x80
kernel: [<c01ea82c>] driver_attach+0x5c/0x60
kernel: [<c01eab17>] bus_add_driver+0xa7/0xc0
kernel: [<c01eaf9f>] driver_register+0x2f/0x40
kernel: [<c01a9700>] pci_register_driver+0x70/0xa0
kernel: [<e0824021>] init+0x21/0x4f [ehci_hcd]
kernel: [<c01303bb>] sys_init_module+0x10b/0x1e0
kernel: [<c010a839>] sysenter_past_esp+0x52/0x71
kernel: handlers:
kernel: [<e087e310>] (usb_hcd_irq+0x0/0x60 [usbcore])
kernel: Disabling IRQ #3
kernel: ehci_hcd 0000:00:02.2: irq 3, pci mem e0815000
kernel: ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus
number 1
CPU0
0: 4758778 XT-PIC timer
1: 56138 XT-PIC keyboard
2: 0 XT-PIC cascade
3: 6726 XT-PIC ehci-hcd, NVIDIA nForce Audio
5: 0 XT-PIC ohci1394
8: 1 XT-PIC rtc
11: 179558 XT-PIC usb-ohci, usb-ohci, eth0
12: 509617 XT-PIC PS/2 Mouse
14: 378329 XT-PIC ide0
15: 657852 XT-PIC ide1
Trever
--
"I conceive that a great part of the miseries of mankind are brought
upon them by the false estimates they have made of the value of things."
-- Benjamin Franklin
next prev parent reply other threads:[~2003-07-17 2:56 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-07-14 18:56 2.6.0test 1 fails on eth0 up (arjanv RPM's - all needed rpms installed) Trever L. Adams
2003-07-14 19:06 ` Jeff Garzik
2003-07-14 19:15 ` Arjan van de Ven
2003-07-14 21:20 ` Trever L. Adams
2003-07-15 20:10 ` [More Info] " Trever L. Adams
2003-07-15 21:02 ` Greg KH
2003-07-15 20:55 ` jds
2003-07-15 23:15 ` David Brownell
2003-07-26 0:06 ` David Brownell
2003-07-31 6:42 ` Trever L. Adams
2003-07-31 17:15 ` David Brownell
2003-07-16 18:59 ` Zwane Mwaikambo
2003-07-17 3:11 ` Trever L. Adams [this message]
[not found] ` <Pine.LNX.4.53.0307170254500.32541@montezuma.mastecende.com>
2003-07-17 14:46 ` Trever L. Adams
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1058411485.4705.20.camel@aurora.localdomain \
--to=tadams-lists@myrealbox.com \
--cc=linux-kernel@vger.kernel.org \
--cc=zwane@arm.linux.org.uk \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).