linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Bill Huang <bilhuang@nvidia.com>
To: <sameo@linux.intel.com>, <grant.likely@secretlab.ca>,
	<rob.herring@calxeda.com>, <rob@landley.net>
Cc: <broonie@opensource.wolfsonmicro.com>, <ldewangan@nvidia.com>,
	<thierry.reding@avionic-design.de>, <swarren@wwwdotorg.org>,
	<xxie@nvidia.com>, <lrg@slimlogic.co.uk>, <jhovold@gmail.com>,
	<kyle.manna@fuel7.com>, <rklein@nvidia.com>,
	<devicetree-discuss@lists.ozlabs.org>,
	<linux-doc@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	Bill Huang <bilhuang@nvidia.com>
Subject: [PATCH v2 1/2] mfd: dt: tps6586x: Add power off control
Date: Sun, 19 Aug 2012 18:07:55 -0700	[thread overview]
Message-ID: <1345424876-4365-2-git-send-email-bilhuang@nvidia.com> (raw)
In-Reply-To: <1345424876-4365-1-git-send-email-bilhuang@nvidia.com>

Add DT property "ti,system-power-controller" telling whether or not this
pmic is in charge of controlling the system power, so the power off
routine can be hooked up to system call "pm_power_off".

Based on the work by:
Dan Willemsen <dwillemsen@nvidia.com>

Signed-off-by: Bill Huang <bilhuang@nvidia.com>
Tested-by: Stephen Warren <swarren@wwwdotorg.org>
---
 .../devicetree/bindings/regulator/tps6586x.txt     |    6 ++++++
 drivers/mfd/tps6586x.c                             |   19 +++++++++++++++++++
 include/linux/mfd/tps6586x.h                       |    1 +
 3 files changed, 26 insertions(+), 0 deletions(-)

diff --git a/Documentation/devicetree/bindings/regulator/tps6586x.txt b/Documentation/devicetree/bindings/regulator/tps6586x.txt
index d156e1b..03dfa4e 100644
--- a/Documentation/devicetree/bindings/regulator/tps6586x.txt
+++ b/Documentation/devicetree/bindings/regulator/tps6586x.txt
@@ -18,6 +18,10 @@ Required properties:
 - vinldo678-supply: The input supply for the LDO6, LDO7 and LDO8
 - vinldo9-supply: The input supply for the LDO9
 
+Optional properties:
+- ti,system-power-controller: Telling whether or not this pmic is controlling
+  the system power.
+
 Each regulator is defined using the standard binding for regulators.
 
 Example:
@@ -30,6 +34,8 @@ Example:
 		#gpio-cells = <2>;
 		gpio-controller;
 
+		ti,system-power-controller;
+
 		sm0-supply = <&some_reg>;
 		sm1-supply = <&some_reg>;
 		sm2-supply = <&some_reg>;
diff --git a/drivers/mfd/tps6586x.c b/drivers/mfd/tps6586x.c
index 353c348..d08f59c 100644
--- a/drivers/mfd/tps6586x.c
+++ b/drivers/mfd/tps6586x.c
@@ -29,6 +29,10 @@
 #include <linux/mfd/core.h>
 #include <linux/mfd/tps6586x.h>
 
+#define TPS6586X_SUPPLYENE	0x14
+#define EXITSLREQ_BIT		BIT(1)
+#define SLEEP_MODE_BIT		BIT(3)
+
 /* interrupt control registers */
 #define TPS6586X_INT_ACK1	0xb5
 #define TPS6586X_INT_ACK2	0xb6
@@ -409,6 +413,7 @@ static struct tps6586x_platform_data *tps6586x_parse_dt(struct i2c_client *clien
 	pdata->subdevs = devs;
 	pdata->gpio_base = -1;
 	pdata->irq_base = -1;
+	pdata->pm_off = of_property_read_bool(np, "ti,system-power-controller");
 
 	return pdata;
 }
@@ -441,6 +446,15 @@ static const struct regmap_config tps6586x_regmap_config = {
 	.cache_type = REGCACHE_RBTREE,
 };
 
+static struct device *tps6586x_dev;
+static void tps6586x_power_off(void)
+{
+	if (tps6586x_clr_bits(tps6586x_dev, TPS6586X_SUPPLYENE, EXITSLREQ_BIT))
+		return;
+
+	tps6586x_set_bits(tps6586x_dev, TPS6586X_SUPPLYENE, SLEEP_MODE_BIT);
+}
+
 static int __devinit tps6586x_i2c_probe(struct i2c_client *client,
 					const struct i2c_device_id *id)
 {
@@ -505,6 +519,11 @@ static int __devinit tps6586x_i2c_probe(struct i2c_client *client,
 		goto err_add_devs;
 	}
 
+	if (pdata->pm_off && !pm_power_off) {
+		tps6586x_dev = &client->dev;
+		pm_power_off = tps6586x_power_off;
+	}
+
 	return 0;
 
 err_add_devs:
diff --git a/include/linux/mfd/tps6586x.h b/include/linux/mfd/tps6586x.h
index f350fd0..08f109f 100644
--- a/include/linux/mfd/tps6586x.h
+++ b/include/linux/mfd/tps6586x.h
@@ -77,6 +77,7 @@ struct tps6586x_platform_data {
 
 	int gpio_base;
 	int irq_base;
+	bool pm_off;
 };
 
 /*
-- 
1.7.4.1


  reply	other threads:[~2012-08-20  1:08 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-08-20  1:07 [PATCH v2 0/2] mfd: dt: add power off support for Tegra20/Tegra30 Bill Huang
2012-08-20  1:07 ` Bill Huang [this message]
2012-08-20 11:34   ` [PATCH v2 1/2] mfd: dt: tps6586x: Add power off control Thierry Reding
2012-08-22 12:07     ` Bill Huang
2012-08-25  0:36       ` Bill Huang
2012-08-25  3:34         ` Stephen Warren
2012-08-27  5:40           ` Bill Huang
2012-09-05  0:28             ` Bill Huang
2012-08-20  1:07 ` [PATCH v2 2/2] mfd: dt: tps65910: add " Bill Huang
2012-09-11 10:25 ` [PATCH v2 0/2] mfd: dt: add power off support for Tegra20/Tegra30 Bill Huang
2012-09-11 10:46   ` Thierry Reding
2012-09-11 15:15     ` Stephen Warren
2012-09-11 16:08       ` Samuel Ortiz
2012-09-11 16:26         ` Stephen Warren
2012-09-11 18:56           ` Samuel Ortiz
2012-09-11 16:07 ` Samuel Ortiz

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1345424876-4365-2-git-send-email-bilhuang@nvidia.com \
    --to=bilhuang@nvidia.com \
    --cc=broonie@opensource.wolfsonmicro.com \
    --cc=devicetree-discuss@lists.ozlabs.org \
    --cc=grant.likely@secretlab.ca \
    --cc=jhovold@gmail.com \
    --cc=kyle.manna@fuel7.com \
    --cc=ldewangan@nvidia.com \
    --cc=linux-doc@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=lrg@slimlogic.co.uk \
    --cc=rklein@nvidia.com \
    --cc=rob.herring@calxeda.com \
    --cc=rob@landley.net \
    --cc=sameo@linux.intel.com \
    --cc=swarren@wwwdotorg.org \
    --cc=thierry.reding@avionic-design.de \
    --cc=xxie@nvidia.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).