From: Johan Hovold <johan@kernel.org>
To: Florian Fainelli <f.fainelli@gmail.com>
Cc: "David S. Miller" <davem@davemloft.net>,
netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
Bruno Thomsen <bth@kamstrup.dk>,
Sascha Hauer <s.hauer@pengutronix.de>,
Mark Rutland <mark.rutland@arm.com>,
Johan Hovold <johan@kernel.org>
Subject: [PATCH 03/10] net: phy: micrel: parse of nodes at probe
Date: Wed, 19 Nov 2014 12:59:16 +0100 [thread overview]
Message-ID: <1416398363-32306-4-git-send-email-johan@kernel.org> (raw)
In-Reply-To: <1416398363-32306-1-git-send-email-johan@kernel.org>
Parse the "micrel,led-mode" property at probe, rather than at config_init
time in the led-setup helper itself.
Note that the bogus parent->of_node bit is removed.
Signed-off-by: Johan Hovold <johan@kernel.org>
---
drivers/net/phy/micrel.c | 39 +++++++++++++++++++++------------------
1 file changed, 21 insertions(+), 18 deletions(-)
diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c
index 1b528137afd9..6a81aaca5b1c 100644
--- a/drivers/net/phy/micrel.c
+++ b/drivers/net/phy/micrel.c
@@ -79,6 +79,7 @@ struct kszphy_type {
struct kszphy_priv {
const struct kszphy_type *type;
+ int led_mode;
};
static const struct kszphy_type ksz8021_type = {
@@ -186,24 +187,9 @@ static int ks8737_config_intr(struct phy_device *phydev)
return rc < 0 ? rc : 0;
}
-static int kszphy_setup_led(struct phy_device *phydev, u32 reg)
+static int kszphy_setup_led(struct phy_device *phydev, u32 reg, int val)
{
-
- struct device *dev = &phydev->dev;
- struct device_node *of_node = dev->of_node;
int rc, temp, shift;
- u32 val;
-
- if (!of_node && dev->parent->of_node)
- of_node = dev->parent->of_node;
-
- if (of_property_read_u32(of_node, "micrel,led-mode", &val))
- return 0;
-
- if (val > 3) {
- dev_err(&phydev->dev, "invalid led mode: 0x%02x\n", val);
- return -EINVAL;
- }
switch (reg) {
case MII_KSZPHY_CTRL_1:
@@ -261,8 +247,8 @@ static int kszphy_config_init(struct phy_device *phydev)
type = priv->type;
- if (type->led_mode_reg)
- kszphy_setup_led(phydev, type->led_mode_reg);
+ if (priv->led_mode >= 0)
+ kszphy_setup_led(phydev, type->led_mode_reg, priv->led_mode);
return 0;
}
@@ -531,7 +517,9 @@ ksz9021_wr_mmd_phyreg(struct phy_device *phydev, int ptrad, int devnum,
static int kszphy_probe(struct phy_device *phydev)
{
const struct kszphy_type *type = phydev->drv->driver_data;
+ struct device_node *np = phydev->dev.of_node;
struct kszphy_priv *priv;
+ int ret;
priv = devm_kzalloc(&phydev->dev, sizeof(*priv), GFP_KERNEL);
if (!priv)
@@ -541,6 +529,21 @@ static int kszphy_probe(struct phy_device *phydev)
priv->type = type;
+ if (type->led_mode_reg) {
+ ret = of_property_read_u32(np, "micrel,led-mode",
+ &priv->led_mode);
+ if (ret)
+ priv->led_mode = -1;
+
+ if (priv->led_mode > 3) {
+ dev_err(&phydev->dev, "invalid led mode: 0x%02x\n",
+ priv->led_mode);
+ priv->led_mode = -1;
+ }
+ } else {
+ priv->led_mode = -1;
+ }
+
return 0;
}
--
2.0.4
next prev parent reply other threads:[~2014-11-19 12:03 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-11-19 11:59 [PATCH 00/10] net: phy: add device-type abstraction Johan Hovold
2014-11-19 11:59 ` [PATCH 01/10] net: phy: add static data field to struct phy_driver Johan Hovold
2014-11-19 11:59 ` [PATCH 02/10] net: phy: micrel: add device-type abstraction Johan Hovold
2014-11-19 11:59 ` Johan Hovold [this message]
2014-11-19 11:59 ` [PATCH 04/10] net: phy: micrel: add has-broadcast-disable flag to type data Johan Hovold
2014-11-19 11:59 ` [PATCH 05/10] net: phy: micrel: add generic clock-mode-select support Johan Hovold
2014-11-19 11:59 ` [PATCH 06/10] net: phy: micrel: add support for clock-mode select to KSZ8081/KSZ8091 Johan Hovold
2014-11-19 11:59 ` [PATCH 07/10] dt/bindings: reformat micrel eth-phy documentation Johan Hovold
2014-11-19 11:59 ` [PATCH 08/10] dt/bindings: add clock-select function property to micrel phy binding Johan Hovold
2014-11-20 9:08 ` Sascha Hauer
2014-11-19 11:59 ` [PATCH 09/10] net: phy: micrel: refactor interrupt config Johan Hovold
2014-11-19 11:59 ` [PATCH 10/10] net: phy: micrel: add copyright entry Johan Hovold
2014-11-20 16:18 ` [PATCH 00/10] net: phy: add device-type abstraction Florian Fainelli
2014-11-21 19:16 ` David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1416398363-32306-4-git-send-email-johan@kernel.org \
--to=johan@kernel.org \
--cc=bth@kamstrup.dk \
--cc=davem@davemloft.net \
--cc=f.fainelli@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=netdev@vger.kernel.org \
--cc=s.hauer@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).