From: Craig Bradney <cbradney@zip.com.au>
To: linux-kernel@vger.kernel.org
Subject: Re: Catching NForce2 lockup with NMI watchdog
Date: Sat, 06 Dec 2003 00:11:04 +0100 [thread overview]
Message-ID: <1070665864.3962.19.camel@athlonxp.bradney.info> (raw)
In-Reply-To: <20031205225554.GT29119@mis-mike-wstn.matchmail.com>
On Fri, 2003-12-05 at 23:55, Mike Fedyk wrote:
> On Fri, Dec 05, 2003 at 11:11:39AM -0800, Allen Martin wrote:
> > NVIDIA doesn't provide a windows driver to setup APIC interrupts. APIC
> > functionality is exported through the ACPI methods and MP table in the
> > system BIOS which the motherboard vendors supply.
> >
> > Likely the root of the problem has to do with the way the Linux kernel is
> > using the ACPI methods to setup the interrupts which is different from win
> > 9x/2k/XP. I can help track this down, unfortunately so far I've been unable
> > to reproduce the hangs on any of the boards I have.
>
> Can the people with nforce chips run a command that will show the chipset
> config space like was done back when there were problems with via chipsets
> (before via released the specs on how to set the bits correctly).
>
> Maybe you'll see some correlation between the boards that are crashing, and
> a few bits that are different for the boards that aren't crashing.
> -
Is there such a command? or is that your question? Ready to run it as
soon as someone lets me know.
Craig
Uptime: 6.5 hours
next prev parent reply other threads:[~2003-12-05 23:11 UTC|newest]
Thread overview: 62+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-12-05 19:11 Catching NForce2 lockup with NMI watchdog Allen Martin
2003-12-05 20:18 ` cheuche+lkml
2003-12-05 20:34 ` Prakash K. Cheemplavam
2003-12-05 21:02 ` Mike Fedyk
2003-12-05 20:55 ` Jesse Allen
2003-12-06 3:20 ` Jesse Allen
2003-12-05 20:36 ` Jesse Allen
2003-12-05 22:55 ` Mike Fedyk
2003-12-05 23:11 ` Craig Bradney [this message]
-- strict thread matches above, loose matches on Subject: below --
2003-12-17 18:14 Ross Dickson
2003-12-17 21:41 ` George Anzinger
2003-12-17 21:48 ` George Anzinger
2003-12-18 1:30 ` Ross Dickson
2003-12-18 14:32 ` Maciej W. Rozycki
2003-12-19 4:17 ` Ross Dickson
2003-12-19 15:35 ` Maciej W. Rozycki
2003-12-18 14:04 ` Maciej W. Rozycki
2003-12-18 14:22 ` Craig Bradney
2003-12-19 5:38 ` Ross Dickson
2003-12-19 10:36 ` Craig Bradney
2003-12-19 4:06 ` Ross Dickson
2003-12-19 15:33 ` Maciej W. Rozycki
2003-12-13 3:56 Ross Dickson
2003-12-15 13:16 ` Maciej W. Rozycki
2003-12-07 19:58 Fixes for nforce2 hard lockup, apic, io-apic, udma133 covered Ian Kumlien
2003-12-08 2:07 ` Ross Dickson
2003-12-09 18:12 ` Catching NForce2 lockup with NMI watchdog Ian Kumlien
2003-12-09 22:04 ` Craig Bradney
2003-12-09 23:13 ` Ian Kumlien
2003-12-10 6:14 ` Bob
2003-12-10 7:51 ` Craig Bradney
2003-12-05 22:41 b
2003-12-05 20:56 Allen Martin
2003-12-05 4:54 Jesse Allen
2003-12-05 7:40 ` Mikael Pettersson
2003-12-05 8:33 ` Josh McKinney
2003-12-05 12:14 ` Mikael Pettersson
2003-12-05 14:19 ` Craig Bradney
2003-12-05 17:05 ` Craig Bradney
2003-12-05 18:11 ` Josh McKinney
2003-12-05 8:58 ` Mike Fedyk
2003-12-05 12:06 ` Mikael Pettersson
2003-12-08 2:20 ` Bob
2003-12-09 14:21 ` Maciej W. Rozycki
2003-12-09 16:35 ` Bob
2003-12-10 13:41 ` Maciej W. Rozycki
2003-12-12 16:01 ` bill davidsen
2003-12-12 16:47 ` Maciej W. Rozycki
2003-12-12 16:57 ` Richard B. Johnson
2003-12-12 17:21 ` Maciej W. Rozycki
2003-12-13 5:16 ` Bill Davidsen
2003-12-15 13:23 ` Maciej W. Rozycki
2003-12-12 22:27 ` George Anzinger
2003-12-15 13:13 ` Maciej W. Rozycki
2003-12-15 21:42 ` George Anzinger
2003-12-16 13:37 ` Maciej W. Rozycki
2003-12-16 13:57 ` Richard B. Johnson
2003-12-16 15:47 ` Maciej W. Rozycki
2003-12-16 16:44 ` Richard B. Johnson
2003-12-16 16:50 ` Maciej W. Rozycki
2003-12-16 17:26 ` George Anzinger
2003-12-16 20:54 ` Maciej W. Rozycki
2003-12-16 21:53 ` George Anzinger
2003-12-17 14:03 ` Maciej W. Rozycki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1070665864.3962.19.camel@athlonxp.bradney.info \
--to=cbradney@zip.com.au \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).